8
Sonic Liner
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely
hope that you are happy with the contents of your kit. However, we would ask you to check all the parts before you
start construction, as we cannot exchange components which you have already worked on. If you find any
part is not acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model
Department. Please be sure to include a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the
kit contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification.
Please understand that we cannot entertain claims against us if the kit contents do not agree in every respect with
the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and
operating them safely requires a certain level of technical competence and manual skill, together with
discipline and a responsible attitude at the flying field. Errors and carelessness in building and flying the
model can result in serious personal injury and damage to property. Since we, as manufacturers, have
no control over the construction, maintenance and operation of our products, we are obliged to take this
opportunity to point out these hazards, and to emphasise your personal responsibility.
Additional items required:
Radio control equipment: Function
MULTIPLEX Micro IPD UNI receiver 35 MHz Order No. 5 5971
40 MHz Order No. 5 5972
Tiny S UNI servo (3 x required) Ele. / 2 x Aileron Order No. 6 5121
PICO-Control 400 DUO UNI Speed controller Order No. 7 5024
Extension lead with separation filter (2 x required) Order No. 8 5035
Flight battery:
MULTIPLEX Permabatt 7/3000 mAh flight battery Order No. 15 6026
MULTIPLEX Permabatt 8/3000 mAh flight battery Order No. 15 6027
Battery charger:
MULTIcharger 4010 DC Order No. 9 2527
Adhesive:
MULTIPLEX “Zacki, medium viscosity” Order No. 59 2720
MULTIPLEX “Zacki Activator” Order No. 59 2824
Alternatively you can use any comparable cyano-acrylate adhesive (“medium cyano”). Don‘t use special styrofoam
cyano. Epoxy glues appear to produce strong joints, but the strength is only superficial and the hard adhesive
tends to break away from the components under stress.
Tools:
Scissors, balsa knife, screwdrivers (2 + 5 mm), 4-5 mm Ø bradawl or small round file
Specification:
Wingspan 1265 mm
Fuselage length 1300 mm
All-up weight standard - 400 motors / 8 cells approx. 1550 g
All-up weight 480 motors / 8-9 cells approx. 1650 g
Wing area approx. 42 dm²
Wing loading min. approx. 37 g/dm²
RC functions Aileron, elevator and throttle
Separate the illustrated pages from the centre of this booklet.
