493507
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
IDENTIFICATION OF CONTROLS
FRONT PANEL
1 STANDBY: With the rear panel POWER switch set to ON position,
press this button to switch ON the C 326BEE from standby mode.
The Standby LED indicator will turn from amber to blue. Pressing the
STANDBY button again turns the unit back to standby mode.
The C 326BEE can also be switched ON from standby mode by pressing
any of the front panel buttons.
AUTO STANDBY
Auto Standby feature is an integral feature of the C 326BEE that
conforms to European ecodesign regulations. When Auto Standby is
enabled, the C 326BEE will automatically go to standby mode if there is
no active input at current source or no user interface interaction within
30 minutes.
Auto Standby can be enabled or disabled by the following button
combinations and Standby LED indicator response. Execute below
steps while the C 326BEE is at operating mode.
Press and hold [AUX] button and then press Standby button. Observe
the number of times the Standby LED ashes.
• Auto Standby enabled : Standby LED ashes once.
• Auto Standby disabled : Standby LED ashes twice.
2 STANDBY LED: This indicator will light up amber when the C 326BEE
is in standby state. When the C 326BEE is at ON state, this indicator will
illuminate blue. When infrared command from the SR 8 is received, this
indicator will also ash momentarily.
In cases of serious abuse of the C 326BEE, such as excessively low
loudspeaker impedance and short circuit, the C 326BEE will engage its
Protection circuitry, indicated by the Standby LED turning from blue to
red and the sound being muted.
In such a case, turn the C 326BEE OFF by the rear panel POWER
switch, wait for it to cool down and/or check the speaker connections,
making sure the overall loudspeaker impedance doesn’t go below 4
ohms. Once the cause for the protection circuitry to engage has been
removed, switch ON the rear POWER switch and the STANDBY button to
resume normal operation.
3 SOFT CLIPPING INDICATOR: The blue SOFT CLIPPING LED shows
that the SOFT CLIPPING mode is engaged. Refer also to the item below
about SOFT CLIPPING at the IDENTIFICATION OF CONTROLS – REAR
PANEL.
4 REMOTE SENSOR: Point the SR 8 remote control at the remote
sensor and press the buttons. Do not expose the remote sensor of the
C 326BEE to a strong light source such as direct sunlight or illumination.
If you do so, you may not be able to operate the C 326BEE with the
remote control.
Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30o in each direction of the front of the remote sensor.
5 PHONES: A 1/4” stereo jack socket is supplied for headphone listening
and will work with conventional headphones of any impedance.
Inserting a headphone jack into this socket automatically switches o
the loudspeakers. The volume, tone and balance controls are operative
for headphone listening. Use a suitable adapter to connect headphones
with other types of sockets, such as 3.5mm “personal stereo jack plugs.
NOTE
Make certain that the volume control is turned to minimum (fully
counter-clockwise) before connecting or disconnecting headphones.
Listening at high levels can damage your hearing.
6 MP SOCKET: Using a 3.5mm stereo plug, connect into this socket the
audio output of a Media Player.
NOTES
If an external Media Player is connected to the front MP socket (using a
3.5mm stereo plug) while listening to a MP line-level source, the external
Media Player will be directly selected with the MP line-level source
immediately disconnected.
It is recommended to mute the volume or switch to a dierent input
before plugging/unplugging the external Media Player cable.
1
111095 6 7 8
2 3 4
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD C 326 BEE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD C 326 BEE in de taal/talen: Engels als bijlage per email.

De handleiding is 1,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD C 326 BEE

NAD C 326 BEE Gebruiksaanwijzing - Nederlands - 16 pagina's

NAD C 326 BEE Gebruiksaanwijzing - Deutsch - 16 pagina's

NAD C 326 BEE Gebruiksaanwijzing - Français - 16 pagina's

NAD C 326 BEE Gebruiksaanwijzing - Italiano - 16 pagina's

NAD C 326 BEE Gebruiksaanwijzing - Espanõl - 16 pagina's

NAD C 326 BEE Gebruiksaanwijzing - Svenska - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info