609887
16
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
USER’S GUIDE
MBP43, MBP43/2, MBP43/3, MBP43/4
BABY MONITOR
USER’S GUIDE
The features described in user's guide are subject to
modifications without prior notice.
This User's Guide provides you with all the information you need
to get the most from your product.
Before you can use the baby monitor, we recommend you insert
and fully charge the battery in the parent unit, so that it continues
to work if you disconnect it from the power supply to carry it to
another location. Please read the Safety Instructions on page 6
before you install the units.
Got everything?
• Parent unit
• Camera unit(s)
Rechargeable Ni-MH battery pack
Power adapter for the Parent unit
Power adapter(s) for the Camera unit
In multi-camera packs, you will find one or more additional
camera units with power adapter units.
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP43, MBP43/2, MBP43/3, MBP43/4.
Now you can see and hear your baby sleeping in another room or.
you can monitor your older children in their playroom.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide
a copy of your dated sales receipt to confirm warranty status.
Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
On the Web: www.motorola.com
1. Display (LCD screen)
2. Up Key
+
Normal Mode: Tilt Up
Menu Mode: Up
3. Down Key
-
Normal Mode: Tilt Down
Menu Mode: Down
4. Left Key
<
Normal Mode: Pan Left
Menu Mode: Left
5. Right Key
>
Normal Mode: Pan Right
Menu Mode: Right
6. Menu Key
M
Press to open the Menu options
7. OK Key O
8. Video ON/OFF Key
V
Press again to turn ON the
LCD display
9. Talk Key
T
Press and hold to speak to
your baby
10. Power LED
BLUE when mains adapter
power on.
RED when battery low.
11. Unit ON/OFF LED (Green)
12. Audio Level LED (Green,
Orange, Red, Red)
13. Microphone
14. Power Key
P
Press and Hold to turn the unit
ON/OFF
15. Antenna
Lift the antenna for optimal
reception
16. Battery cover
17. Stand
18. Speaker
19.
Power Adapter Socket
Overview of the Parent Unit
18
15
16
17
Parent unit menu icons
1
Signal Level (5 Levels)
N
Night Vision Mode (Screen changes to Black/White)
T
Talk M o de
Battery Level Control (4 Levels)
H
Pan Left
J
Pan Right
K
Tilt Up
L
Tilt Down
B
1
11
13
6
7
8
9
2
3
4
5
10 12
14
19
indicator
Scroll
Scroll
turn OFF the LCD display
In monitor mode, press to
1. Photo Sensor (Night Vision
Mode)
2. Camera Lens
3. Infared LEDs
4. Power LED
5. Microphone
6. Speaker
7. ON/OFF Switch
8. Power Adapter Socket
9. Antenna
10. Pair Key
Important guidelines for installing your Baby Monitor
To use your Video Monitor Baby and Parent Unit together, you must
be able to establish a radio link between them, and the range will be
affected by environmental conditions.
Any large metal object, like a refrigerator, a mirror, a filing cabinet,
metallic doors or reinforced concrete between the Baby and Parent
Unit may block the radio signal.
The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
Use of other 2.4GHz products, such as wireless networks (Wi-Fi
®
routers), Bluetooth
®
systems, or microwave ovens, may cause
interference with this product, so keep the baby monitor away at least
5ft (1.5m) from these types of products, or turn them off if they appear
If the signal is weak, try moving the Parent and/or the Baby Unit to
different positions in the rooms.
Parent unit menu icons (cont’d)
Overview of Your Baby Unit
*
Volume Level Control (8 Levels)
&
Brightness Level Control (8 Levels)
m
Lullaby Control (5 Song Selections)
Z
Zoom Level Control (1X, 2X)
A
Alarm Setting (6h, 4h, 2h, OFF)
C
Cam Control (scan, view, add, del)
t
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and reading display
HH ºC / ºF > 36ºC / 97 ºF)
Icon & readings turn RED < 14ºC / 57ºF, and reading display
LL ºC / ºF < 1ºC / 34 ºF)
11.
Temperature Sensor
6
10
5
4
3
2
1
11
9
7
8
to be causing interference.
Table of contents 5
ENGLISH
Table of contents
1. Safety Instructions ......................................................................... 6
2. Getting Started ............................................................................... 8
2.1 Baby Unit Power Supply.................................................................8
2.2 Parent Unit Battery Installation .......................................................8
2.3 Parent Unit Power Supply ..............................................................9
2.4 Registration (Pairing)....................................................................10
3. Using the Baby Monitor
............................................................. 11
3.1 Setting up .....................................................................................11
3.2 Pan and Tilt ..................................................................................11
3.3 Night Vision Mode ........................................................................11
3.4 Talk Mode.....................................................................................11
3.5 Video ON/OFF..............................................................................11
3.6 Temperature Display (HH ºC / ºF or LL ºC / ºF)............................12
4. Parent Unit Menu2SWLRQV
........................................................... 13
4.1 Volume .........................................................................................13
4.2 Brightness.....................................................................................13
4.3 Lullaby ..........................................................................................13
4.4 Zoom ............................................................................................13
4.5 Alarm ............................................................................................14
4.6 Camera Control ............................................................................14
4.6.1 Add (pair) a camera .......................................................14
4.6.2 View a camera ...............................................................14
4.6.3 Delete a camera .............................................................15
4.6.4 Scan the cameras ..........................................................15
4.7 Temperature.................................................................................15
5. Disposal of The Device (environment) ....................................... 16
6. Cleaning ........................................................................................ 17
7. Help................................................................................................ 18
8. General Information ..................................................................... 20
6 Safety Instructions
1. Safety Instructions
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's
Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
Adult assembly is required. Keep small parts away from children when
assembling.
This product is not a toy. Do not allow children to play with it.
This baby monitor is not a substitute for responsible adult supervision.
Keep this user's guide for future reference.
Do not place the baby unit or cords in the crib or within reach of the
baby (the unit should be 3 feet away).
Keep the cords out of reach of children.
Do not cover the baby monitor with a towel or blanket.
WARNING:
STRANGULATION HAZARD - Keep the unit and adapter cord
NEVER place camera or cords within the crib.
Secure the cord more than 3 feet away from the baby's reach.
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
CAMERA SET UP & USE:
Determine a location for the CAMERA that will provide the best
view of your baby in his crib.
Place the CAMERA on a flat surface, such as a dresser, bureau,
or shelf.
NEVER place camera or cords within
more than 3 feet from the crib out of the baby's reach.
the crib.
and cords more than
Safety Instructions 7
ENGLISH
Never use extension cords with power adapters. Only use the power
adapters provided.
Test this monitor and all its functions so that you are familiar with it
prior to actual use.
Do not use the baby monitor near water.
Do not install the baby monitor near a heat source.
Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and
battery pack.
Only insert a battery pack of the same type.
Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
8 Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the small plug of the power adapter to the baby unit and the
other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5.9V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position. The power LED will
light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2 Parent Unit Battery Installation
1. Insert the wire tab of the rechargeable battery pack into the contact
slot as shown above and fit the battery pack into the compartment.
2. Replace the battery cover over the compartment and gently tighten
the screw in a clockwise direction using a Small cross head or Flat
end screw drivers.
Black Red
Small cross head or
Flat end screw driver
Getting Started 9
ENGLISH
2.3 Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event
of a power failure.
1. Connect the small plug of the power adapter to the parent unit and
the other end to the electrical outlet. Only use the enclosed power
adapter (6V DC/500mA).
2. Press and hold the
P POWER ON/OFF button for 1 second to
turn ON the parent unit.
3. Once the baby and parent units are switched on, the display on the
parent unit will show the video captured by the baby unit.
4. If there is no connection or you are out of range, the video display
will go off and the words
No Signal
will be shown on the LCD display,
and the unit will beep every 5 seconds. Move the parent unit closer
to the baby unit until the link is re-established.
5. Press and hold the
P POWER ON/OFF button, until the progress
bar finishes scrolling, to turn OFF the parent unit.
NOTE
The battery icon turns RED to indicate that the battery is low, and it
gives a beep every 16 seconds. The battery needs to be recharged. The
battery pack takes about 16 hours to charge fully.
When charging
1.
0
lights up to indicate the adapter is plugged in.
briefly, followed by a large battery icon with internal
If the parent unit is turned OFF, when the adapter is plugged in, a mains
plug logo will display
segments cycling for 45 seconds. The Blue LED in the top left corner
10 Getting Started
2.
2.4 Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need
to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
1. Press the
M Menu button of the parent unit and the menu bar will
2. Press the
< LEFT button or > RIGHT button until C is highlighted,
and the
del/add/view/scan
menu will pop up.
3. Press the
+ UP button or - DOWN button to select
ADD
, and press
the OK button to confirm.
4.
CAM 1
/
CAM 2
/
CAM 3
/
CAM 4
will pop up, press the + UP button or -
DOWN button to select the desired CAM and press the OK button to
start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5.
Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
pop up.
corner lights up to indicate the adapter is plugged in.
If the parent unit is turned ON, when the adapter is plugged in, the
battery icon in the screen's top right corner will show that the battery is
charging by cycling the internal segments, The Blue LED in the top left
Using the Baby Monitor 11
ENGLISH
3. Using the Baby Monitor
3.1 Setting up
Place the baby unit in a convenient location (e.g. on a table) and point
the camera lens towards the area you want to monitor.
Adjust the baby unit's head angle by using the parent unit to pan and
NOTE
Do not place the baby unit within the baby's reach! If there is interference
ensure they are not close to other electrical equipment.
3.2 Pan and Tilt
The camera can be remotely controlled from the parent unit when in
1. Press the
+ UP button or - DOWN button to tilt upward or downward.
2. Press the
< LEFT button or > RIGHT button to pan left or right.
3.3 Night Vision Mode
The baby unit has 8 high-intensity infrared LEDs for picking up clear images
in the dark. When the built-in photo sensor detects a low level of ambient
light, the LEDs will automatically activate and the screen on the parent unit
will display in black and white. The
N icon will be displayed on the screen.
3.4 Talk Mode
Press and hold the T TALK button on the parent unit to talk to your baby
through the baby unit's loudspeaker. The
T icon will be displayed at the
top of the LCD screen.
3.5 Video ON/OFF
Press the
V
VIDEO ON/OFF key to turn the LCD display on or off, but
still leave the audio monitor on.
normal video mode.
with the picture or sound, try moving the units to different locations, and
image in the parent unit.
tilt the camera up, down, left and right until you are satisfied with the
12 Using the Baby Monitor
3.6 Temperature Display (HH ºC / ºF or LL ºC / ºF)
The temperature reading from the temperature sensor at the back of
the Baby Unit will be displayed at the top of the LCD screen. The
readings will turn RED if the temperature goes above 29ºC / 84ºF or
below 14ºC / 57ºF. The reading will change to HH ºC / ºF if the
temperature goes above 36ºC / 97ºF. The reading will change to LL ºC /
ºF if the temperature goes below 1ºC / 34ºF.
Parent Unit Menu Options
ENGLISH
4.
3DUHQW8QLW0HQX2SWLRQV
4.1 Volume
1. Press the M Menu button and the menu bar will pop up.
2.
< LEFT button or > RIGHT button until
*
3. Press the
+ UP button or - DOWN button to select the desired
volume level from level 1 ~ 8. (The default volume level setting is
level 4.)
4.2 Brightness
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until
& is highlighted.
3. Press the
+ UP button or - DOWN button to select the desired
brightness level from level 1 ~ 8. (The default brightness level setting
is level 4.)
4.3 Lullaby
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until
m is highlighted.
3. Press the
+ UP button or - DOWN button to select the desired song
from the 5 lullabies available, or the cycle option to play all 5 songs in
turn. If an individual song is selected it will play
(The default setting is lullaby OFF)
4. Press
4.4 Zoom
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until
Z is highlighted.
13
is highlighted.
If necessary, press the
repeatedly.
MENU to return to the normal camera view with the lullaby
playing or off, as selected.
NOTE
,IWKH7$/.EXWWRQLVSUHVVHGDQ\OXOODE\ZLOOVWRSSOD\LQJDXWRPDWLFDOO\
3. Press the
+ UP button or - DOWN button to select the
1X
or
2X
Zoom. (The default setting is 1X.)
14
4.5 Alarm
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until A is highlighted.
3. Press the
+ UP button or - DOWN button to select the alarm time
(
6h
,
4h
,
2h
). (The default setting is Alarm OFF.)
If an alarm is set, the parent unit will beep for about 45 seconds
after every 6, 4 or 2 hour period, and the alarm icon will flash red.
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted,
and the
del/add/view/scan
menu will pop up.
3. Press the
+ UP button or - DOWN button to select
ADD
, and press
the OK button to confirm.
4.
CAM 1
/
CAM 2
/
CAM 3
/
CAM 4
will pop up, press the + UP button or -
DOWN button to select the desired CAM, and press the OK button
to start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button under the baby unit until the parent
unit finds the camera, beeps and the camera picture appears.
NOTE
A camera can only be registered to one parent unit at a time.
4.6.2 View a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted
and the
del/add/view/scan
menu pops up.
3. Press the
+ UP button or - DOWN button to select
VIEW
, and press
the OK button to confirm.
Parent Unit Menu Options
4.
CAM 1
/
CAM 2
/
CAM 3
/
CAM 4
will pop up, press the + UP button or -
DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
TIP
OK repeatedly for a quick way to View cameras without the menu.Press
Parent Unit Menu Options 15
ENGLISH
4.6.3 Delete a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted,
and the
del/add/view/scan
menu will pop up.
3. Press the
+ UP button or - DOWN button to select
DEL
, and press
the OK button to confirm.
4.
CAM 1
/
CAM 2
/
CAM 3
/
CAM 4
will pop up, press the + UP button or -
DOWN button to select the desired CAM, and press the OK button
to select.
4.6.4 Scan the cameras
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted,
and the
del/add/view/scan
menu will pop up.
3. Press the
+ UP button or - DOWN button to select
SCAN
, and press
the OK button to confirm.
4. The screen will then display images from each registered camera in
a loop, changing about every 12 seconds.
4.7 Temperature
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until t is highlighted.
3. Press the
+ UP button or - DOWN button to select ºC or ºF.
Press the
+ UP button or
- DOWN button to select , and press
5.
the button to delete that registration.
OK
TIP
OK repeatedly for a quick way to go to
6FDQPRGH without XVLQJ
the menu.
Press
,IWKHSDUHQWXQLWLVLQVFDQPRGHDQGRQHRIWKHUHJLVWHUHGFDPHUDVLV
WXUQHGRIIRURXWRIUDQJHWKHVFDQZLOOVWRSDWWKHPLVVLQJFDPHUD
GLVSOD\QRVLJQDOFKHFNRUGHOFDPLIFDPHUDLVPLVVLQJDQG
HPLWDZDUQLQJEHHSHYHU\VHFRQGV
NOTE
&KHFNWKHFDPHUDDQGFRUUHFWWKHIDXOWLPPHGLDWHO\LI\RXDUHXVLQJWKDW
FDPHUDWRPRQLWRU\RXUEDE\
,I
\RXZDQWWRFRQWLQXHLQFDPHUDVFDQPRGHZLWKRXWWKDWFDPHUDGHOHWH
WKHFDPHUDVHH'HOHWHDFDPHUDDQGVWDUWWKHVFDQDJDLQ
WARNING
16 Disposal of The Device (environment)
5. Disposal of The Device
(environment)
At the end of the product lifecycle, you should not dispose
of this product with normal household waste. Take this
product to a collection point for the recycling of electrical
and electronic equipment. The symbol on the product,
user's guide and/or box indicates this.
Some of the product materials can be reused if you take
them to a recycling point. By reusing some parts or raw materials from
used products you make an important contribution to the protection of the
environment.
Please contact your local authorities in case you need more information
on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner
according to your local regulations.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Motorola MBP43-3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Motorola MBP43-3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Motorola MBP43-3

Motorola MBP43-3 Gebruiksaanwijzing - Nederlands - 28 pagina's

Motorola MBP43-3 Gebruiksaanwijzing - Deutsch - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info