707513
11
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
E9
NAC 282, NAC 202 & NAC 152 XS
10 NAC 282, NAC 202 and NAC 152 XS
Introduction and Installation
The NAC 282, NAC 202 and NAC 152 XS preamplifiers do not incorporate an internal power
supply but must be used in conjunction with either a Naim power amplifier incorporating
a preamplifier power output, or with an appropriate Naim power supply. The NAC 282 is
however supplied with a NAPSC power supply that provides power to its display and control
circuits. Diagrams 12.1 to 12.5 illustrate a variety of power supply connections and options.
The preamplifier and power supply, which may be a Naim power amplifier, should be installed
on a dedicated equipment stand intended for the purpose. Do not stand either directly on top
of another item of equipment. Care should be taken to ensure that the equipment stand is
level.
The preamplifier and power supply should be installed in their final locations before
connecting cables or switching on. Ensure that the preamplifier volume is turned down before
switching on.
The following paragraphs describe installation features and functions specific to the NAC 282,
NAC 202 and NAC 152 XS. Operational features common to all preamplifiers are described in
Section 14.
10.1 NAC 282
Source Inputs and Record Outputs
The NAC 282 provides both input and record output selection
buttons arranged in two banks on its front panel.
The input selection buttons are arranged along the upper bank
and select the source signal to be routed to the power amplifier
and the loudspeakers. Below them, in the lower bank, are a
corresponding array of buttons which select the signal to be
routed to the NAC 282 record outputs.
These separate source and record sections enable one source
(a CD player, for example) to be heard whilst the output from
another (say, the tuner) is simultaneously selected for recording.
Note: It is possible to lock the record controls and prevent
accidental de-selection during recording. Record-lock is
switched on or off by pressing the source mon button four times
within six seconds.
10.2 NAC 282 and NAC 202
Input Socket Assignment
The input selection buttons select the source input signal to be
routed to the power amplifier and the loudspeakers.
The NAC 282 and NAC 202 have six DIN input sockets and
two alternative pairs of RCA Phono sockets. The RCA Phono
sockets can be assigned individually to the cd and aux 2 input
buttons in place of the DIN sockets.
Input assignment setup is accessed through preamplifier
program mode. To switch into (or exit from) program mode
press and hold the prog key on the remote handset (with the
handset in preamplifier mode). Program mode is indicated by a
flashing indicator on the front panel volume control and, on the
NAC 282, the record selection button indicators extinguishing.
Note: If no function is operated within five minutes of entering
program mode the preamplifier will return to normal mode
automatically.
Once in program mode press and hold the remote handset
1 key to select or de-select the RCA Phono socket input for
cd, and the remote handset 6 key to select or de-select the
RCA Phono socket input for aux 2. The corresponding front
panel input buttons can similarly be used to select or de-select
the RCA Phono socket inputs. The appropriate input button
indicator will flash three times on selection of the RCA Phono
option and once on selection of the DIN option.
To exit from program mode press and hold the prog key on the
handset until the record select indicators are restored and the
volume indicator stops flashing.
10.3 NAC 282 and NAC 202 Record Mute
At times when the NAC 282 or NAC 202 record outputs are not
required it is good practice to mute them in order to minimise
power consumption and maximise sound quality.
10.3.1 NAC 282 Record Mute
To engage the NAC 282 record mute simply press the record
(lower) bank front panel mute button.
10.3.2 NAC 202 Record Mute
To engage or disengage the NAC 202 record mute press the
front panel mon button followed by the front panel mute
button. The mute button indicator will illuminate when record
mute is engaged and extinguish when it is disengaged. Record
mute can also be engaged and disengaged from the remote
handset using the mon and mute keys.
Operational features
common to all
preamplifiers are
described in Section 14
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Naim NAC 152 XS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Naim NAC 152 XS in de taal/talen: Engels als bijlage per email.

De handleiding is 3,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Naim NAC 152 XS

Naim NAC 152 XS Gebruiksaanwijzing - Nederlands - 24 pagina's

Naim NAC 152 XS Gebruiksaanwijzing - Deutsch - 24 pagina's

Naim NAC 152 XS Gebruiksaanwijzing - English - 12 pagina's

Naim NAC 152 XS Gebruiksaanwijzing - Français - 24 pagina's

Naim NAC 152 XS Gebruiksaanwijzing - Italiano - 24 pagina's

Naim NAC 152 XS Gebruiksaanwijzing - Espanõl - 24 pagina's

Naim NAC 152 XS Gebruiksaanwijzing - Polski - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info