667811
8
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
7 POWER
The POWER switch supplies the master AC mains power for the
M32.
When the POWER switch is set to ON position, the M32 goes to standby
mode as shown by the amber status condition of the front panel Power
indicator. Press the front panel Standby button or HTRM 2’s remote
control’s [ON] button to switch ON the M32 from standby mode.
If you do not intend to use the M32 for long periods of time (such
as when on vacation), switch o the POWER switch.
With POWER switched o, neither the front panel Standby button
nor HTRM 2 remote control’s [ON] button can activate the M32.
8 DIGITAL AES/EBU
Connect SACD/CD Players or processors to this XLR connector for
digital audio streaming.
High-end sources with higher sampling rates (176kHz and 192kHz)
should be connected to the AES/EBU IN connector.
9 COMPUTER
Use a Type A to Type B cable connector (not supplied), to interface
computer audio to this asynchronous Type B USB input to directly
stream 24/96 PCM content from your PC or MAC.
The Type A-style connector is a at, rectangular interface.
The Type B-style interface is square in shape and has beveled
corners on the top ends of the connector.
Refer to LISTENING TO COMPUTER in the OTHER FEATURES section
on the OPERATION page.
10 SERVICE
Use for servicing purposes only. Not for consumer use.
11 INPUT
PHONO: Input for a Moving Magnet (MM) phono cartridge. Connect
the twin RCA lead from your turntable to this input if you are using a
Moving Magnet cartridge.
LINE1, LINE 2: Input for line level sources such as CD player, tuner or
any compatible devices. Use a twin RCA-to-RCA lead to connect the
source devices left and right Audio Output to this input.
12 OUTPUT (PRE-OUT/SUBW)
These output terminals have dual function. They are used either as
PRE-OUT or SUBWOOFER terminals.
The M32 and associated external devices must be turned OFF always
before connecting or disconnecting anything to the OUTPUT sockets.
IMPORTANT
Set the “Sub Output” option under “Speaker Setup” settings to “ON” for
the OUTPUT terminals to function as Subwoofer out. On the other hand,
the OUTPUT terminals will function as PRE-OUT if the “Sub Output
option is set to “OFF”.
PRE-OUT
The PRE OUT/SUBW sockets make it possible for the M32 to be used
as a full range preamplier to an external power amplier.
Use a dual RCA cable to connect PRE-OUT/SUBW to the
corresponding analog audio input of compatible devices such as
ampliers, receivers or other applicable devices.
PRE-OUT/SUBW will be aected by the M32’s volume control
settings. Turn the VOLUME control to adjust the output level of the
PRE OUT/SUBW sockets.
SUBWOOFER
Use a dual RCA cable to connect PRE OUT/SUBW to the low level
input of a powered subwoofer.
Low frequency information up to 200Hz is sent to the connected
subwoofer via PRE OUT/SUBW.
13 AC MAINS INPUT
The M32 comes supplied with two separate mains power cords.
Select the mains power cord appropriate for your region.
Before connecting the plug to the mains power source, ensure that
it is rmly connected to the M32’s AC Mains input socket.
Always disconnect the mains power plug from the mains power
source before disconnecting the cable from the M32’s AC Mains
input socket.
14 FUSE HOLDER
Only qualied NAD service technicians can have access to this fuse
holder. Opening this fuse holder may cause damage thus voiding
the warranty of your M32.
15 GROUND TERMINAL
Ensure that the M32 is plugged-in to a grounded AC wall outlet.
If necessary, use this ground terminal to connect to ground a
phono or turntable source for PHONO input.
If a separate earth ground is necessary, use this terminal to ground
your M32. The M32 can be connected to ground by connecting a
ground lead wire or similar to this terminal. After insertion, tighten
the terminal to secure the lead.
NOTES
The above illustration shows the M32 being connected to ground via
a metal water pipe. There maybe other grounding conductor points
in your home. Consult with a licensed electrician to locate or install
a grounding conductor in your home. NAD is not responsible for
any malfunction, damage or costs associated with the installation,
connection, or grounding of your M32.
The grounding wire is not supplied with your M32.
IDENTIFICATION OF CONTROLS
REAR PANEL
8
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD M32 DirectDigital DAC Amplifier bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD M32 DirectDigital DAC Amplifier in de taal/talen: Engels als bijlage per email.

De handleiding is 3,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van NAD M32 DirectDigital DAC Amplifier

NAD M32 DirectDigital DAC Amplifier Gebruiksaanwijzing - Nederlands - 24 pagina's

NAD M32 DirectDigital DAC Amplifier Gebruiksaanwijzing - Deutsch - 24 pagina's

NAD M32 DirectDigital DAC Amplifier Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info