USEFUL ADVICE
CLEANING AND MAINTENANCE
• Wash the fruits carefully before stoning.
• You do not need to remove the skin or peel. You
only need to peel fruits with thick (and bitter)
skin: citrus fruits, pineapple (remove the stalk).
• Certain types of apples, pears, tomatoes, etc.
will fit in the feed tube whole, thanks to the
“Direct Fruit System” (74.5 mm maximum
diameter), so choose the appropriate size of
fruits or vegetables.
• It is difficult to extract juice from bananas,
avocados, blackberries, figs, aubergines and
strawberries.
• The appliance should not be used for sugar
cane and excessively hard or fibrous fruits.
• Choose fresh, ripe fruits and vegetables, they will
yield more juice. This appliance is suitable for
such fruits as apples, pears, oranges, grapes,
pomegranates and pineapple; for vegetables
such as carrots, cucumbers, tomatoes, beetroot
and celery.
• If you juice over-ripe fruit, the sieve will be
blocked more quickly.
• Important: All juice must be consumed
immediately. On contact with air, the juice
quickly oxidises which can change the taste,
colour and the nutritional value. Apple and
pear juices quickly turn brown.
Add a few drops of lemon juice to slow this
discoloration.
• All removable parts (A, C, D, G, L, M & N) can
be cleaned in the dishwasher except for the
juice collector (E). The juice collector (E) must
be cleaned straight after use in soapy water.
• This appliance is easier to clean immediately
after use.
• Do not use scouring pads, acetone, alcohol
(spirit) etc. to clean the appliance.
• The sieve must be handled with care. Avoid any
mishandling that may damage it as it will alter
the performance. The sieve can be cleaned
with the aid of the brush (O). Change your sieve
at the first sign of wear or damage.
• Wipe the motor unit down with a damp cloth.
Dry carefully.
• Never plunge the motor unit under running
water.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
PROBLEM CAUSES SOLUTIONS
The appliance does not work.
The plug is not inserted correctly,
the control switch (I) is not on
speed “1” or “2”.
Plug the appliance into a socket with
the correct voltage. Turn the control
switch to speed “1” or “2”.
The cover (C) is not properly
secured.
Check that the cover (C) is properly
fitted and secured by the safety
clamp (H).
The appliance is giving off a
smell or is very hot to touch, is
making an abnormal noise or
smoking.
The sieve (D) is not properly fitted.
Check that the sieve (D) has been
fitted properly onto the drive shaft (J).
The quantity of food being
processed is too great.
Leave the appliance to cool down
and reduce the quantity of food to
be processed.
Juice flow decreases. The sieve (D) is blocked.
Switch off the appliance, clean the
feed tube (B) and the sieve (D).
For any other problem or abnormality, please contact your nearest Approved Service Centre
RECYCLING
Environnement protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point so that it can be recycled.
