493494
9
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
4 7.1 CHANNEL INPUT
Connect to the corresponding analog audio output of a
multichannel source component such as a DVD-Audio or
multichannel-SACD player or external multichannel decoder (disc
copy protected formats only allow analog signal transfer). Typically,
these sources will produce 5.1-channel output, in which case the
Surround Back jacks are left unconnected. The signal present at
these jacks can be heard by selecting Source 7 (7.1 CHANNEL INPUT
is defaulted to this Source).
There is no bass-management or other processing (other than
master-volume control) available to this 7.1 channel input.
While the multichannel audio output of a DVD/BD player can be
connected to these jacks, using the T 777’s own Dolby Digital and
DTS decoding and digital-analog converters via a digital connection
will usually produce superior results.
5 XM MODULE INPUT (120V version model only)
With XM radio, there are more than 100 channels of music, news, sports,
comedy, talk and entertainment. You will nd that the coverage is
continent wide. The music quality is digital with many commercial-free
music channels.
Connect XM radio cable to this socket. Follow the instructions that
came with your XM radio.
Refer also to the “LISTENING TO XM RADIO” segment of the
“OPERATION” section.
NOTE
The external XM radio is not supplied with your T 777.
DAB MODULE INPUT (230V version model only)
The T 777 is compatible only with the NAD DAB Adaptor module
models DB 1 or DB 2. With DAB, you can receive CD-like quality
programs without any annoying interference and signal distortion.
Plug-in the other end of the Mini-Din connector from the NAD DAB
Adaptor module output port into this socket.
Refer also to the item about “LISTENING TO DAB RADIO” segment of
the “OPERATION” section.
NOTE
The external NAD DAB Adaptor module is not supplied with your T 777.
6 SOFT CLIPPING
Enables NAD’s proprietary Soft Clipping circuitry on all channels.
At ON position, Soft Clipping gently limits the output of the T 777 to
minimize audible distortion should the T 777 be over-driven.
Soft Clipping may simply be left ON at all times to reduce the
likelihood of audible distortion from excessive volume settings.
However, for critical listening and to preserve optimum dynamics,
you may wish to defeat it by setting this switch to OFF.
7 RS 232
NAD is a certied partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the T 777
via compatible external controllers.
Refer to the NAD website for information about RS232 Protocol
documents and PC interface program.
8 FM ANTENNA TERMINAL
The supplied wire dipole” FM antenna will connect to the FM
connector using the supplied “balun” adapter. It will usually work
best when mounted on a vertical surface such as a wall, with arms
fully outstretched forming a horizontal T perpendicular to the
origin point of the signal.
AM ANTENNA TERMINAL
The AM loop antenna supplied with the T 777 (or a suitable
replacement) is required for AM reception.
Connect the supplied AM loop antenna to these terminals. If an
external AM antenna is used, make connections to the AM and GND
terminals in accordance with the instructions supplied with the
antenna.
Testing dierent positions for the antenna may improve reception;
vertical orientation will usually produce the best results. Antenna
proximity to large metal objects (appliances, radiators) may impair
reception, as will as attempts to lengthen the wire to the loop.
Refer also to the item about ASSEMBLING THE LOOP ANTENNA at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
9 +12V TRIGGER OUT
The T 777 has three +12V TRIGGER OUT ports (OUT 1, OUT2 and OUT3)
that can be congured to supply +12V DC to a linked component or
system. See discussion on Trigger Setup at the “Setup Menu” literature
for guidelines on how to congure +12V TRIGGER IN/OUT.
Use a 3.5mm mini-jack connector to pass +12 volts at a maximum
current of 50 milliamps to an auxiliary equipment such as a
multichannel amplier or subwoofer. The center conductor (hot) of
the 3.5mm jack is the control signal. The outside conductor (shield)
is the ground return-path.
This output will be 12V when the T 777 is ON and 0V when the unit
is either OFF or in standby mode.
+12V TRIGGER IN
With this input triggered by a 12V DC supply, the T 777 can be switched
ON remotely from standby mode by compatible devices such as
ampliers, preampliers, receivers, etc. If the 12V DC supply is cut o,
the T 777 will return to standby mode.
Connect this +12V Trigger input to the remote devices
corresponding +12V DC output jack using a mono cable with
3.5mm male plug. The controlling device must be equipped with a
+12V trigger output to use this feature.
10 IR IN/IR OUT 1-3
These mini-jacks accept and output remote-controlled codes in
electrical format, using industry-standard protocols, for use with “IR-
repeater” and multi-room systems and related technologies.
All NAD products with IR IN/IR OUT features are fully compatible
with the T 777. For non-NAD models, please check with your other
product’s service specialists as to their compatibility to the T 777’s IR
features.
IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another compatible device
to allow control of the T 777 from a remote location.
IR OUT 1, IR OUT 2
Connect IR OUT 1 (and/or IR OUT 2) to the IR IN jack of a compatible
device.
Command and control the linked compatible device by directing its
own remote control to T 777’s infrared receiver.
IDENTIFICATION OF CONTROLS
REAR PANEL
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD T 777 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD T 777 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van NAD T 777

NAD T 777 Gebruiksaanwijzing - Nederlands - 48 pagina's

NAD T 777 Gebruiksaanwijzing - Deutsch - 48 pagina's

NAD T 777 Gebruiksaanwijzing - Français - 50 pagina's

NAD T 777 Gebruiksaanwijzing - Italiano - 48 pagina's

NAD T 777 Gebruiksaanwijzing - Espanõl - 48 pagina's

NAD T 777 Gebruiksaanwijzing - Svenska - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info