13
ENG
PROGRAMMING THE REMOTE CONTROL
7 Point the remote control to the component and press the BRAND button.
8 Press the number button on LCD screen that bears the first alphabetical character of
your brand name. (Please press the number button within 20 seconds of
programming).
Please note that pressing the number button once will only show the first letter in that
alphabet group. You will need to press again to obtain the other letters.
9 If the first code number assigned to the brand is the right one, it will turn off the
component. If it is not the right one or if it is not the right brand name, press the
Channel Up button. It will automatically send out a POWER OFF command either from
the next code number from the same brand or the code from the next brand. Keep the
Channel Up button pressed until it turns off the component. When the component
turns off, save the code by pressing the SAVE button on the LCD. Note: It is quite
possible that the code number that works with your component may have a different
brand name because of the way it was made by its manufacturer.
NOTE
Confirm that it is the right code number for your component by pressing other buttons
such as POWER, VOLUME, MUTE and CHANNEL, etc. If any of the buttons do not operate
as they should, please repeat from Step 5.
