DESCRIPTION
USING FOR THE FIRST TIME
Motor unit
a
Motor unit
b
Power and storage
C
hopping unit
c
Lid
d
Seal cover
e
Chopping blade
f
Chopper bowl
B
lender unit
(depending on model)
g
Measuring cap
h
Lid
i
Blender jug
j
Starting button (Pulse)
k
Pestle
S
pice/coffee grinder unit
(depending on model)
l
Lid
m
Bowl with stainless steel tub
•
B
efore using your appliance for the
first time, remove the plastic
protection from the chopping blade
(e) which is very sharp and wash all
the accessory parts in warm soapy
water. Rinse and dry.
• Use the motor unit
(
a)
on a work
surface that is flat, clean and dry.
• Do not plug in your Chopping Unit until
all of the accessories have been
assembled.
T
he numbers for each paragraph
match the numbers of the diagrams.
1 - CHOPPING FUNCTION
• Place the chopper bowl
(
f)
on the
motor unit
(
a)
.
• Remove the plastic protection around
the knife blades (e), then place them
inside the chopper bowl (f) making
sure to secure them safely
(
Fig. 1.a)
.
H
andle the blade extremely carefully.
It is very sharp.
• Then place the food, cut into 2-cm
pieces, in the chopper bowl
(
f) (Fig.
1.b)
.
• To avoid any spillages (semi-liquid
mixtures, foods to be reduced to
powder, etc), place the seal cover
(
d)
over the chopper bowl
(
f) (Fig. 1.c)
.
When making semi-liquid mixtures, fill
your chopper bowl only half full.
• Place the lid
(
c)
on the chopper bowl
(
f)
and turn it slightly to the left to lock it
(
Fig. 1.d)
.
• Now you can plug in your Chopper Unit
to the mains.
• For your safety, your device is equipped
with an anti-overheating system. If the
appliance is used in excess of its
capacity (with too many ingredients of
for too long a time) it will stop
automatically. Unplug the appliance
• Always use the blender
(
i)
with its lid
on
(
h)
.
• Never touch moving parts, wait for the
blender to stop completely before re-
moving the accessories.
• Do not use the accessories as a
container (freezing – cooking – heat
sterilisation).
• Do not place the accessories in a
microwave oven.
• Do not allow long hair, scarves, ties,
etc. to dangle over the blender while
it is working.
8
