765190
28
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Bedienungsanleitung / Exercise Monitor Instruction
5. Quick Start Funktion (manuell)
5.1 Schalten Sie das Gerät ein und stecken Sie den
Safety-Key in die Konsole ein.
5.2 Drücken Sie die START/STOP-Taste. Es erscheint ein
3-Sekunden-Countdown auf dem Zeitdisplay und das
Gerät piepst. Nach den 3 Sekunden startet das Gerät
mit einer Geschwindigkeit von 0,8km/h.
5.3 Drücken Sie die SPEED+/- Tasten, um die
Geschwindigkeit nach Belieben anzupassen.
6. Manueller Modus:
6.1 Drücken Sie START im Standby-Modus, um mit der
Geschwindigkeit 0,8km/h anzufangen. Die anderen
Displays beginnen mit dem Hochzählen. Drücken Sie die
SPEED+/- Tasten, um die Geschwindigkeit anzupassen.
6.2 Drücken Sie die MODE-Taste im Standby-Modus,
um die Zeit einzustellen. Das Zeit-Display zeigt den
Standardwert von 30:00 Minuten an. Drücken Sie
die SPEED+/- Tasten, um die gewünschte Zeit
einzustellen. Die Spanne beträgt 5:00 – 99:00.
6.3 Drücken Sie die MODE-Taste in der Zeit-Einstellung,
um zur Distanz fortzufahren. Das Distanz-Display
zeigt den Standardwert von 5,0km an. Drücken Sie
die SPEED+/- Tasten, um die gewünschte Distanz
einzustellen. Die Spanne beträgt 0,5 – 99.
6.4 Drücken Sie die MODE-Taste in der Distanz-Einstellung,
um zu den Kalorien fortzufahren. Das Kalorien-Display
zeigt den Standardwert von 100kcal an. Drücken Sie die
SPEED+/- Tasten, um den gewünschten Kalorienverbrauch
einzustellen. Die Spanne beträgt 20-990.
6.5 Wählen Sie eine der drei obigen Modi und drücken
Sie START, um zu beginnen. Drücken Sie die SPEED
+/- Tasten, um die Geschwindigkeit anzupassen.
Drücken Sie STOP, um das Workout zu beenden.
7. Voreingestellte Programme
Dieses Gerät enthält 12 voreingestellte Programme
P1 – P12. Drücken Sie im Standby-Modus die
“PROGRAM”-Taste und das Geschwindigkeitsdisplay
zeigt P1 – P12 an. Nachdem Sie das gewünschte
Programm ausgewählt haben, blinkt das Zeitdisplay und
zeigt den Standardwert von 30:00 Minuten an. Drücken
Sie die SPEED+/- Tasten, um die gewünschte
Workout-Zeit einzustellen. Drücken Sie START, um das
ausgewählte Programm zu beginnen. Die voreingestellten
Programme sind in 10 Intervalle eingeteilt. Jedes Intervall
ist jeweils ein Zehntel der von Ihnen eingestellten Zeit.
Während des Workouts können Sie Geschwindigkeit
über die Tasten verändern, im nächsten Intervall springt
es jedoch wieder zurück zum voreingestellten Wert.
Das Gerät piept 3-mal, wenn das Programm zu Ende
ist und hält langsam an. Nach 5 Sekunden ohne Aktivität
schaltet sich das Gerät in den Standby-Modus.
5. Quick Start Function (manual)
5.1 Switch on the treadmill and insert the safety key
into the console.
5.2 Press the START / STOP button. A 3-second
countdown appears on the time display and the
device beeps. After 3 seconds, the unit starts at a
speed of 0.8km/h.
5.3 Press the SPEED +/- buttons to select the desired
speed.
6. Manual Mode:
6.1 Press START in standby mode to start at 0.8km/h.
The other displays start counting. Press the SPEED
+/- buttons to select the desired Speed.
6.2 Press the MODE button in standby mode to set the
time. The time display shows the default value of
30:00 minutes. Press the SPEED +/- buttons to
select the desired time. The range is 5:00 - 99:00.
6.3 Press the MODE button in the time setting to
continue to the distance. The default distance value
of 5.0km. Press the SPEED +/- buttons to select
the desired distance. The range is 0.5 - 99.
6.4 Press the MODE button in the distance setting to
continue to the calories. The calorie display shows
the default value of 100kcal. Press the SPEED +/-
buttons, to adjust the desired calorie consumption.
The range is 20-990.
6.5 Select one of the above three modes and press
START to start. Press the SPEED +/- buttons to
adjust the speed. Press STOP to exit the workout.
7. Preset Programs
This unit contains 12 preset programs P1 - P12. In
standby mode, press the PROGRAM button and the
speed display will show P1 - P12. After selecting the
desired program, the time display flashes and displays
the default value of 30:00 minutes. Press the SPEED
+/- buttons to set the desired workout time. Press
START, to start the selected program. The default
programs are in 10 intervals. Each interval is one tenth
of the time you set. During the workout you can change
the speed using the buttons, but it will jump again in the
next interval. Back to the default value, the device beeps
3 times when the program is finished and stops slowly.
After 5 seconds without activity, the unit goes into
standby mode.
76 89 94 99 76 103 108 113 76 117 122 127
77 88 93 98 77 102 107 112 77 117 122 127
78 87 92 97 78 102 107 112 78 116 121 126
79 87 92 97 79 101 106 111 79 115 120 125
80 86 91 96 80 100 105 110 80 114 119 124

28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Motive FIitness - U.N.O. V-Fit Speed Master 1.8M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Motive FIitness - U.N.O. V-Fit Speed Master 1.8M in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info