707510
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
E8
NAP V145
10. NAP V145 Installation and Operation
The NAP V145 is a mono power amplier intended for use in audio-visual systems. The NAP V145 should be installed on a
dedicated equipment stand intended for the purpose and should be in its nal location before connecting cables or switching
on. Switch on the source and preamplier components, with the volume turned down, before switching on the NAP V145.
The NAP V145 power button is located on the front panel.
The NAP V145 is heavy and care should be taken when lifting or moving it. Make sure that the surface it is to be placed on
can support the full weight.
10.1 General Connections Notes
The negative input and output connections are all common.
The mains earth should always be connected regardless of
what other equipment is used. This only grounds the case
and the electrostatic screen within the transformer, and is
not connected to the signal negative. In order to avoid hum
loops, the signal negative of the whole system should be
connected to the mains earth (ground) in one place.
10.2 Protection Notes
If the ampliers external case reaches 70°C due to
prolonged running at high power, the mains supply will be
interrupted and the illuminated logo will switch o until
the amplier has cooled down. This may take up to thirty
minutes.
OPERATION OF THE AMPLIFIER’S THERMAL PROTECTION
SUGGESTS PROLONGED USE AT TOO HIGH A VOLUME
LEVEL. YOUR LOUDSPEAKERS MAY BE AT RISK IF THIS IS
THE CASE. THE VOLUME SHOULD BE REDUCED.
10.3 Loudspeaker Cable and Connectors
Only Naim Audio speaker cable should be used to connect
a loudspeaker to the output of the NAP V145. Custom Naim
Audio loudspeaker connectors are supplied to make the
connection and in order to comply with current European
safety regulations these should always be used.
DAMAGE TO THE AMPLIFIER MAY RESULT IF “HIGH
DEFINITION” CABLE OR ANY OTHER SPECIAL CABLE IS
USED TO CONNECT THE LOUDSPEAKERS.
Ensure when connecting speakers that they are “in phase.
That is, the positive and negative connection orientation at
both the speaker and amplier ends of the cable is the same
for both channels.
nc
-ve
input
Input
11. NAP V145 Connections
11.1 NAP V145 Rear
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim NAP 500 DR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim NAP 500 DR in de taal/talen: Engels als bijlage per email.

De handleiding is 1,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Naim NAP 500 DR

Naim NAP 500 DR Gebruiksaanwijzing - Nederlands - 16 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Deutsch - 44 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Deutsch - 16 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - English - 44 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Français - 44 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Français - 16 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Italiano - 46 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Italiano - 16 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Espanõl - 16 pagina's

Naim NAP 500 DR Gebruiksaanwijzing - Polski - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info