707500
6
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
E4
Note: The AV Bypass feature must be used with care. It
bypasses the SUPERNAIT 2 volume control leaving any
signal connected to the av input to be passed to the
speakers at full volume.
Note: Inserting a headphone plug while AV Bypass
mode is selected temporarily returns the SUPERNAIT 2
to normal operation. Removing the headphone plug will
return the SUPERNAIT 2 to AV Bypass mode.
Note: The mute function is disabled when AV Bypass
mode is engaged.
4.7 Other Signal Inputs and Outputs
The SUPERNAIT 2 incorporates DIN bi-amp (output), RCA
phono sub out, DIN pre-amp out, and DIN power-amp in
sockets on its rear panel. In normal use the pre-amp out and
power-amp in sockets are connected by a link plug. The link
plug should be removed only in the following circumstances:
A power supply upgrade is to be used.
An alternative preamplier is to be used with the
SUPERNAIT 2 power amplier. See Section 4.8
An alternative power amplier is to be used with the
SUPERNAIT 2 preamplier.
Note: The power amp in socket carries a 24V DC power
supply output intended for Naim preampliers that
require an external power supply.
The SUPERNAIT 2 DIN bi-amp output socket provides a
preamp output signal that enables a second power amplier
to be used in conjunction with the SUPERNAIT 2 power
amplier.
The RCA phono sub out sockets provide a stereo output
intended for connection to an active subwoofer. The output
signal is a duplicate of the preamplier output. No low-pass
ltering is applied.
Diagrams 6.1,and 6.2 illustrate some applications of the
SUPERNAIT 2 preamp out, power amp in and bi-amp
sockets.
4.8 Power Amp Mode Operation
If a SUPERNAIT 2 is to be used as a stereo power amp only it
must be congured to operate in power amp mode:
With the SUPERNAIT 2 switched o, remove its rear
panel link plug and connect the interconnect cable
from the preamp or preamp power supply to the power
amp in socket
Switch on the SUPERNAIT 2. The mute button will
ash to indicate that the link plug has been removed.
Press and hold the mute button until it extinguishes.
The SUPERNAIT 2 is now in power amp mode. Its
volume control indicator and button illumination will
extinguish.
To return the SUPERNAIT 2 to normal operation, switch
it o, replace the link plug and switch it on again.
4.9 Power Supply Upgrades
The SUPERNAIT 2 preamplier can be upgraded through
the connection of an external Flatcap, Hi-Cap or Supercap
power supply. The SUPERNAIT 2 and external power
supply must be switched o when connections are made.
Switch on the external power supply rst followed by the
SUPERNAIT 2 when all connections are complete.
4.10 General Connections Notes
The SUPERNAIT 2 negative input and output connections for
each channel are common. The mains earth (ground) should
always be connected regardless of what other equipment is
used in conjunction with the amplier. The mains earth only
grounds the case and the electrostatic screen within the
transformer, and is not connected to the signal negative. In
order to avoid hum loops, the signal negative of the whole
system should be connected to the mains earth (ground) in
one place.
A signal ground connection is tted to the SUPERNAIT
2 rear panel. This is intended to be used to connect a
turntable pick-up arm signal earth only.
4.11 External Control and Interface
The SUPERNAIT 2 is tted on its rear panel with a 3.5mm
jack Remote In socket and a mini-USB interface socket.
The Remote In socket can be used for RC5 remote control
of the SUPERNAIT 2 via a wired connection or a remote IR
repeater.
The mini-USB socket enables rmware upgrades and
diagnostic tests to be carried out. Contact your Naim
retailer for more information if required.
Note: The mini-USB interface is not intended for the
connection of USB memory devices.
SUPERNAIT 2
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim NAIT 5SI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim NAIT 5SI in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Naim NAIT 5SI

Naim NAIT 5SI Gebruiksaanwijzing - Nederlands - 22 pagina's

Naim NAIT 5SI Gebruiksaanwijzing - Deutsch - 22 pagina's

Naim NAIT 5SI Gebruiksaanwijzing - Français - 22 pagina's

Naim NAIT 5SI Gebruiksaanwijzing - Italiano - 22 pagina's

Naim NAIT 5SI Gebruiksaanwijzing - Espanõl - 22 pagina's

Naim NAIT 5SI Gebruiksaanwijzing - Polski - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info