9
Attaching the flexible hose to the
vacuum cleaner.
Push the flexible hose (19) in the
opening (1) until your hear a clicking
sound.
To remove the flexible hose from the
vacuum cleaner, press the button
situated on the nozzle and pull.
Assembling the tubes.
Assemble the 2 tubes (20) by turning
slightly.
If your appliance is equipped with a
metal telescopic tube (21): push the
slide switch down, and adjust to the
required length, release the slide
switch to lock in place.
Fitting the accessories.
Fit the accessory at the end of the
tube.
For rugs and wall-to-wall carpeting:
use the head (22) with brushes lifted.
For floors and floor-boards: use the
head (22) in the lowered position,
or directly use the floor noozle.
To vacuum next to skirting boards and
awkward corners : use the dual
accessory tool (23) in the crevice
nozzle position.
For furniture: use the dusting brush of
the dual accessory tool (23) or the
furniture nozzle (24).
Installing the carrying strap
(depending on model*).
Your appliance is equipped with a
strap (27) that allows you to carry it
on your shoulder.
To attach the strap clip the hooks in
the slots.
Plugging in the electrical power
cord and using the vacuum
cleaner.
Completely unwind the power cord,
plug in your vacuum cleaner and push
the on/off pedal (11).
Adjusting the suction power.
With the electronic power selector (3)
(depending on model*)
Push the power selector or to select
the vacuuming power: position maxi
for floors and position mini for
furniture and delicate materials.
With the variable power selector
(depending on model*)
Using the appliance
Open the selector switch flap to
manually reduce suction power
regulator, ex: fragile surfaces…
Storage.
After use, stop your appliance by
pressing on the on/off pedal (11) and
unplug it.
Replace the cable by pressing the
automatic cable rewind pedal.
Place the tubes in their storage
position (16). Place the dual accessory
tool (23) in its storage area (18).
In vertical position, place the tubes in
their storage position under the
appliance (14).
Important!
Always stop and unplug your
appliance before maintenance or
cleaning.
Changing the bag.
The bag full indicator (12) indicates
(depending on model*) that the bag is
full or saturated.
If you notice that your vacuum cleaner
is less efficient, select the maximum
power and by lifting the floor head off
the floor, if the indicator stays on,
change the bag.
Lift the cover by its handle (7).
To throw away the bag, place the
cleaner above a rubbish bin and press
on the automatic eject button (6).
Place the bottom of a new dustbag
cardboard in the bag clip then push
on the top of the cardboard (8).
Warning!
Check that the bag is in place
before closing the cover.
Replace the cover by letting the bag
holder slide along the retaining slides
(2) then press firmly on the handle (7)
to close the cover.
NB. Never try to carry the vacuum
cleaner (7) by the cover handle,
always use the carrying handle (15).
Cleaning the motor foam protection.
Warning!
The motor foam protection must
always be in place when in use.
Remove the cover (5), the grid (9)
then remove the foam (10). Shake it
Maintenance and cleaning
A1
G
G1
H1
H2
H3
H4
B1
C1
C2
C3
C5
D
E
F1
F2
B2
A2
I1
G2
G3
C4
ROWEN 68 - Boogy réf. 100386 11/04/03 8:56 Page c11
