667811
15
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Analog Gain: -12dB to 0dB. Gain adjustment allows all sources to play
back at the same volume level so you don’t need to adjust the volume
every time a new source is selected. It is generally preferable to reduce the
level of the loudest source rather than making louder the softer sources.
Sample Rate (48 kHz, 96 kHz, 192 kHz): Select the user’s preference
for sample rate of the Analog-to-Digital Converter. Higher sampling rates
allow for anti-aliasing lters to take eect further outside the audible
frequency range and are generally considered to sound better, especially in
the high frequencies. This option is applicable only for LINE 1 or LINE 2.
DIGITAL OUTPUT
SAMPLE RATE 48 kHz, 96 KHZ, 192 kHz
Audio inputs may come from various sources with dierent sampling rates.
Select 48 kHz, 96 kHz or 192 kHz to convert all digital audio output content
to single sampling rate.
CONTROL SETUP
AUTO STANDBY
Allows the option of the M32 going to standby mode after 15 minutes of
inactivity or remain at operating mode regardless of any source activities.
ON: M32 will automatically go to standby mode if there are no user
interface interaction and no active source within 15 minutes.
OFF: M32 remains at operating mode even if there is no user interface
interaction and no active source within 15 minutes. This is the default setting.
IR CHANNEL
The M32 has the capability to operate via Alternate IR channel. This is useful
if you have two NAD products that can be operated by similar remote
control commands. With alternate IR Channel, two dierent NAD products
can be controlled independently in the same zone by setting each one to a
dierent IR channel.
IR Channel Assignment
The M32 and the HTRM 2 remote control must be set to the same channel.
To change the IR Channel on the HTRM 2 remote control
Include a channel number before the library code. For HTRM 2, library
code “100” is the default library table for AMP device. To select this
AMP library table for “IR Channel 0”, retain the library code “100”.
If you want to load the AMP library table on “IR Channel 1”, prex the
library code with “1” to indicate association with “IR Channel 1”. Load
then the AMP library table using the code “1100”.
Sample setup of two NAD products on the same Zone
M32 and T 787 are both defaulted to IR Channel 0. If [OFF] button is pressed
on the HTRM 2 remote control (or HTR 8 remote control for the T 787), both
products will go to standby mode. Press [ON] and both products will power
up from standby mode.
To prevent both products from simultaneously going in and out of standby
mode along with other common commands, set each one to a dierent
IR channel. In this setup, we will keep T 787 and HTR 8 remote control
defaulted to “IR Channel 0”. As for M32, we will assign it to “IR Channel 1”;
the same applies to HTRM 2.
Set M32 and HTRM 2 to “IR Channel 1” via the following procedure.
M32
Select “1” as the IR Channel setting of the M32.
HTRM 2
Ensure the M32 is powered-up (“on”, not merely in standby).
1 Press and hold together the [AMP] and [A/V PSET] buttons until the
Learn LED (located between HTRM 2’s ON and OFF buttons) turns
steady green. Release both buttons.
2 While keeping the HTRM 2 pointed towards M32, press “1”, “1”, “0” and “0”
using HTRM 2’s numeric buttons.
3 Press [OFF]. If the M32 goes to standby mode, this indicates that the
library input is successful.
4 Press [ENTER] to accept the library code input and exit the Library
mode.
With both M32 and HTRM 2 set to “IR Channel 1”, the M32 can now be
remotely controlled independent of the T 787.
NOTE
Performing a Factory Reset for HTRM 2 will result to a return to the
factory default “IR Channel 0” setting.
LISTENING TO COMPUTER
Use Type A to Type B cable connector to directly stream 24/192 PCM
content from your PC or MAC to the M32. Ensure that the Sound or Audio
device setting of your computer is set to “NAD USB Audio.
MINIMUM PC SYSTEM REQUIREMENT
Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7
FOR MAC USERS
Minimum Mac OS X Snow Leopard (version 10.6) and later versions
OPERATION
OTHER FEATURES
15
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD M32 DirectDigital DAC Amplifier bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD M32 DirectDigital DAC Amplifier in de taal/talen: Engels als bijlage per email.

De handleiding is 3,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van NAD M32 DirectDigital DAC Amplifier

NAD M32 DirectDigital DAC Amplifier Gebruiksaanwijzing - Nederlands - 24 pagina's

NAD M32 DirectDigital DAC Amplifier Gebruiksaanwijzing - Deutsch - 24 pagina's

NAD M32 DirectDigital DAC Amplifier Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info