655727
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
IMPORTANT
You cannot access the battery in
the handset. Do not attempt to
remove the battery, as you may
damage the phone. If you need
to replace the battery, contact
customer services.
When the handset is fully
charged, plug the telephone
line cord into the socket
marked
on the underside
of the base and plug the other
end into the telephone wall
socket.
Step 4. Removing the battery
cover:
NOTE
Position the base at least 1
metre away from other electrical
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
A Paging key
Paging is a useful way of nding
lost handsets.
Press p on the base.
All handsets ring.
Press p again to cancel the
paging call or press any key on
the handset to stop the paging
call.
IMPORTANT
The base station must be plugged
into the mains power at all times.
Do not connect the telephone line
cord into the wall socket until the
handset is fully charged. Only use
the power and telephone cables
supplied with the product.
Step 2. Connect the charger
(Multi-pack only)
Plug the mains power cable
into the socket marked
on
the underside of the charger
and plug the other end into the
mains power wall socket.
Switch on the power supply.
Step 3. Charge the handset
Place the handset on the base
and charge for at least 24
hours. When the handset is
fully charged, the
icon is
displayed.
If you have purchased a multi pack
you will also have the following
additional items:
Twin 1 x Additional handset
and charger.
1 x Mains power
adaptor for charger.
Trio 2 x Additional handset
and charger.
2 x Mains power
adaptor for charger.
Quad 3 x Additional handset
and charger.
3 x Mains power
adaptor for charger.
IMPORTANT
Only use the telephone line cord
supplied. This equipment is not
designed for making emergency
telephone calls when the power
fails. Alternative arrangements
should be made for access to
emergency services.
Warning! You cannot access the
battery in the handset.
BATTERY LOW WARNING
If you hear a warning beep every 2
minutes during a call, you will need
to recharge the handset before you
can use it again.
When charging,
icon will scroll
on the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged
battery should give up to 7 hours
talk time or up to 130 hours standby
time on a single charge.
1
Note that the new battery does not
reach the full capacity until it has
been put to normal use for several
days.
To keep the battery in the best
condition, leave the handset o the
base for a few hours at a time.
1
All talk and standby times are
approximate and depend on
features selected and usage
pattern.
Step 1. Set up the base
Plug the mains power cable into
the socket marked
on the
underside of the base and plug
the other end into the mains
power wall socket.
Switch on the power supply
Box Contents Box Contents Getting started
Display icons
Menu navigation
On when the line is in use.
Flashes when there is an incoming call.
Flashes when you have missed calls and new number(s) are in the
Calls list.
Handset ringer is o.
Steady when the handset is registered and within range of the base. Disappears
when the handset is out of range and flashes when searching for the base.
Flashes when you have new voicemail messages.
O when you have no voicemail messages.
Phonebook is open.
The alarm clock has been set.
Hands-free mode is activated.
Answering machine is on.
The approximate power levels of your battery are indicated as
below:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Battery is almost empty. The battery icon will flash and emit a warning
beep every 2 minutes during call.
Handset
Display
Call Log / Scroll Up /
Volume up
Open the Call log. Press
u
to enter Call Log menu and
then press
d to select
Call
List
or
Answ machine
menu.
Scroll up through lists and
settings.
Increase the earpiece
volume during a call.
Menu / OK
Enter the main menu.
Select the option displayed
on screen.
Conrm menu option – OK
is displayed on screen.
Redial
Open the redial list.
Talk / Hands-free key
Make or answer a call.
Activate and deactivate
hands-free during a call.
IMPORTANT
Hands-free activation can
suddenly increase the
volume in the earpiece to a
very high level. Make sure
the handset is not too close
to your ear.
Pulse to Tone Dialling / * /
Keypad lock
During a call, press and hold
to switch from pulse dialling
to tone dialling.
Dial a *.
In standby mode press and
hold to lock/unlock the
keypad.
Scroll right / Clear / Mute
/ Back
Scroll to the right.
Delete characters on screen
when entering names and
numbers.
Mute / unmute the
microphone during a call.
Go back to previous menu
level
is displayed on
the screen.
End call / Switch handset
on/o
End a call.
When in a menu, go back to
standby mode.
Press and hold to switch
handset o (when in
standby) or on.
Intercom
Press to make an internal call.
Phonebook / Scroll Down /
Volume down
Open the phonebook.
Scroll down through lists and
menus.
Decrease the earpiece volume.
Ringer o / Recall / # /
Change case
Press and hold to switch
handset ringer on or o.
Use recall (R) functions.
Dial a #.
When entering letters
/ editing, short press to
change the case from Abc to
abc or ABC mode.
Pulse / Space
When dialling or storing a
number, press and hold to
enter a pause (P).
Microphone
Digital Cordless Telephone with
Answering Machine
IT6TX Quick Start Guide
Models: IT.6.1TX, IT.6.2TX, IT.6.3TX and IT.6.4TX
This Quick Start Guide provides all the information
you need to get you started. If you need more detailed
instructions, please refer to the full user guide available
in the giftbox.
Alternatively, contact Customer Services on:
0800 0820750.
Opening hours: Mon-Fri: 9:00am - 5:30pm
/Sat: 9:00am - 2:00pm.
IT6TX base
IT6TX handset
Mains power adaptor for
the base
Guides
Telephone line cord
A
If you have purchased an IT.6TX with
extra colour covers or have purchased
the covers separately you will need to
remove the original cover to then replace
with the new cover.
To remove the cover push down
and slide the cover o.
To replace the cover, line up the
hooks on the cover with the slots
in the back of the handset and
slide up until it is in place.
Step 5. Set the date and time:
If you have subscribed to a Caller ID
Service and Auto Clock is set to on
the
date and time is set automatically
for all handsets when you receive
your rst call.
If you do not have a Caller ID
service, you can set the date and
time manually.
Press
M, scroll d to
Clock/Alarm
and press M.
Date & Time
is displayed. Press M.
Enter the date using the format
DD-MM-YY e.g. 04/08/15 for 4
August 2015 and press
M.
Enter the time using the 24 hour
format
HH:MM
, e.g. 14:45 for
02.45pm and press M.
Press
e to return to standby.
Earpiece
Navigating the menus
The basic steps of navigating through the menu and on-screen options.
From the standby screen, press
M.
The main menu is opened.
Use the
(u) or (d) keys to scroll through the menu.
Soft key options
OK
and are displayed.
Press M to select
OK
and open a sub-menu or validate an option.
Press b to go back to previous menu level, correct a character or
cancel an action.
Press
e to return to standby.
NOTE
If you do not press any button on the handset for 30 seconds the display
will automatically return to standby. It will also return to standby when the
handset is placed on the base or charger.
Push down
Remove
1
2
Slide
Replace
Line up hooks
on the back
cover with the
slots on the
handset
1
Slide
2
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Motorola IT.6.1TX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Motorola IT.6.1TX in de taal/talen: Engels als bijlage per email.

De handleiding is 3,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Motorola IT.6.1TX

Motorola IT.6.1TX Gebruiksaanwijzing - Deutsch - 56 pagina's

Motorola IT.6.1TX Gebruiksaanwijzing - English - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info