493509
14
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
The C 725BEE’s internal AM/FM tuner oers very high quality sound
from radio broadcasts. The reception and sound quality will always be
dependent to a degree however on the type of antenna(s) used as well as
proximity to the broadcast origin, geography and weather conditions.
ABOUT ANTENNAS
The supplied ribbon-wire FM antenna can be connected to the rear-panel
FM-antenna input using the included “balun” adapter and should be fully
extended to form a T. This folded-dipole antenna will usually work best
when oriented vertically, with the arms of its T fully outstretched and
arranged perpendicular to the origin of the desired broadcast. There are
no “rules however, and experimenting freely with antenna placement and
orientation may yield the clearest sound and lowest background noise.
In areas of poor FM reception, an exterior FM antenna can improve
performance dramatically. If radio listening is important to you, consider
consulting an antenna installation professional to optimize your system.
The supplied AM loop antenna will usually provide adequate reception.
However, an exterior AM antenna can be used to improve reception.
Consult an antenna professional for more information.
ASSEMBLING THE LOOP ANTENNA
1 Rotate the outer frame of the antenna.
2 Insert the bottom edge of the outer frame into the groove on the stand.
3 Extend the antenna cord.
SELECTING BAND
Press the [TUNER] button on the front panel or on the remote control. Each
subsequent press of either key will toggle the unit among AM, FM and
DAB radio.
IMPORTANT NOTICE
In the foregoing sections about TUNER features, make sure to
set SR 8’s DEVICE SELECTOR to “TUN” for the applicable TUNER
commands to be eected.
TUNING STATIONS
1 Toggle [TUNE ] on the front panel or remote control to step up or
down between AM or FM frequencies.
2 Press and release [TUNE ] to search up or down - the C 725BEE’s
tuner will stop at the next suciently strong signal it encounters.
Pressing the [TUNE ] during the search process will stop the
search.
DIRECT TUNING
If you know your desired station’s frequency allocation, you can tune
directly to the station.
1 Toggle [ENTER] button to switch between “Preset” and Tune mode (see
the lower line of the VFD). Select Tune” mode.
2 Using the numeric keys of the remote control, key-in the frequency
allocation of the station and then press [ENTER]. For example, to enter
104.50 MHz, press “1”, “0”, “4”, “5” and “0” or press “1”, “0”, “4”, “5” and [ENTER].
SETTING RADIO PRESETS AM/FM/DAB
The C 725BEE can store a mix of your 40 favorite AM, FM and DAB
broadcasts for immediate recall.
1 To store a radio preset, rst tune the desired frequency (see above), then
press the front panel [MEMORY] button. The VFD will show a blinking
“MEMORY” icon and the next available vacant Preset number – for
example, “Preset _ _Free” (the two blank spaces will correspond to the
preset number that could be from ‘01’ to the maximum of ‘40’).
2 Press [MEMORY] button again to store the desired frequency on the
Preset number shown or use the [PRESET ] keys to select another
available Preset number.
3 Then, press [MEMORY] key button again. Your desired frequency is now
stored in the assigned preset.
The Radio Presets can be stored using the same keys on the front panel or
remote control.
RECALLING PRESETS
1 Use the [PRESET ] keys on the front panel to step up or down
between presets.
2 Press and hold [PRESET ] to “scroll” continuously up or down.
3 Stop or release the [PRESET ] key while scrolling to select a desired
Preset number – the stored station will be recalled after a brief delay;
or press [ENTER] to tune immediately to the selected Preset number.
Empty presets will be skipped during preset tuning.
The SR 8 remotes [PRESET ] keys work similarly.
DIRECT RECALL OF A PRESET
You can directly recall a desired Preset number.
1 Toggle SR 8 remote’s [ENTER] button to switch between “Preset” and
Tune” mode (see the lower line of the VFD). Select “Preset” mode.
2 Using the numeric keys of the remote control, key-in directly your
desired Preset number and then, press [ENTER]. For example, to enter
Preset 5, press “5” and then, press [ENTER].
DELETE A PRESET
You can empty a preset by deleting the stored information.
1 Select the Preset number to be deleted.
2 Press and hold [INFO] button and then press [MEMORY] button
– current stored preset setting will be erased.
OPERATION
LISTENING TO AM/FM RADIO
14
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD C 725 BEE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD C 725 BEE in de taal/talen: Engels als bijlage per email.

De handleiding is 1,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD C 725 BEE

NAD C 725 BEE Gebruiksaanwijzing - Nederlands - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Deutsch - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Français - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Espanõl - 24 pagina's

NAD C 725 BEE Gebruiksaanwijzing - Svenska - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info