30266
35
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
ROYAL evo
Page 90
™-
„Symmetrical with dead zone“
Neutral position of control: Centre
two parameters: Dead zone and travel
100%
-100%
-100%
100%
Control
travel
Servo travel
TrvTrv
DeadDead
The option single sided/linear with offset is the only one
where the servo movement starts from the point de-
fined by the OFFSET parameter and not from the centre.
›+
„Single-sided, linear with offset“
Neutral position of control: End-point
two parameters: Offset and travel
100%
-100%
-100%
100%
Servo travel
Control
travel
OffsOffs
TrvTrv
Offs = 0%
Offs = -50%
13.3. Sub-menu “Assignment”
The ROYALevo enables the user to assign the various
physical elements present (sticks, sliders, switches, but-
tons) as transmitter controls or switches (function swit-
ches)..
What are transmitter controls?
Transmitter controls are all those elements on your
transmitter which you can use to control a servo (speed
controller, etc.) on the model directly. In chapter 13.3.4.
you find a list of all possible controls for the ROYALevo.
What are switches?
What we term switches are physical controls which are
not used to control primary functions on the model.
They are used, for example, to switch mixer functions
(e.g. Combi-Switch), Dual Rates, timers and flight phases
on and off. In chapter 13.3.5. you find a list of all possi-
ble switches.
' TIP:
For modellers familiar with the MULTIPLEX PROFI mc
3000 and 4000:
All the control elements of the ROYALevo are perma-
nently installed. The ROYALevo does not differentiate
“electrically” between transmitter controls and switches;
this means that any control element can be used as a
transmitter control and/or as a switch. It is no longer
necessary to assign what are known as “transmitter
control switches” or “Gx switches”. For example, if you
wish to time the motor run, simply assign the throttle
transmitter control as the timer switch.
All the control elements of the ROYALevo are perma-
nently installed. The ROYALevo does not differentiate
“electrically” between transmitter controls and switches;
this means that any control element can be used as a
transmitter control and/or as a switch. It is no longer
necessary to assign what are known as “transmitter
control switches” or “Gx switches”. For example, if you
wish to time the motor run, simply assign the throttle
transmitter control as the timer switch.
! Note: Predefined assignment lists
3 of the 5 assignment lists contain default assignment
data. This can be changed at any time to suit your own
requirements. However, please note that we cannot
guarantee that the template will work 100% correctly if
you change the standard mixers and subsequently cre-
ate a new model using a model template (è12.1.)
which includes the assigned “standard mixers”.
The offset moves the
end-pont of the servo
travel. Total travel of the
servo is Offs+Trv
Application sample:
Input Spoiler in the
mixer FLAP+ for large
travel down-wards with
butterfly (crow).
The control generates a
symmetrical movement
of the servo starting at a
point remote from the
control centre (dead
zone), with variable but
identical travel in both
directions.
Attention: Do not use
for AILERON inputs!
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex ROYALevo12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex ROYALevo12 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Multiplex ROYALevo12

Multiplex ROYALevo12 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info