493663
1
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
SAFETY PRECAUTION
CAUTION:
The lightening flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to "dangerous voltage"
and to prevent from a risk
of electric shock.
Warning:
To reduce the risk of
electric shock, don't open
the cabinet. Refer
servicing to qualified
personnel only.
The exclamation point
within an equilateral
triangle is intended to
alert the user to important
operating and
maintenance (servicing).
WARNING: The apparatus shall not be exposed t
o dripping or splashing and
that no objects filled with liquids, such as vases, shall not
be placed on the
apparatus.
WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there
is the danger of fire.
WARNING: The unit should be con
nected to a power supply only of the type
descry bed
in the operating instructions or as marked on the unit. If you are not
sure of the type of power supply
(for example: 120 or 230V) to your home,
consult your local dealer or local power company.
WARNING: Do not open the cabinet or touch any parts in the inner mechanism.
Consult your local dealer for technical service if the opening is required.
WARNING: The mains plug is used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING: The battery of remote control should not be exposed excessive
heat such as sunshine, fire or the like.
WARNING: Maintenance man must use the appointed screw in the rear plate.
Note: Do not open the cabinet to avoid the unit direct exposure to radiation.
Unit Cleaning:
After the unit power is turned off, you can clean the cabinet,
panel and remote control with a soft cloth lightly moistened with a mild detergent
solution.
Attachments: Never add any attachments and/or equipment without
the
manufacturer consent; as such additions may result in the risk of fire, electric
shock or other personal injury.
Locating: Slots and openings in the cabinet are provided for ventilation to
protect it from overheating. Do not block these openings or
allow them to be
blocked by placing the STB
on a bed, sofa or other similar surface, nor should it
be placed over a radiator or heat register.
Power-Cord Protection: Place the power-
supply cord out of the way, where it
will not be walked on. Please take
special attentions to cords at plugs,
convenience receptacles and the point where they exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this STB through
openings, as they may touch dangerous voltage points or short-out pa
rts that
could result in a fire or electric shock. Never spill any liquid on the STB.
Note: Moisture may be formed inside the unit in the following conditions:
When the unit is suddenly moved from a cold environment or an air-
condition
room to a warm place.
Immediately after a heater has been turned on.
In a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To correct this
problem, turn on the power and wait about two hours for the moisture to
evaporate.
Parts Replacement: When the unit parts need to be replaced, user should
make sure the service technician use the replacement parts specified by the
manufacturer or having the same characteristics as the original part.
Unauthorized replacement may put the uni
t in the risk of fire, electric shock or
other hazards.
Safety Check: After all the maintenances and repairs are done, user is required
to request the service technician to conduct the overall safety check to ensure
the machine is in the proper condition.
1
Contents
Contents
1. Remote Control & Panel Description ............................................................... 3
1.1 Front Panel Description ...................................................................................3
1.2 Rear Panel Description ....................................................................................4
1.3 Remote Control Description .............................................................................5
2. Basic Operations ................................................................................................ 6
2.1 Switch on STB .................................................................................................6
2.2 Standby Mode .................................................................................................6
2.3 Mute ...............................................................................................................7
2.4 Audio ..............................................................................................................7
2.5 TV/STB ...........................................................................................................7
2.6 TV/Radio .........................................................................................................7
2.7 SLEEP ............................................................................................................7
2.8 SUB ................................................................................................................7
2.9 TXT .................................................................................................................8
2.10 P/N ...............................................................................................................8
2.11 RECALL ........................................................................................................8
2.12 Channel Number ...........................................................................................8
2.13 PGUP / PGDN ...............................................................................................8
2.14 SAT...............................................................................................................8
2.15 FAV +/- .........................................................................................................9
2.16 EPG ..............................................................................................................9
2.17 FAV............................................................................................................. 10
2.18 CH/ ...................................................................................................... 10
2.19 V◄/ ......................................................................................................... 10
2.20 OK .............................................................................................................. 10
2.21 MENU ......................................................................................................... 11
2.22 EXIT............................................................................................................ 11
2.23 PAUSE........................................................................................................ 11
2.24 ZOOM ......................................................................................................... 11
2.25 EDIT ........................................................................................................... 12
2.26 INFO ........................................................................................................... 12
2.27 USB ............................................................................................................ 12
2.28 MP3 ............................................................................................................ 12
2.29 JPEG .......................................................................................................... 12
2.30 PVR LIST .................................................................................................... 12
2.31 A-B ............................................................................................................. 13
2.32 T.S. ............................................................................................................. 13
2.33 GOTO ......................................................................................................... 13
2.34 ................................................................................................................ 13
2.35 ................................................................................................................ 14
2.36 ◄◄/►► ..................................................................................................... 14
2.37 ►II .............................................................................................................. 14
2.38 ►I◄ ........................................................................................................... 14
2.39 I◄◄/►►I ................................................................................................... 14
2.40 No Signal! ................................................................................................... 14
3. Channel ............................................................................................................. 15
3.1 TV Channel List ............................................................................................. 15
3.1.1 Favorite................................................................................................ 16
3.1.2 Move ................................................................................................... 16
3.1.3 Sort...................................................................................................... 17
2
Contents
3.1.4 Edit ...................................................................................................... 17
3.1.5 Find ..................................................................................................... 19
3.2 Radio Channel List ........................................................................................ 19
3.3 Channel Setup .................................................. ¡Error! Marcador no definido.
3.4 Favorite group list name .................................... ¡Error! Marcador no definido.
3.5 Delete All .......................................................... ¡Error! Marcador no definido.
4. Installation ........................................................................................................ 21
4.1 Auto Scan ..................................................................................................... 21
4.2 Channel Scan ................................................................................................ 21
4.3 Channel Setup .................................................. ¡Error! Marcador no definido.
4.4 Aerial Adjustment .............................................. ¡Error! Marcador no definido.
5. System Setup ................................................................................................... 22
5.1 Language ...................................................................................................... 22
5.2 TV System .................................................................................................... 23
5.3 Time & Timer Setting ..................................................................................... 30
5.4 OSD Setting .................................................................................................. 23
5.5 Parental Lock ................................................................................................ 26
5.6 Power setting ................................................................................................ 27
6. Tools ................................................................................................................. 28
6.1 Information .................................................................................................... 28
6.2 Quick Setup ...................................................... ¡Error! Marcador no definido.
6.3 Factory Default .............................................................................................. 22
6.4 Software Upgrade.......................................................................................... 28
6.4.1 USB-STB Upgrade ............................................................................... 28
6.4.2 STB-STB Upgrade ................................... ¡Error! Marcador no definido.
6.4.3 Backup To USB.................................................................................... 29
6.6 CAS .............................................................................................................. 37
7. Media Management .......................................................................................... 30
7.1 Media List ..................................................................................................... 30
7.1.1 All ........................................................................................................ 33
7.1.2 Music ................................................................................................... 35
7.1.3 Picture ................................................................................................. 35
7.1.4 Video ................................................................................................... 36
7.1.5 Music List ............................................................................................. 36
7.1.6 Picture List ............................................... ¡Error! Marcador no definido.
7.1.7 Video list .............................................................................................. 36
7.1.8 Record list ............................................................................................ 36
7.2 Media Control ................................................................................................ 39
7.3 Disk Information ............................................................................................ 39
8. Technical Specification .................................................................................... 40
3
Remote Control & Panel Description
1. Remote Control & Panel Description
1.1 Front Panel Description
1 LED POWER Mode indicator (LED) – red light in operating and standby
mode.
2 POWER Is used to switch between the working mode and the
standby mode.
3 LED LOCK Blue light when receiving a channel signal.
4 VOL+/-
To change volume to move cursor, change numbers
in the menu or to change the choice
5 MENU
To enter into the main menu and exit all menus.
6 OK
To select an item in the menu and confirm it or pop
up channel list when no menu.
7 CH+/- To change
channels or for navigating and changing
values in menus.
8 Remote Sensor Detects the infrared signals from the remote control unit.
4
Remote Control & Panel Description
1.2 Rear Panel Description
1 ANTENNA IN Terr. input of the digital tuner.
2 LOOP OUT Terr. output for cascading to others devices.
3 TV SCART Output SCART for the connection to a TV set.
4 USB
To connect with USB disk.
5 HDMI
HDMI output for the connection to a TV set.
6 OPTICAL S/PDIF
Optical output for digital audio (AC3)
7
CVBS video output for TV AV in.
8 AUDIO HiFi output for stereo set.
9 Y Pb Pr
Component Out
10 AC IN Mains input cable.
11 POWER ON/OFF Allows to completely switch off the receiver.
5
Remote Control & Panel Description
1.3 Remote Control Description
6
Basic Operations
2. Basic Operations
2.1 Switch on STB
Switch the [Device’s Main Power] switch on.
When the STB is first used it will displayQuick Setup” window. you will set
Language, First Audio, Second Audio, LNB Power, Antenna Setup and Multi
Search.
? Frequently Asked Question
Q: The power of my STB is on and it is running in TV mode but the TV
screen shows nothing:
A: Make sure the TV set has been set to the correct video input(not the
TV channels). For example, if you have connected the unit to the
video1 input of the TV set then you need to select the corresponding
input of the TV. Mostly it is done with the AV button of the TVs remote
control unit.
Q: My STB is running in TV mode but the TV screen shows nothing
except one ball and “No Signal”.
A: That means the channel you selected has no signal. This can be
caused by several reasons:
1. The channel you selected is not from the satellite to which your dish is
pointing. Select another channel.
2. The signal of current TV channel is too weak. You can try to change to other
channels with a stronger signal. If the problems still exist, please consult
your local dealer or installer for technical service.
3. You selected the wrong LNB type in the installation menu or your DiSEqC
switch configuration is not correct.
2.2 Standby Mode
1. Press [Power] button to switch from TV/radio mode to standby mode
2. In standby mode press [Power] button again to switch back to TV/radio
mode. The last active channel will be showed.
3. To switch off the STB complete press the main power button.
7
Basic Operations
2.3 Mute
1. Press the [Mute] button to mute the sound. On the screen an icon will be
displayed to indicate the muted sound.
2. Press the [Mute] button again to restore the sound.
2.4 Audio
1. In TV mode, press the [Audio] button
to open the Audio Mode window.
2. Select the item you want to adjust with
[CH▲/▼] and change the value with
[VOL◄/►].
2.5 TV/STB
Switch TV output from STB to VCR Scart.
2.6 TV/Radio
In TV mode, press [TV/Radio] to switch to Radio mode. In Radio mode press
[TV/Radio] again to switch back to TV mode.
2.7 SLEEP
Press [SLEEP] button in TV mode to set the sleep timer. You will see “SLEEP
TIME OFF / SLEEP TIME 10 ~ SLEEP TIME 120”.
If you ser a sleep time, the system will change to standby mode after the
chosen time period.
2.8 SUB
In “Subtitle Display”menu. Subtitle: Press [VOL◄/] to select “standard” or
“Off”. Press [Vol◄/►] to select languages. If the current channel has subtitle
information, it will be displayed if this function isOn”. If this function is “Off
subtitles won’t be displayed.
8
Basic Operations
2.9 TXT
1. Press [TXT] button in TV mode to
open the teletext page. This service is
depending on the support of the
channel provider.
2. If the channel does not support
teletext information, it will show “No
Teletext Data” on the screen.
2.10 P/N
In TV mode, press [P/N] button to display Mode is used to switch the display
mode.
2.11 RECALL
Pressing the [Recall] button allows you to toggle between the actual and the
last selected channel.
2.12 Channel Number
In TV mode you can enter the channel number directly with your remote control
unit and confirm the number with the OK button to change to the desired
channel.
2.13 PGUP / PGDN
In TV mode, press [PGUP / PGDN] to switch directly between satellites.
2.14 SAT
1. In TV mode, press [SAT] button to
open channel list and select there,
then press [OK] to open “TV Channel
List” menu, select channel of the
current.
2. In TV mode, press [Page Up/Down] to
switch directly between satellites.
9
Basic Operations
2.15 FAV +/-
1. In full screen, press [FAV +/-] keys can switch the favorite channels in
current satellite channels list directly.
2. The sequence of the switch favorite channels is following the sequence
that in the current satellite channel list, not follow the sequence in the
favorite group.
2.16 EPG
The STB supports Electronic Program
Guides (EPG) to give you information
about the actual programs of certain
channels like event name, subtitle,
description, start and finish time. This
feature is depending on the service of the
channel provider.
Press [EPG] to open the EPG window.
1. You can move the highlighted channel
with [CH / ] and preview the
highlighted program in the preview
window. with [Vol/►] and display
the event’s detailed description.
2. Press the [INFO] button in the EPG
menu to display the detailed
information of the actual event in the
selected channel.
3. To close the EPG menu press [Exit /
Menu].
4. Press the [Red] button in the EPG
menu to program a timer with the
actual events data.
5. Press the [Green / Yellow] to select
date.
10
Basic Operations
2.17 FAV
1. In TV mode press the [FAV] button to
display the Favorite Group window on
the screen as the picture beside
shows.
2. In the Favorite Group window you can
select the desired favorite channel
with [CH▲/▼] and confirm it with [OK] to switch to it. In bigger groups you
can navigate with [PGUP/ PGDN].
3. With [VOL◄/►]. You can select
different Favorite Groups.
4. Press [Exit] to close the Favorite
Group window.
? Frequently Asked Question
Q: Why the screen displays “No
Favorite Channel after pressing
the [Favorite] button?
A: No channels have been assigned to a Favorite Group yet. You can do this
in the channel menu.
2.18 CH▲/
In TV/Radio mode press [CH▲/▼] to change channel.
2.19 V◄/►
In TV/Radio mode, press [Vol◄/►] to adjust volume.
2.20 OK
1. In TV mode press [OK] button to open the Channel List window.
2. Press the [Red] exchange screen.
3. Press [Green] button to sort the channels by free and scrambled channels.
Free channel are listed first and scrambled channels last
4. Press [Yellow] button to open the SAT list. After selecting a satellite the
channel list will be reduced to the channels of this satellite.
11
Basic Operations
5. Press [FAV] button to open FAV list.
After selecting a Favorite Group the
channel list will be reduced to the
channels of this group.
6. Press [Blue] button to open the Find
window. You can use this feature to
find channel by their names.
7. Press [OK] to change and display the
marked channel.
2.21 MENU
Press [Menu] button to enter or exit the current menu.
2.22 EXIT
Press [Exit] button to exit the current menu.
2.23 PAUSE
1. In playing mode, press [PAUSE], the picture will be paused, but the sound
of the channel will still continues.
2. Press [PAUSE] again, the screen’s picture will skip over to the current
playing picture, and the sound of the channel will corresponding playing.
2.24 ZOOM
1. The [Zoom] key allows you to magnify a certain area on the images and
the current screen will show
2. Press [Zoom] key again, the image
will enlarge rotate as x1, x2, x4, x6, x8,
x12, x16.
3. In “x2 ~ x16” image, using [CH▲/▼ /
VOL◄/►] keys to move the image
center area you want to see.
4. In zoom mode, press [Exit] to close
“Zoom” window.
12
Basic Operations
2.25 EDIT
In TV mode, press [EDIT] button to access
directly to the “TV Channel List” menu or to
the “Radio Channel List” menu.
2.26 INFO
In TV mode, press [INFO] button can open
information screen, in the window shows
the parameters of current channel.
Two dynamic bars at the bottom of the
window reflect the signal intensity and
signal quality of the current channel.
2.27 USB
In TV mode, press [USB] button to access directly to the “Media Management
menu.
2.28 MP3
In TV mode, press [MP3] button to access directly to the “Media List-MP3”
menu.
2.29 JPEG
In TV mode, press [JPEG] button to access directly to the “Media List-JPEG”
menu.
2.30 PVR LIST
In TV mode, press [PVR LIST] button to access directly to the “Record List”
menu.
13
Basic Operations
2.31 REC button
In recorded mode, during your watching,
press REC button to set up a starting point
2.32 T.S.
In TV mode, press [T.S.] button you will be
asked to “Start time shift?” menu.
2.33 GOTO
When you play the recorded channels, press [Goto] button, the “Jump to”
message box will pop up, input the Time and press [OK], then the receiver will
back to the input time point and play the program from that point continually. (If
the input time is more than the recorded time, the picture will back to last picture,
please noted.)
2.34
When you play a recorded program, press
[
] button will stop the recorded channel
playing and back to the Record
Management menu. When you are
recording a program, press [
] button you
will be asked to “Do you want to stop
record?” menu.
14
Basic Operations
2.35
In TV mode, press [
] button you will be
asked to “Do you want to record?” menu.
2.36 ◄◄/►►
When you play a recorded channel, press [◄◄] button to back the program
fast and Press [►►] to fast forward the program.
Selection: 2x, 4x, 8x speed .
2.37 II
When you play a current or recorded program, press [►II] will stop the program,
press [►II] again will play the program continually, And Timeshift is started by
this key.
2.38 I◄
Press [►I◄] button when you play a marked program, the screen will record to
the an mark point.
2.39 I◄◄/►►I
Press [I◄◄/►I] button when you play a marked program, the screen will
jump to the next mark point.
1. Jump Step Value: “1 Mins / 3 Mins / 5 Mins / 10 Mins / 15 Mins” jump.
2. Jump Step Value: Record the an mark point.
2.40 No Signal!
When No Signal, it will notify user on screen No Signal! Please check your
cables and connections for shorts. When the short is removed the warning
message will disappear.
15
Menu Operations
3. Channel Manager
Press [Menu] in the TV/radio mode to enter
the main menu.
1. Press [CH/] to select the channel
item.
2. Press [OK] to enter the selected item.
In the channel menu:
Press [CH/] to select the wanted menu
item among TV Channel List, Radio
Channel List, Channel setup, Favorite
group list name and Delete All.
Press [OK] to enter the selected item.
3.1 TV List
If you enter the channel list menu a window
like the one below will open.
1. You can move the highlighted channel
with [CH / ] and press [OK] to
preview the highlighted program in the
preview window.
2. Press [PGUP/PGDN] on the RCU to
jump between the channels by pages.
3. Press [Vol/►] to switch satellite of
the program group.
4. Press [Menu] or [Exit] buttons to enter TV playing mode.
5. The color buttons offer further functions to manage the channel list.
16
Menu Operations
3.1.1 Favorite
1. Press [FAV] to open the favorite
window.
2. You can select between 32 favorite
groups with [CH▲/▼]. Press [OK] to
assign the channel to a favorite group,
press [EXIT] to exit favorite group.
3. Press [OK] again to remove the
channel from the marked favorite
group.
4. Press [MENU] button you will be asked
“Are you sure to save?”. Select “Yes” to save the marked favorite group.
Select “No” to cancel the operation.
5. To return to the TV channel list. The channels of favorite groups are
indicated with a favorite icon behind the name.
3.1.2 Move
Pressing the [Red] button in the TV channel
list will open another window where you
can choose between move the actual
channel and swap the actual channel to the
desired position, press [OK] to confirm it.
a) Move
1. Press [Red] button to show a moving
icon behind the channel name.
2. Move the channel to the desired
position with [CH▲/▼]. Press [OK] to confirm the position.
b) Swap
1. Press [Green] button to show a moving icon behind the channel name.
2. Move the channel to the desired position with [CH▲/▼]. Press [OK], then
the selected channel will exchange the postions with the channel name on
this position immediately.
17
Menu Operations
3.1.3 Sort
Press [Green] to open the sort window.
Press [CH▲/▼] to select and [OK] to
confirm your choice.
The ways of sorting are:
Default: Sort channel factory default.
FTA/CAS: Sort channel by free and
scrambled sequence. Free channels
will be listed first and scrambled
channels behind in the channel list.
Lock: Unlocked channels are listed first end locked channels at the end.
Name(A-Z): Sorting in Alphabetical order, ignoring “$” symbol.
Name(Z-A): Sorting in Alphabetical order, ignoring “$” symbol.
3.1.4 Lock
After pressing the [Yellow] button a window
for entering the password will open. The
default password is “0000”.
You can delete, skip, lock and edit the
channel.
Press [MENU] to leave the channel editing.
The system will ask you to confirm the
saving of the changes you made.
3.1.4.1 Delete
In channel edit menu press [Red] button will open another window where you
can choose between delete one channel and delete all channel.
Del One
Press [Red] button to mark a channel for deleting. Marked channel will be
deleted after you confirm to save the changes when you leave this menu.
Del All
a) Press [Green] button to show a deleting icon behind all channel name.
b) Press [MENU] button you will be asked “Are you sure to save?”. Select
OK” to delete all channel. SelectCancel” to cancel the operation.
18
Menu Operations
3.1.4.2 Skip
In channel edit menu, press [Green] button to place a skip icon behind the name
of the highlighted channel. Marked channels will be skipped when you change
channels in TV mode after you confirm to save the changes when you leave this
menu.
3.1.4.3 Lock
In channel edit menu, press [Yellow] button to place a lock icon behind the name
of the highlighted channel. Marked channels will be locked and displayed only
after password has been entered if you confirm to save the changes when you
leave this menu.
3.1.4.4 Edit
Pressing the [Blue] button in the TV
channel list edit menu will open another
window where you can choose between
edit the actual channel and create a new
channel.
Edit
Press [Red] button to edit the channel.
1. Selecting the name item with [OK]
will display a button pad to show
you how to edit the channel
name.
2. On the “Video PID”, “Audio PID”
and “PCR PID” items you can
input numbers to modify the
item’s value.
3. After modification select “Save”
and press [OK] button to save the
modified values and exit “Edit
mode. Or select “Exit” and press [OK] to leave edit mode without
saving the modifications.
Create
Press [Green] button to open the create channel window.
19
Menu Operations
1. Press [OK] on theSatellite” item to
display the satellite list. You can select
the satellite for which you want to
create a new channel.
2. With marked “TP Index item press
[OK] to display TP list, use [CH▲/▼]
to select for which you want to create a
new channel. Press [OK] to display the
TP number where the channel can be
found. The next three items will show the related parameters.
3. Highlight the “Name” item and press [OK] to display the button pad and edit
the new channel’s name. In “Video PID”, “Audio PID” and “PCR PID” items
you can enter the numbers directly to set these parameters of the new
channel.
4. After modification select “Save” and press [OK] to save the new channel
and leave the edit mode. Select “Exit” and press [OK] to exit the edit mode
without saving the new channel.
3.1.5 Find
1. Press [Blue] button to open the “Find”
window like showed beside. Press
[CH▲/] / [Vol◄/] to select the
leading character of the channel name
and press [OK] to confirm it.
2. After entering the character(s)
highlight “OK” in the window and press
[OK] on the RCU.
3. Press [Exit] button to close the find
window and brings you back to the channel list.
3.2 Radio Channel List
Basically the operation of “Radio Channel List” is same as “TV Channel List”,
except that in the small channel window the radio Logo will be displayed.
20
Menu Operations
? Frequently Asked Question
Q: IF I incautiously delete all channels, what should I do?
A: there are two ways to restore:
To research all channels in the “Installation” menu.
Use “Factory Default function to restore all channels in the “Tools” menu.
21
Menu Operations
4. Installation
When you enter to “Installation” menu, there will display the screen like right:
In “Installation” menu;
1. Press [▼/▲] key to select menu
pages among Auto Scan, Channel
Scan, Channel Setup and Aerial
Adjustment.
2. Press [▼/▲] key to select menu items
among each items.
3. Press [OK] key to enter the selected
item.
4.1 Auto Scan
When you enter to “Auto Scan” menu, there will display the screen like right:
1. Firstly please select the country in
System Setup Menu / Region and
Time / Region
2. In “Scan Mode” item, press [◄/►] key
to select scans all channels or just
scans free channels.
3. Moving the highlight to “Search” item
and press [OK] key to start scanning.
4. In the “Auto Scan” menu, press [Exit] key to draw back from the scanning.
4.2 Manual Scan
When you enter to “Channel Scan” menu,
there will display the screen like right:
1. There is two mode. You can scan
channel by channel or by frequency”.
2. When scan band is UHF, the range of
Ch No. is from 21 to 69. When scan
band is VHF, the range of Ch No. is
from 5 to 13.
22
Menu Operations
3. When you complete your modification, move highlight to “Search” item and
press [OK] key, then it will begin to scan.
4. In the “Channel Scan” item, press [Exit] key to exit the scanning and save
the current parameters.
4.3 Factory Default
When you press [OK] on the “Factory Default” item:
1. A dialogue box will occur where you need to enter the password.
2. After you input the correct password a warning message will be displayed
like the one beside.
3. If you select “Yes” then all changes you made will be reset to default values.
Make sure you really want to do this!
4. Press [Exit] in both steps will close the window without resetting the
receiver.
5. Configuration
When you open the “System Setup” menu
a window like the one beside will be
opened.
In “System Setup” menu:
1. Press [CH▲/▼] to select menu items
among Language, TV System, Time &
Timer setting, OSD Setting, Parental
Lock and Power setting.
2. Press [OK] to open the selected item.
5.1 OSD Setting
After selecting the “Language” menu you
will see a window like beside:
1. Menu Language: Press [Vol◄/►] to
select languages. The selection of
23
Menu Operations
language include: English, German, French, Spanish, Italian, Portuguese,
Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi and
Dutch.
2. First Audio: Some channels offer more than one audio language. This
function allows you to set the preferred audio language for those channels.
If a channel offers the same audio language as the “First Audio” you set the
system will play this audio language as default. If the channel does not
offer this audio language then the system will compare the offered
languages with the second audio language. The selections of audio
language include: English, German, French, Spanish, Italian, Portuguese,
Turkish, Polish, Russian, Danish, Greek, Hungarian, Arabic, Farsi and
Dutch.
3. Second Audio: If the channel has no audio language that corresponds with
“First Audio” but with “Second Audio” the system will play the second audio
language as default. If no audio language corresponds with the “Second
Audio” then the default language of the current channel will be played
instead. The selections of audio language include: English, German,
French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish,
Greek, Hungarian, Arabic, Farsi and Dutch.
4. Subtitle Language: In “OSD Settingmenu, use [Vol/] to selectOn” or
“Off. If the current channel has subtitle information, it will be displayed if
this function is “On”. If this function is “Off” subtitles won’t be displayed. The
selections of subtitle language include: English, German,
French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish,
Greek, Hungarian, Arabic, Farsi and Dutch.
5. Teletext: Press [Text] button in TV mode to open the teletext page. This
service is depending on the support of the channel provider. If the channel
does not support teletext information, it will show “No Teletext Data” on the
screen. The selections of teletext language include: English, German,
French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish,
Greek, Hungarian, Arabic, Farsi and Dutch.
6. Press [Menu/Exit] to return back from “Language” menu.
5.2 OSD Setting
When you select “OSD Setting” you will see a screen like beside:
24
Menu Operations
1. Subtitle Display: Press [Vol◄/►] to select “Off”, Standard or Teletext
Subtitle”. If the current channel has subtitle information, it will be displayed
if this function isStandardor Teletext Subtitle. If this function is “Off”
subtitles won’t be displayed.
2. OSD Timeout: This setting determines the duration the info window is
displayed on the screen when you change channels. Press [Vol◄/►] to set
the time between 1 to 10 seconds.
3. Position: Press [Vol◄/►] select the position between top and bottom.
4. OSD Transparency: With this parameter you can set the transparency of
the menus. Press [Vol◄/►] select the value between 10%, 20%, 30%,
40% and “Off(means no transparency function).
5. Logo From USB: Press [Vol◄/►] to select Off” and On”. Set the image as
background.
6. Load OSD Setting Default: If you want to reset your OSD settings to the
default settings then select this item and press [OK].
7. Press [Exit] button to leave the “OSD Setting” menu.
5.3 TV System
When you enter the “TV System” menu you
will see the screen like below:
1. Display Mode is used to switch the
display mode. You can select from
PAL / NTSC. Press [Vol◄/] to switch
the desired mode.
2. Aspect Mode is used to switch the
screen aspect ratio mode. You can
select the needed mode from Auto /
4:3 PS / 4:3 LB / 16:9 with [Vol◄/►].
3. Video output is use for switching the screen aspect ratio mode. Now we
provide below options: SD / HD. You can press [Vol/►] key to select
each mode circularly.
4. Digital Audio Out is used to switch the output audio mode. You can select
the needed mode from LPCM Out / BS Out with [Vol◄/►].
5. Press [Menu/Exit] to return to the previous menu.
25
Menu Operations
1. Local Time Setting: When you select
Local Time Setting and press [OK]
then you will see a window like the
one beside:
GMT Usage: This item is used to
set the time by using the time
signal from the satellite. Press
[Vol/] to change the setting.
The “GMT Offset” item is only
available when “GMT Usage” is set to “On”. Press [Vol/►] to set the
“GMT Offset” value. With every time you press the button the time
offset will be increased/decreased by half an hour.
Summer: Press [Vol◄/►] to switch this function “On” or “Off”.
Date” and “Time items are only available when the “GMT Usage” is
set to “Off”. Press [Vol/►] to select one item and use number
buttons to input time and date directly.
Time Display: Press [Vol◄/►] to switch this function “On” or “Off”.
NOTE: If the current channel provides the correct time information,
you will see the current time after you entered “Local Time Setting
menu. If the channel doesn’t provide time information, you have to
input the date and time information manually. The most channels
support the time signal.
Press [Exit] to leave the “Time” menu.
2. Sleep Timer: SelectSleep Timer” item and press [OK] to set the sleep
timer. You will see “Sleep timer OFF / Sleep timer 10 / Sleep timer 30 /
Sleep timer 60 / Sleep timer 90 / Sleep timer 120”.
If you set a sleep time, the system will change to standby mode after the
chosen time period.
26
Menu Operations
5.4 Parental Lock
You can set a password for anyone who
wishes to operate the “Installation” menu.
You can also set the password to lock
channels. Below you find how to set and
change the password.
1. On “Parental Lock” press [OK] to open
a dialogue box and input the
password. After you entered the
correct password, you will see a
screen like beside:
27
Menu Operations
2. Menu Lock: If Menu Lock is set to “Yes” then you need to enter the
password every time you want to open the menu. If set to “No” then you
can open the menu without entering the password first.
3. Channel Lock: If set to “Yes” then you need to enter the password before
you can see those channels which have been marked as locked channels
in the channel menu. If set to “No” then even those channels can be
selected without entering the password first.
4. New Menu Password: Here you can change the existing password. You
should do this after you set up the receiver the first time and every time
when you think that your password is known by unauthorized persons. To
change the password enter the new password in the “New Menu
Password” item and repeat the same one in the “Confirm Password” item.
If the passwords are not identically then you will see a warning message. If
you entered the same new password in both fields then you will see the
message “Saving Data, Please Wait…”. From now on you need to use the
new password to open locked menus or locked channels.
NOTE: The default password is 0000.
5. Basically the operation of “New Chan(channel) Password” is same as “New
Menu Password”.
6. Press [Exit] to leave the “Parental Lock” menu.
5.5 Power setting
When you select this option, you will see a
screen like beside:
1. Automatic Standby: press [OK] to
open the “Automatic Standbymenu.
Automatic Standby: Press
[Vol◄/] to select “Off and
On”.
Time: Press [Vol◄/►] to select
1hr~ 8hr”.
28
Menu Operations
6. Utility
When you enter to “Tools” menu, you will
see a screen like beside:
In “Tools” menu:
1. Press [CH▲/▼] to select the wanted
item among Information, Quick Setup,
Factory Default, Software Upgrade,
SatcoDX Auto Programming and CAS.
2. Press [OK] to enter the selected item.
6.1 Information
1. When you select the “Information”
menu you will see a screen like beside.
The screen displays data about the
current channel.
2. Press [Exit] button to leave the
information display.
6.2 Software Upgrade
When you enter to “Software Upgrade”
menu, you will see a screen like beside:
1. Press [CH▲/▼] to select the wanted
item among USB-STB Upgrade,
STB-STB Upgrade and Backup To
USB.
2. Press [OK] to enter the selected item.
6.2.1 USB-STB Upgrade
This option allows updating the software of
the receiver with the received data from a
USB memory device. To do it, connect a
USB memory device to the receiver and
accede to this menu option.
The last software version to be loaded must
29
Menu Operations
be placed at the root path of your USB device.
1. Upgrade Mode: the mode of the upgrade to be choosed, Press [Vol◄/►] to
select Software, Whole, User Interface, Default DB, CAS and Ch.List &
Setting.
2. In theSoftwareitem press [Vol◄/►] to select the file which you want to
scan or press [OK] to open the “USB list” to select directly with [CH▲/▼],
and press [OK] to finish the selection.
3. Start: Press [OK] to start upgrade.
4. Once the file has been loaded, it requires the conformity to end the
upgrading process, writing into the receiver “Are you sure to burn flash ?”.
Press [OK] to upgrade the receiver. In case during the reading of the file, it
is corrupted or it would be a not appropriated for this model of receiver, an
alert message would appear “Error reading the USB disk”.
5. After pressing [OK] the receiver will write into the Flash memory, and it will
reboot to end the upgrading process.
NOTE:
The upgrade file is the binary file, *.bin. Only the files, which
extend name is bin, would be displayed. User need put the upgrade file
under root of USB card.
6.2.2 Backup To USB
This function allows you Dump Software
and Ch.List & Setting fo the receiver to
external hard drives.
1. press [Vol◄/►] to change the backup
mode. backup mode include: Dump
Software and Ch.List & Setting.
2. Mark “Start” on the master reeciver
and press [OK] to start Backup.
3. Press [MENU/EXIT] to save the
setting without Backup.
30
Menu Operations
7. PVR
When you enter to “PVR menu, you will
see a screen like beside:
In “PVR” menu:
1. Press [CH▲/▼] to select the Media
List, Media Control and Disk
Information.
2. Press [OK] to enter the selected item.
7.1 Timer
When you enter “Time & Timer Setting” a menu with this 3 items will be opened.
3. Timer: Select “Timer” item and press
[OK] to enter the “Timer” menu.
You can press [CH▲/▼] to select
item.
The current time will be displayed
in the first column. If the current
time is incorrect, please modify it
with the [Number] buttons.
Timer Number: You can press
[Vol◄/►] to switch the timer number. There are totally 16 timers.
Timer Mode: Select how often the timer is running: Once, Daily, Weekly,
Monthly and Yearly, or switch the timer to off.
Timer Service: Select between TV Channel, Radio Channel and
Message.
When you selectTV Channel / Radio Channel”(timer setting for
channel change and Wakeup channel / date) then you have further
options you need to set:
31
Menu Operations
Wakeup Channel: Press [OK] to enter the channel list, and select
the channel you want to see with [CH▲/▼], press [OK] to confirm
it.
Wakeup Date: Use number buttons to input your wakeup date.
On Time: Use number buttons to input your wakeup time. If date
and time are reached then no matter if the system is in standby
mode or in playing mode, it will automatically switch to the channel
you set and start to play.
Duration: Here you can set the time you want to see or play this
channel. When the time is reached, whenever the system is in
standby mode or playing a channel, the system will automatically
switch to the channel you select and play the channel within the
duration time you set. The minmum duration unit is one minute.
After the duration time, the system will automatically switch to
Standby mode.
When you select “Message”(reminding message) option in “Timer
Service” then you can enter additional data:
Wakeup Message: Press [Vol◄/►] to select the category
of the wakeup message from Birthday, Anniversary and General.
Wakeup Date: Use the [Number] buttons to input your wakeup
date.
On Time: Use the [Number] buttons to input your wakeup time. If
date and time are reached, no matter if the system is in standby
mode or in playing mode, it will automatically show a reminding
message. The message will be displayed on the screen until you
press [Exit] to close it.
Duration: Here you can set the time you want to see or play this
channel. When the time is reached, whenever the system is in
standby mode or playing a channel, the system will automatically
switch to the channel you select and play the channel within the
duration time you set. The minimum duration unit is one minute.
After the duration time, the system will automatically switch to
Standby mode.
Press [Exit] to leave the “Timer” menu.
32
Menu Operations
7.1 USB
Press [CH▲/▼] to select the wanted item
partition.
Press [Red] button to open the “Rename”
window like showed beside. Press
[CH▲/▼] / [Vol◄/►] to select the leading
character of the channel name and press
[OK] to confirm it.
If you enter the USB menu a window like
the one below will open.
1. Press [Vol◄/►] select the all, mp3,
image, video, music list, picture list,
video list, Record list.
2. You can move the highlighted Record
with [CH▲/▼] to preview the
highlighted program in the preview
window.
3. Press [PGUP/PGDN] on the RCU to jump between the channels by pages.
4. Press [Menu] or [Exit] buttons to enter TV playing mode.
5. The color buttons offer further functions to manage.
33
Menu Operations
7.1.1 All
[Edit]
Press [Red] button to open the “Edit
window like showed beside.
The color buttons offer further functions to
manage.
1. Rename
Press [Red] button to open the
“Rename” window like showed beside.
Press [CH▲/▼] / [Vol/►] to select
the leading character of the channel
name and press [OK] to confirm it.
After entering the character(s)
highlight “OK” in the window and
press [OK] on the RCU.
Press [Exit] button to close the find
window and brings you back to the Record list.
2. Delete
In all edit menu press [Green] button will
open another window where you can
choose between delete one and delete all.
Del One
Press [Red] button to mark a “mp3 /
image / videofor deleting. Marked
mp3 / image / video” will be deleted
after you confirm to save the changes
when you leave this menu.
Del All
a) Press [Green] button to show a deleting icon behind all “mp3 / image /
video” name.
34
Menu Operations
b) Press [MENU] button you will be
asked “Are you sure to save?”.
Select “OK” to delete all “mp3 /
image / video. Select “Cancel to
cancel the operation.
3. Move
Press [Yellow] button to show a
moving icon behind the “mp3 / image /
video / folder” name.
Move the “mp3 / image / video / folder” to the desired folder list with
[CH▲/▼]. Press [OK] to confirm the position.
4. Folder
Press [Blue] button to open the “New
Folder” window like showed beside.
Press [CH▲/▼] / [Vol◄/►] to select
the leading character of the folder
name and press [OK] to confirm it.
After entering the character(s)
highlight “OK” in the window and
press [OK] on the RCU.
Press [Exit] button to close the find
window and brings you back to the all list.
[Add]
In all menu press [Green] button will open
another window where you can choose
between add one and add all.
Add One
Press [Red] button to mark a “mp3 /
image / videofor add. Marked “mp3 /
image / video” will be add after you
confirm to save the changes when you
leave this menu.
35
Menu Operations
[Find]
Press [Blue] button to open the “Find” window like showed beside. Press
[CH▲/▼] / [Vol◄/►] to select the leading character of the channel name and
press [OK] to confirm it.
After entering the character(s) highlight “OK” in the window and press
[OK] on the
RCU.
Press [Exit] button to close the find window and brings you back to the all list.
[play]
The play offer further functions to manage.
If you enter the play menu a window like the
one below will open.
The color buttons offer further functions to
manage the channel list.
Red: When you play music program,
press [Red] will stop the program,
press [Red] again will play the
program continually.
Green: When you play music program, press [Green] button to back the
program fast.
Yellow: When you play music program, press [Yellow] button to fast forward
the program.
Blue: Change play mode by [Blue] Key, and play mode include: Sequential /
Random / Single repeat / all repeat.
Press [Exit] to return to the previous menu.
7.1.2 Music
Basically the operation ofmp3” is same as “all”.
7.1.3 Picture
Basically the operation of “Picture” is same
as “all, except that in the Yellow buttons
offer further functions to manage.
In image menu press [Yellow] button will
36
Menu Operations
open another window.
press [Red] to set the image as background.
press [Green] to delete the image as background.
7.1.4 Video
Basically the operation of “video” is same asall”.
7.1.5 Music List
The color buttons offer further functions to manage.
[Delete]
In media list menu press [Green] button will open another window where you
can choose between add one image and add all image.
Del One
Press [Red] button to mark a image
for add. Marked image will be add
after you confirm to save the changes
when you leave this menu.
Del All
a) Press [Green] button to show a
add icon behind all image name.
b) Press [MENU] button you will be
asked “Are you sure to save?”. Select “OK” to add all image. Select
“Cancel” to cancel the operation.
[Find]
Basically the operation of “Music List Find” is same asall Find ”.
7.1.6 Video list
Basically the operation of “Video List” is same as “Music List”.
7.1.7 Record Management
If you enter the Record list menu a window
like the one below will open.
The color buttons offer further functions to
manage the channel list.
37
Menu Operations
[Rename]
1. Press [Red] button to open the “Rename” window like showed beside.
Press [CH▲/▼] / [Vol◄/►] to select the leading character of the channel
name and press [OK] to confirm it.
2. After entering the character(s) highlight
“OKin the window and press [OK] on
the RCU.
3. Press [Exit] button to close the find
window and brings you back to the
Record list.
7.1.8 CAS
When you enter to “CAS” menu, you will see a screen like beside:
CI
In this menu option you will find information in referrence with the Conditional
Access. If there is not interface or it is not correctly introduced, it will appears in
the screen “CAM Not Available”. With the CI module correctly inserted, the card
data will appear. Please, follow the instructions which will appear in the screen.
CA
In this option, you can find information about the conditional access system. If
there is no card or it is placed incorrectly, information about “No card”
&“Unknown” will be showed on the screen. With a FELEC-CAS card,
information about the card will be showed.
Note: Card must be inserted with chip in upper side.
38
Menu Operations
[Lock]
In channel Record menu, press [Green]
button to place a lock icon behind the name
of the highlighted Record. Marked Records
will be locked and displayed only after
password has been entered if you confirm
to save the changes when you leave this
menu.
[Delete]
In channel Record menu, press [Red]
button will open another window where you
can choose between add one image and
add all image.
Del One
Press [Red] button to mark a image
for add. Marked image will be add
after you confirm to save the changes
when you leave this menu.
Del All
c) Press [Green] button to show a add icon behind all image name.
d) Press [MENU] button you will be asked “Are you sure to save?”. Select
“OK” to add all image. Select “Cancel to cancel the operation.
39
Menu Operations
7.2 PVR Options
1. Reserved TMS Size: Press [Vol◄/►]
to switch between “0 MB / 200 MB and
500 MB”.
Select “MENU / EXIT”, press [MENU /
EXIT] to reset to make tms size valid
now. Select “Cancel” press [OK] to
cancel the operation.
2. Jump Step Value: Press [Vol◄/►] to
switch between “1 mins / 3 Mins / 5
Mins / 10 Mins / 15 Mins”.
The value control the step of I◄◄/►►I operation.
3. Record Type: Press [Vol◄/►] to switch between “TS and PS”.
4. Disk: Press [Vol◄/] to switch between /C /D.....
5. Format Disk: If you want to delete the hard disk totally, you can do it with
the [OK] Button Format and the hard disk will be completely erased.
Caution: This process will delete also saves you have made with Backup
tools.
7.3 Disk Information
1. When you select the “Disk
Information” menu you will see a
screen like beside. The screen
displays data about the current HDD.
2. Press [Exit] button to leave the
information display.
40
Technical Specification
8. Technical Specification
VIDEO
Decoding MPEG-2 & MEPG-1 compatible
Bit rate Max 20Mbps
Output PAL/NTSC / Auto
Aspect ratio 4:3PS, 4:3LB, 16:9, Auto
Active pixel 720x480 @ 30fps; 720x576 @25fps
Output connector RCA, TV SACRT
AUDIO
Decoding MPEG-2/MPEG-1 layer I & II
Sampling rate 32 / 44,1 / 48
DEMODULATOR
Demodulation COFDM 2k, 8k
Guard 1/4, 1/8, 1/16, 1/32
Input data rate 5-31
INPUT SIGNAL
Frequency VHF-UHF
Input level -78dBm -20dBm
MISCELLANEOUS
Supply voltage 100~240VAC 50~60Hz
Power consumption 10 watts max
Operation temperature +5° to +40°
Storage temperature -20° to +70°
Dimension (W * D * H) 340*260*60MM
Weight 1.8 Kg
41
Technical Specification
MISCELLANEOUS
Supply voltage 100~240VAC~50~60Hz
Power consumption Max 20 watts
Operation temperature +5° to +40°
Storage temperature -20° to +70°
Dimension (W * D * H) 310*260*65 mm
Weight 1.8 Kg
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mvision HD450T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mvision HD450T in de taal/talen: Engels als bijlage per email.

De handleiding is 1,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info