602898
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
®
Owners Manual
Wireless Music System
SAVE THESE INSTRUCTIONS FOR LATER USE
FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO
EQUIPMENT.
1. Read instructions - All the safety and operating instructions should be read
before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained
for future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Clean only with dry cloth.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water-for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.
8. Accessories - Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or adult,
and serious damage to the product. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
9. A product and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the product and
cart combination to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
11. Power Sources - This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company.
The primary method of isolating the amplier from the mains supply is to
disconnect the mains plug. Ensure that the mains plug remains accessible at
all times. Unplug the AC power cord from the AC outlet if the unit will not be
used for several months or more. The socket-outlet shall be installed near the
equipment and shall be easily accessible.
12. Grounding or Polarization - Do not defeat the safety purpose of the polarized
or grounding - type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. When the provided plug
does not t into your outlet, consult an electrician for replacement of the obsolete
outlet.
13. Power Cord Protection - Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
14. Outdoor Antenna Grounding - If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
15. Lightning - For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightning and power line surges.
16. Power Lines - An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
17. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of re or electric shock.
18. Object and Liquid Entry - Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short out parts
that could result in a re or electric shock. Never spill liquid of any kind on the
product.
WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING,
AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON
THE APPARATUS. AS WITH ANY ELECTRONIC PRODUCTS, USE CARE NOT TO SPILL
LIQUIDS INTO ANY PART OF THE SYSTEM. LIQUIDS CAN CAUSE A FAILURE AND/OR A
FIRE HAZARD.
19. Damage Requiring Service - Unplug this product from the wall outlet and refer
servicing to qualied service personnel under the following conditions:
a When the power supply cord or plug is damaged.
b If liquid has been spilled, or objects have fallen into the product.
c If the product has been exposed to rain or water.
d If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualied technician to
restore the product to its normal operation.
e If the product has been dropped or damaged in any way.
f When the product exhibits a distinct change in performance-this indicates a
need for service.
20. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specied by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
re, electric shock, or other hazards.
21. Safety Check - Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
22. Heat - The product should be situated away from heat sources such as radiators,
heat registers, stoves or other products (including ampliers) that produce heat.
Battery shall not be exposed to excessive heat such as sunshine, re or the like.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
RESPONSIBLE PARTY
LENBROOK AMERICA
6 Merchant Street
Sharon, MA 02067
USA
Telephone: 800 263 4641
781 784 8586
Facsimile: 781 784 8386
WARNING
Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE
Shielded cables must be used with this unit to ensure compliance with the Class B
FCC limits.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Marking information is located at bottom of apparatus.
An appliance with a protective earth terminal should be connected to a mains outlet
with a protective earth connection.
IMPORTANT SAFETY INSTRUCTIONS
2
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada license-exempt RSS-210. Operation is
subject to the following two conditions: (1) this device may not cause Interference,
and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
no naked ame sources such as lighted candles should be placed on the
apparatus;
the use of apparatus in tropical climate
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN
EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE
PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION REGARDING PLACEMENT
To maintain proper ventilation, be sure to leave a space around the unit (from the
largest outer dimensions including projections) that is equal to or greater than shown
below.
Left and Right Panels: 10 cm
Rear Panel: 10 cm
WARNING
If this product is used at 240VAC, a suitable attachment plug should be used.
NOTES ON ENVIRONMENTAL PROTECTION
At the end of its useful life, this product must not be disposed of with
regular household waste but must be returned to a collection point for
the recycling of electrical and electronic equipment. The symbol on the
product, owner’s manual and packaging, point this out.
The materials can be reused in accordance with their markings.
Through re-use, recycling of raw materials or other forms of recycling of old products,
you are making an important contribution to the protection of our environment. Your
local administrative oce can advise you of the responsible waste disposal point.
INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES
DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL
OF EUROPEAN UNION FOR EUROPEAN CUSTOMERS ONLY
Batteries bearing any of these symbols indicate that
they should be treated as “separate collection” and not
as municipal waste. It is encouraged that necessary
measures are implemented to maximize the separate
collection of waste batteries and to minimize the disposal
of batteries as mixed municipal waste.
End-users are exhorted not to dispose of waste batteries
as unsorted municipal waste. In order to achieve a
high level of recycling waste of batteries, discard waste
batteries separately and properly through an accessible
collection point in your vicinity. For more information about collection and recycling
of waste batteries, please contact your local municipality, your waste disposal service
or the point of sale where you purchased the items.
By ensuring compliance and conformance to proper disposal of waste batteries,
potential hazardous eects on human health is prevented and the negative impact of
batteries and waste batteries on the environment is minimized, thus contributing to
the protection, preservation and quality improvement of the environment.
WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN
HAZARD
The remote control supplied with this product contains a coin/button
cell battery. If the coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from the children. If the battery compartment
does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside a part of the body,
seek immediate medical attention.
IMPORTANT SAFETY INSTRUCTIONS
3
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
Thank you for choosing NAD.
The NAD VISO 1 BT is for the purest who wants nothing but heart-
pounding, soul-stirring sound and the freedom of instant wireless
connection. Bluetooth aptX wireless high delity reception allows any
Bluetooth-enabled device to seamlessly integrate with the NAD VISO 1 BT.
Bluetooth aptX oers “hi-” performance and incredible sound quality.
Using NAD’s Direct Digital technology to eliminate all analog stages along
with their inherent noise and distortion, the NAD VISO 1 BT is a complete
digital device. NAD uses a sophisticated closed loop DAC technology to
directly power the speakers. Acoustic design is provided by NAD’s sister
company, PSB Speakers, and the amplication and acoustic design is
fully integrated to create very impressive synergies. The result is a shelf
system with enough acoustic power to ll a large room, guaranteed lowest
distortion and widest frequency response.
As with all our products, NAD’s “Music First” design philosophy guided the
VISO 1 BT design that it can condently promise you both state-of-the-art
technology and audiophile-quality music listening for years to come.
We encourage you to take a few minutes now to read right through this
manual. Investing a little time here at the outset might save you a good
deal of time later, and is by far the best way to ensure that you make the
most of your investment in the VISO 1 BT.
For warranty information contact your local distributor.
NAD SHALL NOT BE HELD LIABLE FOR ANY TECHNICAL OR USER
INTERFACE DISCREPANCIES IN THIS MANUAL.THE VISO 1 BT
OWNER’S MANUAL MAY BE SUBJECT TO CHANGE WITHOUT PRIOR
NOTICE. CHECK OUT WWW.NADELECTRONICS.COM FOR THE
LATEST VERSION OF THE VISO 1 BT OWNER’S MANUAL.
WHAT’S IN THE BOX
Packed with your VISO 1 BT you will nd
VISO 1 BT accessories box containing the following
Two detachable mains power cord
The VISO 1 BT remote control with 3V CR2025 battery
Cleaning cloth
VISO 1 BT Quick Setup Guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your VISO 1 BT
arrived. Should you move or otherwise need to transport your VISO 1 BT,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
CHOOSING A LOCATION
Provide enough space (at least10 cm) around the VISO 1 port to allow air
ow freely. Ensure that there is a clear line of sight, within 25 feet/8 meters,
between the VISO 1 BTs front view and your primary listening/viewing
position - this will allow reliable infrared remote control communications.
INTRODUCTION
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2015, NAD Electronics International, a division of Lenbrook Industries Limited
4
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
IDENTIFICATION OF CONTROLS
1 ON/OFF BUTTON
Press this button to switch ON the VISO 1 BT. When ON/OFF button
is pressed to power up the VISO 1 BT, the blue POWER indicator
ashes continuously eventually turning to solid blue.
Press again the ON/OFF button to switch OFF the VISO 1 BT. The
blue POWER indicator is turned o with the VISO 1 BT shut down.
2 UPGRADE
VISO 1 BT may need a software update to be in step with the latest
technology trends. Connect to this input a USB memory stick
containing the software update.
Only authorized NAD distributors or service centers are allowed to
implement a software update.
Check with your authorized NAD distributors for future software
updates.
Connect to this input a USB memory stick containing the software
update. Use USB adaptor when necessary.
3 OPTICAL (S/PDIF) IN
Connect OPTICAL IN of VISO 1 BT to the corresponding optical
digital output of sources such as CD, DVD or BD players, digital cable
box, digital tuners and other applicable components.
4 AC MAINS INPUT
The VISO 1 BT comes supplied with a separate detachable mains
power cord. There are 2 supplied power cords – select applicable
type for your usage. Before connecting the plug to the mains
powers source, connect rmly rst the other end to VISO 1 BTs AC
Mains input socket.
Always disconnect the mains power plug from the mains power
source rst, before disconnecting the cable from the VISO 1 BT’s AC
Mains input socket.
Power Rating: 100 - 240V ~50/60Hz 35W.
5 S, +/-
Toggle “S” button to switch between Bluetooth device and Optical
(S/PDIF) source mode.
Press “+” to increase the volume level; “ - ” to lower it.
Pressing “+” or “ - ” will restore audio from mute mode.
6 POWER INDICATOR
When ON/OFF button is pressed to power up the VISO 1 BT, the
blue POWER indicator ashes continuously eventually turning to
solid blue.
The blue POWER indicator is turned o with the VISO 1 BT shut
down.
The blue POWER indicator will ash when the source is changed or
a remote control command is received.
S
VISO 1
1
2
5
6
3
4
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
VISO 1 REMOTE CONTROL
S Select a Source.
+/- Increase or decrease audio level.
X Temporarily mute audio output or restore audio from mute mode.
The following remote control commands are not applicable for VISO 1 BT - 9, 0, uj
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
SOURCE SELECTION
There are two Sources that VISO 1 BT can select. These are
1 Bluetooth device
2 Optical (S/PDIF) source
VISO 1 BT will output the audio from any of the above sources upon
successful detection or connection.
BLUETOOTH DEVICE
Bluetooth creates wireless connection between compatible devices by
being paired together.
1 Ensure that your Bluetooth device is active or turned ON.
2 Pair Bluetooth device with the unique device ID of VISO 1 BT (NAD VISO1
OOBE30 in this example). Upon successful pairing, select Bluetooth as a
source and start music playback from your Bluetooth device.
OPTICAL S/PDIF SOURCE
Connect OPTICAL IN of VISO 1 BT to the corresponding optical digital
output of sources such as CD, DVD or BD players, digital cable box, digital
tuners and other applicable components.
RESTORING VISO 1 BT TO ITS FACTORY DEFAULT SETTINGS
You may restore your VISO 1 BT to its factory default settings. Resetting
your VISO 1 BT may address the remote possibility of your VISO 1 BT
exhibiting some glitches or inadvertent functionality issues. Follow the
procedure below to reset your VISO 1 BT.
1 Press and hold “+” and then press ON/OFF button to turn ON the
VISO 1 BT.
2 Release “+” when the POWER indicator turns blue and ash three times.
VISO 1 BT will continue on to initialize.
VISO 1 BT OPERATION
^
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
www.NADelectronics.com
©2015 NAD ELECTRONICS INTERNATIONAL
A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
While every effort has been made to ensure the contents are accurate at the time of publication, features and specifications may be subject to change without prior notice.
VISO1BT_ENG_OM_V07  MAR 2015
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD VISO 1 BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD VISO 1 BT in de taal/talen: Engels als bijlage per email.

De handleiding is 1,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van NAD VISO 1 BT

NAD VISO 1 BT Gebruiksaanwijzing - Français - 8 pagina's

NAD VISO 1 BT Gebruiksaanwijzing - Svenska - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info