707509
19
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
E17
SUPERNAIT Integrated Amplifier
19 SUPERNAIT Introduction and Installation
The Supernait should be installed on a dedicated equipment stand intended for the
purpose. Do not stand it directly on top of another item of equipment. Care should
be taken to ensure that it is level. The amplifier should be installed in its final location
before connecting cables or switching on. Ensure that the volume is turned down before
switching on.
A variety of power supply upgrade, alternative preamplifier and alternative or additional
power amplifier options are possible for the Supernait. Diagrams illustrating the connection
of some of these are shown in Section 20.
The following Section 19 paragraphs describe installation features and functions specific
to the Supernait. Operational features common to all preamplifiers and integrated
amplifiers are described in Section 28.
19.1 Source Input Selection and Assignment
The input selection buttons arranged along the upper
bank select the source signal to be routed to the power
amplifier and the loudspeakers. The six buttons are labelled
cd, tuner, tape, av, aux1 and aux2.
Each input button may be assigned to analogue inputs
(via DIN, RCA Phono or 3.5mm jack sockets), or to digital
inputs via RCA Phono coaxial, “Toslink” or “mini-toslink”
optical sockets. The default settings and the assignment
setup procedure are detailed in Sections 19.2 and 19.3
respectively.
19.1.1 Analogue Inputs
The first four selection buttons (cd, tuner, tape and av) can
each be assigned to both a DIN input socket and a pair of
RCA Phono input sockets on the rear panel. The DIN and
Phono sockets for each input are internally wired in parallel
and should not be connected simultaneously.
The aux1 and aux2 selection buttons can each be
assigned to a pair of RCA Phono input sockets and a DIN
input socket on the rear panel respectively.
Note: The aux2 DIN input socket carries a power supply
output voltage appropriate for a Naim phono preamplifier.
19.1.2 Digital Inputs
The Supernait additionally provides four S/PDIF digital input
sockets - 2 RCA Phono coaxial and 2 “Toslink” optical - on
the rear panel. Any input selection button can be assigned
to one of these sockets.
Note: The digital inputs support stereo PCM audio only. If
the digital signal contains anything other than stereo PCM
audio (Dolby or DTS encoded programme material for
example) all outputs will be muted.
19.1.3 Front Panel Combined Input
An auxiliary front panel input socket is also provided. This
socket is a 3.5mm analogue “jack” input combined with
a digital “mini-Toslink” optical socket. The analogue input
is wired internally in parallel with the rear panel aux1 input
and the two must not be connected simultaneously.
The front panel input (analogue or digital) is automatically
selected (and the aux1 selection button automatically
assigned to it), whenever a plug is inserted in the socket.
Note: The Supernait is able to differentiate a digital source
from an analogue one at the front panel input if the digital
source is working when the plug is inserted.
Input selection will revert to that previously selected when
the front panel input plug is removed.
19.2 Default Input Selection Button and Input Socket Assignment
Input Selection Input Socket Input Socket
Button Assignment Type
cd Analogue Input 1 DIN/RCA Phono
tuner
Analogue Input 2 DIN/RCA Phono
tape
Digital Input 1 RCA Phono Coax
av
Analogue Input 4 DIN/RCA Phono
aux1
Digital Input 2 “Toslink” Optical
(See Note)
aux2
Analogue Input 6 DIN (with Naim phono stage power supply)
Note: Any plug inserted into the front panel socket will automatically provoke selection of
this input (digital or analogue) and will automatically assign it to the aux1 selection button.
Operational features
common to all
preamplifiers and
integrated amplifiers
are described in
Section 28
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim NAP 300 DR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim NAP 300 DR in de taal/talen: Engels als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Naim NAP 300 DR

Naim NAP 300 DR Gebruiksaanwijzing - Deutsch - 44 pagina's

Naim NAP 300 DR Gebruiksaanwijzing - English - 16 pagina's

Naim NAP 300 DR Gebruiksaanwijzing - Français - 44 pagina's

Naim NAP 300 DR Gebruiksaanwijzing - Italiano - 46 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info