You have just acquired a high precision instrument, manufac-
tured using the most up-to-date technology. The Skywatch
was designed to handle intense use and extreme condi-
tions. Please take the time to carefully read your instructions so
as to understand all the great features this unit has to offer.
Buttons Uses:
Turn your on by pushing either the
wind
or
mode
button.
Push the
wind
button to choose between maximum or average
wind speed.
Press and hold the
wind
button to switch the wind speed
measurement unit: km/h, m/s, knots or mph.
Push the
mode
button to choose between current temperature,
WindChill Factor, pressure, pressure historical records and
altitude.
Press and hold the
mode
button to switch temperature unit:
˚C or ˚F.
Extreme values of wind speed and temperature can be deleted
by pressing both the
wind
and
mode
buttons simultaneously.
Push the clock button to set the
clock
timer.
Current Temperature:
The temperature sensor is located on the left corner, over the
display. In the event of severe temperature changes, allow a
few moments for the sensor to reach the current temperature.
Select the current temperature with the
mode
button. Current temperature is displayed
at the bottom of the LCD either in ˚C or ˚F. To change the unit of measurement, press
the
mode
button for 2 seconds.
Please note that holding the instrument in your hands for a while may influence the
temperature reading. The sensor is very sensitive.
1. Button wind
2. Button clock
3. Button mode
All segments
of the LCD
1 2 3
Owner’s Instructions SKYWATCH
®
Geos
