TROUBLES & TREATMENTS
Trouble Possible Reasons
Treatment
Cannot lock the lid
• The sealing gasket is not
installed properly
• The float is seized by the
push rod
• Reinstall the sealing gasket
• Push the push rod with
hands
Cannot open the lid after
air exhaust
• The float is still up
• Press the float down with
chopsticks
Air escape from the rim of
the lid
• No sealing gasket
• Food stick on sealing
gasket
• sealing gasket wear out
• Lid not locked properly
• Install the sealing gasket
(ref: XA500033)
•
Clean up the sealing gasket
•
Replace the sealing gasket
• Lock the lid again
Air escape from the float
valve
• Food stick on the sealing
gasket of the float valve
• The sealing gasket on the
float wear out
• Clean up the sealing
gasket
• Replace the sealing
gasket
• Change the sealing
gasket every two years
The float cannot rise up
• The pressure limit valve is
not placed properly
• Not enough food and
water
• Air escape from the rim of
the lid and the pressure
limit valve
• Place the device to .
• Put enough food and
water in the inner pot
• Sent the product to our
service center for repair
• Must not take the appliance apart or
replace any components.
• Do not replace the power cord with other
cords.
• Keep out of the reach of children.
• Do not use the cooking pot on other
stovetops nor in other appliances.
• If pressure is releasing continuously during
more than 1 minute while pressure
cooking, send the appliance to our service
center to repair it.
