677940
7
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
UPS Setting
01:
Output voltage
setting
02:
Programmable
outlets
enable/disable
03:
Programmable outlets
setting
04:
Maximum charger
current setting
05:
LCD display
direction setting
06:
Autonomy
limitation setting
07:
Battery total AH
setting
00:
Exit setting
200/208/220/230/240
110/115/120/127
(Default)
ENA/ DIS
0-999
1/2/4/6/8
RAC: Horizontal
TOE: Vertical
0-999/DIS
7-999
Steps for setting programmable outlet
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Before entering
setting mode, the UPS
should be in Stand-by
mode (off-charging)
and make sure the
battery is connected.
Press and hold the
“Selection” button for
3 seconds to enter
Setting mode
Press the “Up“ button (ON/MUTE) to switch to "02"
of program list. Then press “Enter“ button to enter
value setting of parameter 2. Press the “Up” button
to change the value to “ENA” to enable the
programmable outlet function. Then press “Enter”
button again to confirm the setting.
Press the Upbutton (ON/MUTE) again to
switch to "03" of program list. Then press
“Enter“ button for setting programmable outlet
time. Push “Up” button to change the value of
backup time according your demand. Then
press “Enter” to confirm the setting.
Press “Up“ button
(ON/MUTE) to switch
to "00" of program list.
Then press “Enter”
button to exit setting
menu.
Disconnect AC input
and wait until the LCD
display is off. The new
setting will be
activated when
turning on the UPS
again.
Operating Mode Description
ECO mode
Buck mode when AC is
normal.
Boost mode when AC is normal.
Battery mode
Standby mode
When the input voltage is within voltage
regulated range, UPS will power the output
directly from the mains. ECO is an abbreviation of
Efficiency Corrective Optimizer. In this mode,
when battery is fully charged, the fan will stop
working for energy saving.
When the input voltage is
higher than the voltage
regulation range but
lower than high loss
point, the buck AVR will
be activated.
When the input voltage is lower than the voltage
regulation range but higher than low loss point,
the boost AVR will be activated.
When the input voltage is lower than the
voltage regulation range but higher than low
loss point, the boost AVR will be activated.
When the input voltage is beyond the
acceptable range or power failure and alarm is
sounding every 10 seconds, UPS will backup
power from battery.
UPS is powered off
and no output supply
power, but still can
charge batteries.
MODEL
PM 1500 NetGuard LCD Line
PM 2000 NetGuard LCD Line
PM 3000 NetGuard LCD Line
CAPACITY
1500 VA / 1350 W
2000 VA / 1800 W
3000 VA / 2700 W
INPUT
Acceptable Voltage Range
81-145 VAC or 162-290 VAC
Frequency Range
60/50 Hz (auto sensing)
OUTPUT
Voltage Regulation (AC Mode)
110/115/120/127 VAC or 208/220/230/240 VAC
Voltage Regulation (Batt. Mode)
± 1.5%(before battery alarm)
Frequency Range (Batt. Mode)
50 Hz or 60 Hz ± 1 Hz
Current Crest Ratio
3:1
Harmonic Distortion
2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)
Transfer Time
Typical 2-6 ms, 10ms max.
Waveform (Batt. Mode)
Pure Sine Wave
BATTERY
Standard
Model
Battery Type & Number
12 V/7 Ahx4
12 V/9 Ahx4
12 V/9 Ahx6
Charging Voltage
54.8 VDC ± 1%
54.8 VDC ± 1%
82.1 VDC ± 1%
Recharge Time
4 hours recover to 90% capacity
Long-run
Model
Charging Current
N/A
1A/2A/4A/8A
1A/2A/4A/8A
Charging Voltage
54.8 VDC± 1%
82.1 VD ± 1%
PHYSICAL
Standard
Model
Dimension, DXWXH (mm)
510 x 438 x 88
630 x 438 x 88
Net Weight (kg)
19.5
21.5
29.3
Long-run
Model
Dimension, DXWXH (mm)
N/A
410 x 438 x 88
110/115/120/127 VAC: 510 x 438 x 88
208/220/230/240 VAC: 410 x 438 x 88
Net Weight (kg)
11
110/115/120/127 VAC: 13.9
208/220/230/240 VAC: 11.9
ENVIRONMENT
Operating Humidity
0-90 % RH @ 0- 40°C (non-condensing)
Noise Level
Less than 45dB
*Product specifications are subject to change without further notice.
Specifications
WARNING: This is a category C2 UPS product. In a residential
environment, this product may cause radio interference, in which
case the user many be required to take additional measures.
WARNUNG: Dies ist eine USV der Klasse C2. In Wohnansiedlungen
kann dieses Erzeugnis Funkstörungen hervorrufen, dann muss der
Benutzer zusätzliche Maßnahmen ergreifen.
User Manual
PM 1500/2000/3000 NetGuard LCD Line Interactive IEC version: 1. 0
EN
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mustek PowerMust 3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mustek PowerMust 3000 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Pools, Fins als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info