Handleiding NAD C 546 BEE (pagina 11 van 16) (Engels)

493511

Verklein

Vergroot

Pagina terug

1/16

Pagina verder

CD-R AND CD-RW AUDIO DISCS

The C 546BEE can play back CD-R or CD-RW audio discs that have been

recorded on a computer or CD recorder. The quality of CD-R or CD-RW

audio discs varies widely which may aect playability. Some factors that

aect playability:

• The quality of the disc itself. Generally speaking, CD-R or CD-RW blanks from

well-renowned companies give better results than unbranded ones.

• The quality of CD-recorder or computer CD re/writer. Some recorders

and writers produce better results than others.

• The CD-R and CD-RW were created with high-speed writing. In general,

the quality of a CD-R or CD-RW is better when produced at a lower

speed against a higher speed on the same recorder or re/writer.

PLAYING MP3/WMA FILES

The C 546BEE can play MP3/WMA formatted recordings on CD-R or CD-RW

discs. You may mix any of the le types on the disc. Using the CD 9 remote

control, one can select through the MP3/WMA folders and les as well as

start playback through the following steps

1 Load the applicable disc.

2 Press [FOLDER D/F ] to select desired folder. Press [ENTER].

3 Press [FILE A/S ] to select desired le number. Press [ENTER] to start playback.

NOTES

• Thelenumberisrecognizedperdisc,notperfolder–thatis,the

number assigned to each le corresponds to their sequence in the disc.

• Ifyouwanttoselectlenumber“119”inadiscwherethereare100or

moreMP3/WMAles,press“1”twiceandthen“9.”

• Duringdiscplayback,itispossibletoselectthroughthefolderorlelists

(using [FOLDER

D/F

] or [FILE

A/S

] buttons) without interrupting the

current le being played back.

IMPORTANT NOTICE

Customers should note that permission is required in order to download

MP3/WMA les and music from the Internet. NAD ELECTRONICS

INTERNATIONAL has no right to grant such permission. Permission

should always be sought from the copyright owner.

PROGRAMMING

The program function enables you to store your favorite tracks from any

disc in the player memory. When programming a sequence of tracks, the

C 546BEE must be in STOP mode. Using the CD 9 remote control, enter your

desired program sequence through the following steps

1 Press [PROG] button of CD 9 remote control. The display indicates “P00

T000”. The “000” in the “T000” keeps on blinking, meaning the player is

awaiting the rst Program entry.

2 Use the Direct-Entry numeric keypad buttons to enter the rst track in

your planned sequence. For example, press “5” to enter track number

5. Upon entering the track number, the VFD will show “P01 T005” with

“005” of “T005” blinking 3 times.

3 The display will revert to show “P02 T000”, indicating that the player is

ready for your second program entry. For example, press “8” to enter

track number 8. Upon entering the second track, the VFD will show “P02

T008” with “008” of “T008” blinking 3 times.

4 Repeat steps 2 and 3 to select and store other track numbers in

memory, up to a maximum of 40 entries. When you reach P40, the three

blinking digits will keep on ashing and won’t stop. This is unlike the

previous 39 entries wherein after an entry blinked thrice, it moves on to

the next program number/entry.

5 Press [PROG] to end or nalize the program – the VFD will show the last

programmed number and track.

6 Press [u] to start playback of the rst programmed track. Rotate [PLAY/

PAUSE/SKIP] if you wish to SKIP forward/backward the programmed tracks.

NOTES

· Ifyouwanttoselectlenumber“119”inadiscwherethereare100or

moreMP3/WMAles,press“1”twiceandthen“9.”

· Pressing [g] key at any time during the programming procedure will put

to a STOP to the sequence and clear all the currently programmed tracks

orles.VFDwillrevertbacktodisplayingthetotalnumberoftracks

and total playback time for audio CD and total number of les for MP3/

WMA.

· Pressing [g]keytwiceduringprogramplaybackwillresulttohavingthe

whole program list deleted.

REVIEW/EDIT PROGRAM LIST

1 Initiate review of your programmed entries by pressing [PROG].

· If you are still in programming mode, press [PROG].

· If during program playback, press [g] once, then [PROG].

2 The VFD will show the rst Program Number and the corresponding

“blinking” programmed track.

3 To change the programmed track of a particular sequence, use the

Direct-Entry numeric keypad buttons. Press [9/0] to move forward

or backward the programmed tracks as well as review the list and

change if so desired.

4 If you want to delete a particular program sequence during program

review, press [CLEAR] key.

Example: Delete “P34 T067” from a total of 40 program entries

(display) “P34 T067” $ [CLEAR] $ (display) “P34 T000” (“000” blinking)

$ enter desired track/song number to replace T067 or press [PROG] to

nalize deletion process

If [PROG] is pressed without entering a new track/song number, the

total 40 program entries will be reduced to 39 entries. The program

sequence will adjust accordingly starting from the deleted program

number.

5 After nalizing your program changes or completing your review, press

[PROG] again.

PROGRAM PLAYBACK

1 To play the stored program, press [u] while you are in “PROGRAM”

mode. “PROG” icon will appear in the display, indicating that a stored

program is being played. During Program Play, the SKIP buttons will

access only the tracks in the program list.

2 If you want to play only a portion of a stored program, initiate play and

press SKIP to jump over the programmed tracks that you don’t want to

hear.

STOP OR DELETE PROGRAM

1 To terminate Program play, press [g] once. The stored track list remains

in memory. If you want to play the program again, simply press [u].

2 To clear the program memory, perform any of the following steps

· Press [g] twice during program playback.

· Press [k] to open the disc tray.

· Switch OFF the C 546BEE by pressing the Standby button.

· Switch to another source other than CD mode by pressing front

panel’s [SOURCE] button or [USB] source button in CD 9.

OPERATION

USING THE C 546BEE  CD MODE

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD C 546 BEE Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van NAD C 546 BEE

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info