68107
9
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
Using the phone 9
EN
3. Using the phone
Calls
Make a call
1.
Press <.
2.
Dial the telephone number.
Pre-dial
1.
Enter the phone number (maximum 24 digits). If you make a mistake press e.
2.
Press < to dial the phone number entered.
Dial one touch numbers 1 to 9
1.
Press and hold a key from 1 to 9 until the number is displayed and dialled.
- If no number is stored, you hear a beep.
Call from the phonebook
1.
Press d. The first entry in the phonebook is displayed.
2.
Scroll u or d to the entry you want.
3.
Press < to dial the number.
TIP
Instead of scrolling to browse the phonebook entries, press the numeric key corresponding to the
first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting
with A. Pressing 2 again will show the entries starting with B, etc...
Call from the calls list
NOTE
You need to subscribe to your network’s Caller Line Identification service to be able to see the
caller’s number in the calls list. See “Calls list” on page 13 for more details.
1.
Press u to enter
CALL LOG
menu. You have the options to access
CALL LIST
or
ANSW MACHINE
.
Press m to enter
CALL LIST
. The first entry in the call list is displayed.
2.
Scroll u or d to the entry you want.
3.
Press < to dial the number.
Answer a call
1.
When the phone rings and flashes in the display, press < or press v to answer the call
via the loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing. Handsfree activation can suddenly increase the volume in the earpiece to a very high
level. Make sure the handset is not too close to your ear.
NOTE
If you have subscribed to your Network’s Caller Identity service and assigned a VIP Group to the
caller’s number, the caller’s details are displayed before the phone starts ringing (see “Store an
entry” on page 11 and “Group melody” on page 15). You can set your phone to give the default
ringtone as soon as the call is received then once the caller’s identity is displayed, the assigned
ringtone will start. See “First ring” on page 15.
TIP
If Auto Pick up mode (see page 15) is on, simply lift up the handset from its base to answer the
call. The default setting is On, in which case you will need to press < to answer a call.
NOTE
An incoming call has priority over other events. Whenever there is an incoming call, other
operations in progress such as phone settings, menu navigation, etc. will be ended.
Adjust volume
1.
During a call, press u or d to adjust the earpiece or loudspeaker volume.
- The level is shown in the handset display.
Mute
Mute the microphone so that you can talk to someone else in the room without your caller hearing
you.
1.
During a call, press e.
- The microphone is muted.
2.
Press e again to turn the microphone back on.
End a call
1.
Press >.
After you hang up, the duration of your call is displayed for 5 seconds.
NOTE
If auto hang-up is on (see page 15) simply replace the handset on the base to end the call. The
default setting is ON.
Switch handset on/off
1.
Press and hold > until the handset switches off.
2.
Press and hold > again to switch the handset back on.
Call a second external number
Put an external caller on hold to make a second external call. You can then switch between both
callers or hold a 3-way conference call.
1.
During your call, press m. Scroll d to
INIT 2ND CALL
.
2.
Press m.
- Display shows
CALLING R
3.
Enter the second number.
4.
When your second caller answers, press m to open the option menu:
CONFERENCE
– press m to initiate a 3-way with an external caller and internal caller.
SWITCH CALLS
press m to switch between the two callers.
5.
Press > to hang up.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make
internal calls, transfer external calls from one handset to another and use the conference option.
D711_IFU_EN_for_EU.book Page 9 Friday, August 24, 2007 3:58 PM
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Motorola-D712

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Motorola D712 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Motorola D712 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 17,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Motorola D712

Motorola D712 Gebruiksaanwijzing - English - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info