707514
19
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
E17
Preamplifier Operation
14 Preamplifier Operation
Many operational and control features of Naim preamplifiers are common to all and are based
on a similar user interface. This section of the manual describes those features and the user
interface, drawing attention to differences between products where they occur. Table 14.9
sets out some variations in user interface between products.
Front panel controls are duplicated on the remote control handset which may also provide
some extra functions. See Sections 15 and 16 for more information.
14.1 Automatic Input Switching
With Automatic Input Switching engaged the appropriate
source input will be selected as soon as any handset function
for that (Naim) source component is operated. For example, if
the tuner input is selected and the cd play key is pressed on the
handset, the preamplifier will automatically switch to the cd input.
Automatic Input Switching can be programmed to operate on any
combination of the cd, tuner, av and hdd (NAC 152 XS only) input
buttons (and sockets to which they are assigned).
To enable Automatic Input Switching, first switch the
preamplifier into program mode by pressing and holding the
handset prog key (with the handset in preamplifier mode).
The front panel mon button (NAC552 mono and NAC 152XS
mute buttons) will illuminate if automatic switching is already
enabled. If it is not enabled it can be switched on by pressing
the same button.
With automatic switching enabled, pressing the button again
will reveal the inputs selected for auto switching by their
indicators illuminating for a short time. Repeated operation
of the button will sequentially select through each possible
combination of cd, tuner, av and hdd (NAC 152 XS only) inputs
and auto switching disabled (all indicators off). When the
desired inputs selected for auto switching are indicated, stop
pressing the button.
Automatic Input Switching only becomes operational on exit
from program mode by pressing and holding the handset prog
ke y.
Note: The preamplifier will leave program mode automatically if
no control commands are received for five minutes.
Note: In a few cases some further equipment configuration
may be required for auto switching to operate correctly. Please
contact your retailer or local distributor for advice.
14.2 AV Bypass
AV Bypass enables an audio-visual processor to be integrated
such that its volume control takes over command of signals
connected to selected preamplifier inputs. On the NAC 552 AV
Bypass may be selected on DIN input sockets 4 and 5. On all
other preamplifiers it may be selected on only the av input.
To select AV Bypass, first switch the preamplifier into program
mode by pressing and holding the handset prog key (with the
handset in preamplifier mode). The front panel source mute
button (NAC 202 mute button, NAC 152 XS av button) will
illuminate if AV Bypass is selected. If it is not enabled it can be
switched on by pressing the same button twice.
With AV Bypass enabled on the NAC 552, pressing the source
mute button again will reveal the inputs selected by their
indicators illuminating for a short time. Repeated operation of the
button will sequentially select each combination of the available
inputs, and AV Bypass disabled. When the desired inputs are
indicated, stop pressing the button. The selected inputs will then
be enabled for AV Bypass. The handset can also be used to select
AV Bypass. See table 14.9.
AV Bypass only becomes operational on exit from program
mode by pressing and holding the handset prog key.
Note: The preamplifier will leave program mode automatically if
no control commands are received for five minutes.
Note: The AV Bypass feature must be used with care. It
effectively by-passes the preamplifier volume and balance
controls leaving any signal connected to an AV Bypass input to
be passed to the power amplifier and speakers at full volume.
In order to reduce the potential for inadvertent mishap, any
subsequent modifications to input assignment will automatically
disable previously set up AV Bypass inputs. Additionally, if an
input is selected which has AV Bypass enabled, the preamplifier
volume and balance handset functions will be disabled and
their indicators will turn off. This will be flagged by the volume
or balance indicators flashing if either handset function is
operated.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim NAC 202 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim NAC 202 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Naim NAC 202

Naim NAC 202 Gebruiksaanwijzing - Nederlands - 24 pagina's

Naim NAC 202 Gebruiksaanwijzing - Deutsch - 24 pagina's

Naim NAC 202 Gebruiksaanwijzing - English - 12 pagina's

Naim NAC 202 Gebruiksaanwijzing - Français - 24 pagina's

Naim NAC 202 Gebruiksaanwijzing - Italiano - 24 pagina's

Naim NAC 202 Gebruiksaanwijzing - Espanõl - 24 pagina's

Naim NAC 202 Gebruiksaanwijzing - Polski - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info