Handleiding NAD T 785 (pagina 37 van 52) (Engels)

602918

Verklein

Vergroot

Pagina terug

1/52

Pagina verder

4 The strength of the incoming signal can be shown on the VFD by

pressing the [ENTER] button. The more segments visible in the lower

display line, the stronger the signal. By changing the position of the

antenna, you can increase the signal strength. You can also opt for an

external antenna. Consult an antenna professional for more information.

NOTE

 “NoServiceList”willalsobeshownintheVFDwhennostationsare

foundafterthescanningprocess.Ifthisoccurs,checktheconnection

andpositionoftheDABantennaorcallyourlocalDABbroadcast

providersforcoverageinformation.

SERVICE LIST

Follow the steps below to select through the DAB service stations found.

1 At DAB mode, press [TUNE / ] to step through the list of

available stations as shown in the lower display line of the VFD.

2 Press [ENTER] to select the desired station.

DAB TUNER MODE

Aside from “Full Scan” and “Local Scan” as already described above, pressing

the [TUNER MODE] button will also present you with other options namely

– Station Order, DRC, Manual Scan, Prune List and Reset

STATION ORDER

Use “Station Order” to sort the sequence of the listed stations. There are

three orders – Alphanumeric, Ensemble and Active.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “Station Order”. Press [ENTER].

2 Toggle [TUNE / ] to select through “Alphanumeric”, “Ensemble”

and “Active”.

3 Press [ENTER] to select desired station order.

ALPHANUMERIC

This is the default setting. Stations are arranged by numbers rst and then

alphabetically by letters.

ENSEMBLE

Digital radio is broadcast as groups of data called ensemble. Each ensemble

contains a number of stations, transmitted at a set frequency. When

“Ensemble” is selected as the mode of station order, the radio stations are

arranged in the order of their ensemble names.

NOTE

 Ensembleisalsointerchangeablytermedas“multiplex”byother

broadcast providers.

ACTIVE

Active stations are listed at the top of the channel list. Those channels

that are in list but have no service in the area will be displayed last in the

channel list.

DRC

The level of compression of stations can be set to eliminate the dierences

in dynamic range or sound level between radio stations. Popular music

would normally be more compressed than classical music, resulting in

possible dierent audio levels when changing from one station to the

other. Setting the DRC to “0” means no compression, “1/2” indicates medium

compression and “1” shows maximum compression. No compression is

recommended, especially for classical music.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “DRC”. Press [ENTER].

2 Toggle [TUNE / ] to select through “DRC 0”, “DRC ½”and “DRC 1”.

3 Press [ENTER] to select desired DRC level.

MANUAL SCAN

This option allows you to directly tune to a desired channel and include it

in the service list (if not yet available at the time). You can also use manual

scan to assist you in positioning the DAB antenna for best reception of the

desired channel.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “Manual Scan”. Press

[ENTER]. The current channel and frequency are shown in the upper line

of the VFD. The “bars” at the lower line of the VFD indicate the signal

strength level of the current channel.

2 To select other channels, toggle [TUNE / ] to step through the

channel list. Release [TUNE / ] when you have arrived at your

desired channel. Channel and frequency are shown in the upper line

of the VFD. The “bars” at the lower line of the VFD indicate the signal

strength level of the current channel. To improve the reception of the

selected channel, adjust or reposition the DAB antenna until the best

reception is indicated.

3 Press [ENTER] to tune the selected channel.

NOTE

 Thenumberofensemblesandstationsthatcouldbescannedwillvary

depending on your location.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The

“Prune List” option enables the deletion of these inactive stations in the

service list.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “Prune List”.

2 Press [ENTER]. Any inactive stations are automatically deleted.

OPERATION

USING THE T 785  AM/FM/DB/iPod

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

NAD T 785 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van NAD T 785

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info