Terminate the playback
• Press the REL button to open the front panel, then press the button to eject disc,
and then remove the disc and close the front panel.
• Press and hold the PWR button on the front panel or briey press the PWR button
on the remote control to turn off the DVD player.
Playback CD with multiple media format
1. When you insert the CD with multiple medias, playback starts by MP3 les rst if it
includes MP3.
On the bottom of the menu, 3 sorting icons are displayed for MP3 on the left, JPEG at
the center and VIDEO on the right. Select the icon to display the kind of les that you
want to play.
If one kind of le does not exist on the disc, the cursor can not select the icon.
2. In the menu, press direction buttons to select folder, le or sorting icon. Press OK or
button to open the folder, play the le or play les of specic kind.
3. JPEG playback
When you select the sorting icon for JPEG, press or button to reach the rst
JPEG le, then press button to select the desired one. Finally, press OK or
button to display this le in full screen.
During JPEG playback, use the / / / buttons to change display angle as:
: 90 deg cw; : 90deg ccw; :UP<-->DOWN; : LEFT<-->RIGHT
* Press PROG button to change the refreshing mode of the picture.
* Press STOP button to stop playback and return to the menu.
* Following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, STEP,
AUDIO, RDM, INT and A-B.
* Other operations are same as MP3 mode.
4. Video playback
During playback, press the STOP button to stop playing and return to the menu.
In the menu, press direction buttons to select your desired folder or le. You can also
use number buttons to select and play the le.
* The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.
* The other functions are same as DVD disc; but RPT function is same as MP3.
1. Press the SETUP button on the remote control to access the DVD System Menu on
the monitor.
2. There are 6 setup pages in all for the System Menu. Press the or button to
select a setup page.
3. Press the or button to select a setup item.
4. Press the button to enter the setup item. Then press the or button to
select a setting, press the OK button to conrm .
* Press the button to return to the upper level.
* Press the SETUP button again to exit the System Menu.
SYSTEM SETUP
GB - 19 GB - 20
GB - 21 GB - 22 GB - 23
Select chapter/track with the number buttons
When playing DVD/VCD(PBC OFF)/MP3/CD discs, press one of the 1~9 and the
0/10 number buttons to directly select and play the 1st to 10th track / chapter (the
0/10 button is used as the 10 button). If you want to play the track/chapter with serial
number bigger than 10, use the 10+, 1~9 and 0/10 button.
For example 1, to play the 13th track/chapter, rstly press the 10+ button once, then
press the 3 button.
For example 2, to play the 34th track/chapter, rstly press the 10+ button for 3 times,
then press the 4 button.(the 0/10 button is used as the 0 button)
Note: pressing and holding the +10 or -10 buttons will allow you to play the next 10 or
last 10 chapter/track (only for MP3).
Select chapter/track with theTitle/PBC menu (If included on the disc)
When playing DVD discs:
1. Press the TITLE button on the remote control to display the title list.
2. Press the direction buttons to select your desired title, and then press the OK or
button to open the menu of the selected title.
3. Press the direction buttons to select your desired chapter, nally press the OK or
button to play the selected chapter.
During playback, pressing the MENU button can directly display the menu of the title
that is playing.
In VCD mode:
Press PBC button to turn on/off the PBC function (Play Back Control)
1. When PBC is activated, the PBC menu is displayed if existing on the disc.
2. Press the number buttons to select your desired track to play.
In MP3 mode
1. The root menu is displayed on the monitor screen all the time(and the TITLE or
MENU button is not available).
2. Press the direction buttons to select your desired FOLDER, then press the OK button
to open the FOLDER, and then press the direction buttons to select your desired le,
nally press the OK button to play the selected le.
In CD mode, the TITLE, PBC, MENU buttons are disabled.
• Fast speed
During playback, press and hold ▲/▼ buttons on the front panel or / on the
remote repeatedly to increase speed forward/backward at following speed: 2x, 4x, 8x,
20x, normal...
During fast playback, press button to resume normal playback.
• Slow motion
During playback, each consecutive press on SLOW_FWD button, the speed
decreases as follows: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, normal…
- During slow motion, press button to resume normal playback.
- This function is only for video.
Display still frame step by step
If the unit is currently playing video, press the STEP button repeatedly to display still
frame step by step.
Press the button to resume normal playback.
Playback repeatedly
1. In the mode of DVD disc playback, press the RPT button to select REP CHAPTER,
REP TITLE, REP ALL or REP OFF.
2. In the mode of VCD(PBC OFF)/CD disc playback: press the RPT button to select
REP ONE, REP ALL or OFF.
When PBC is ON, during VCD playback, the RPT button is not available.
3. In the mode of MP3 disc playback: Press the RPT button to select REP ONE, REP
DIR, REPALL or OFF.
A-B repeat
Press the A-B button if you want to repeat a specic segment on a disc
that you dene:
1. Press A-B button at the beginning of the segment in which you want to repeat
playback (point A).
2. Press A-B button again at the end of the segment (point B).
The player will automatically return to point A and start to repeat playback of the
selected segment (A-B).
3. Press A-B button to cancel the A-B repeat function.
Note:
During VCD/MP3/ CD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.
Playback in scan mode
1. When playing VCD(PBC OFF)/CD discs, press the INT button to play the rst 15
seconds part of each track on the disc. Press the INT button again to resume normal
playback.
2. When playing DVD/MP3 discs, the INT button is not available.
Playback from a specied chapter/track or a specied time
1) When playing DVD discs, press the SEARCH button. In the menu, select the title,
chapter or time with the direction buttons and input a number with numeric buttons.
Press OK or buttons to start playback from the title, chapter or time that you have
selected.
2) When playing VCD/MP3/CD discs, proceed as above to start playback from the
track or time that you want.
Playback in random
When playing DVD/VCD(PBC OFF)/MP3/CD discs, press the RDM button to switch
between RANDOM(ON)/RANDOM
(
OFF). When in RANDOM (ON) mode, it will play in
random.
Playback in different angle
1. When playing VCD/MP3/CD discs, the button on the remote control is not
available.
2. When playing DVD discs, press the ANGLE button repeatedly on the remote control
to view in different angle.(This function is only for the DVD discs with ANGLE function)
Zoom mode
In DVD/VCD mode, during playback, press the ZOOM button continuously to enlarge
a certain area of the picture. Zoom ratio: ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/
2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press the / / / buttons to select the
area you want to enlarge.
Change the caption language
When playing DVD discs, press the SUBTITLE button repeatedly to select the
language of the caption or turn off the caption(depend on the disc.)
When playing VCD/MP3/CD discs, the button is not available.
Change the audio language
1. When playing DVD discs, press the AUDIO button repeatedly on the remote control
to select the desired language type(depend on the disc)
2. When playing VCD discs, press the AUDIO button repeatedly to select the sound
mode: MONO L, MONO R, MIX MONO and Stereo.
3. When playing CD/MP3 discs, the AUDIO button is invalid.
Change the video signal system
During playback of DVD/VCD disc, press the BAND button on the front panel or P/N
on the remote control repeatedly to change the VIDEO SIGNAL SYSTEM mode as
follows:
--> PAL--> PAL-M --> PAL-N --> AUTO --> NTSC -->
Playback status
When playing discs, press the OSD button repeatedly on the remote control to turn
on/off the playback status.
1. DVD discs: the number of the playing title, the number of the playing chapter, the
elapsed time of the playing chapter, the remaining time of the playing chapter, the
elapsed time of the playing title, the remaining time of the playing title, etc.
2. VCD/CD discs: the number of the playing track, the elapsed time of the playing
track, the remaining time of the playing track, the elapsted time of the disc, the
remaining time of the disc.
3. MP3 discs: the number of the playing track, the elapsed time of the playing track,
the remaining time of the playing track.
Program playback
It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/
MP3/CD disc to play.
1 During playback, press the PROG button to enter a program interface as follows:
for DVD discs for VCD/MP3/CD discs
2 Use the direction buttons to move cursor onto the desired place for inputting the
sequence number.
3 Use the number button to input desired sequence number of title/chapter/ track with
desired sequence.
4 Use the direction button to move cursor onto play item, then press the OK button to
play the programmed titles/chapters/tracks in programmed order; only pressing the
PLAY button also can play the programmed titles/chapters /tracks in programmed
order.
* To exit program playback, rstly press the STOP button twice, then press the PLAY
button to enter sequence playback; or press the PROG button twice again.
* To remove all programmed sequence numbers, move the cursor onto Clear item,
then press OK button.
* To change the programmed sequence, move the cursor onto the item you want to
change, input the desired sequence number.
* During VCD playback, if it is in PBC ON mode, when entering the program playback,
will turns off PBC mode.
USB and SD operation
Power on the DVD player, insert the USB device, or ip down the front panel to insert
MMC/SD Card. Close the front panel then the monitor will display the menu of the
USB or MMC/SD Card.
All the operations are same as ones of the corresponding format as described above.
TV SYSTEM
This product supports various DVD video systems.
The screen will blink and become colorless when a wrong system is selected. In this
case, press the P/N button to switch the right system: NTSC/PAL/PAL-M/PAL-N/
AUTO system.
TV TYPE
Select 4:3 PS, 4:3 LB or 16:9 according to the DVD contents or the format, 4:3 or
16:19, if you have connected external monitor to the video output.
DEFAULT
This item is for making all setup items change back to original status.
OSD LANGUAGE
This item is for selecting the language of the SYSTEM MENU and all operating
information displayed during playback.
AUDIO LANG
This item is for selecting a audio language.
SUBTITLE LANG
This item is for selecting a subtitle language.
MENU LANG
This item is for selecting a disc menu language.
AUDIO OUT
There is only ANALOG mode, i.e. SPDIF/OFF, not optional.
KEY
It is for selecting your desired basic music tone(from low to high).
VIDEO SETUP
BRIGHTNESS
It is for adjusting the brightness of the video output.
DOWNMIX
For selecting your desired sound effect when there is no center speaker and
subwoofer. There are 3 modes: LT/RT, STEREO, VSS.
LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, so it will output
audio signal with vivid theatre effect.
STEREO:with 5.1 audio signal, it will output the left and right channels signal; with 2
channels, it will output the common 2 channels signal of stereo signal.
VSS: when playing a disc with 5.1 channels, the main channel speakers can output
audio signal with VSS effect.
OP MODE
It is for selecting audio output mode
DYNAMIC RANGE
Select a value between FULL (maximum compression) and OFF ‘(maximum dynamic)
DUAL MONO
It is for selecting a desired audio output mode for the left and right channels. There
are 4 modes as follows:
STEREO, MONO L, MONO R, MIX MONO.
14.4V DC(11-16V allowable)
4
40Wx4
±7dB
Bass 100Hz
Treble 10kHz
Approx.184x178x100mm(d/w/h)
Approx.164x183x112mm(d/w/h)
Approx.3.5kg
87.5-108(MHz)
10.7MHz
12dBuV
50dB
30dB (1kHz)
40-12000Hz
522-1620(kHz)
450kHz
35dBuV
AUTO/PAL/NTSC
2 channels
40Hz to 16,000Hz
60dB
50dB
SPECIFICATION
General
Power Requirement
Load Impedance
Max. Power Output
Tone Controls
Dimensions
Mounting Dimension
Weight
FM Tuner Section
Tuning Range
IF Range
Usable Sensitivity (-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
MW Tuner Section
Frequency Range
IF Range
Usable Sensitivity (-20dB)
DVD Player Section
DVD Video Signal System
Number of channel
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
GB - 14 GB - 15 GB - 16 GB - 17
GB - 18
GB - 24 GB - 25 GB - 26 GB - 27
DIGITAL SETUP
SPEAKER SETUP
AUDIO SETUP
RATING (Parental Control)
The item is for setting a new rating level of the Parental Control.
1. Select the PASS WORD item and then press the button to enter it, then input the
pass word mentioned above, and then press the OK button to unlock the setting of the
rating level of the Parental Control.
2. Select the RATING item and then press the button to enter it, then use the
direction buttons to select your desired rating level, then press the OK button to
conrm.
Rating levels of Parental Control are as follows:
1 Kid Safe
2 G
3 PG
4 PG 13
5 PG-R
6 R
7 NC-17
8 Adult
3. Select the PASS WORD item again and then press the button to enter it, then
input the pass word, and then press the OK button to lock the new setting of the rating
level of the Parental Control.
CONTRAST
It is for adjusting the contrast of the video output.
HUE
It is for adjusting the hue of the video output.
SATURATION
It is for adjusting the saturation of the video output
SHARPNESS
It is for adjusting the sharpness of the video output.
Note
If the rating level set in the disc is higher than one set in the DVD player, the playback
will be blocked and password menu is displayed. To release playback, enter the
correct password. The rating level setup is protected by the password. Therein, if you
select Unlock item, the Parental Control function will be invalid, the content of disc will
be played totally.
DVD SETUP OPERATION
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before
calling a service center.
EJECT DISC AND SWITCH OFF
ADVANCED DISC, USB OR MMC/SD OPERATIONS
