Charging your headset
See figure 1 on page 1
Important: you can only charge the headset from the desktop charger. You
cannot plug a Motorola charger directly into the headset.
1. Plug the Motorola charger into the port on the desktop charger.
2. Place headset onto desktop charger. Make sure charging contacts on the
headset and desktop charger connect.
Note: Earhook must be rotated to the orientation shown as on figure 1 on
page 1 to ensure charging contacts connect.
When placing headset on the desktop charger, the indicator light turns red
when the battery is charging. It may take up to 1 minute for the indicator light
to turn on. When the headset’s battery is fully charged (about 2.5 hours), the
indicator light turns green.
Note: Headset is NOT functional while charging.
Turning headset on and off
See figure 1 on page 1
To turn ON your headset, slide the Power switch towards the power symbol,
as shown below. The indicator light first flashes blue for several seconds,
then:
• ashes blue (if paired and connected with another device).
• becomes steadily blue (if ready to be paired).
To turn OFF your headset, slide the Power switch off. The indicator light will
turn off.
