744387
23
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
23
1.6 Connecting the ue pipe
The ue collar can be rotated and be used for ø150 (inside and outside the ue collar) and
ø120 connections.
Mounting the ue collar pointing upwards
From the factory, the stove is prepared for installation with the ue collar provided (1) point-
ing upwards. The ball stop, which prevents the chimney sweep from damaging the stove’s
bae plates while sweeping, is the 128 mm long rod that is provided in the stove. The ue
collar stop bar is tted when installing the chimney.
Mounting the ue collar to the rear
Lift the top panel and convection back panel from the stove.
Remove the smoke outlet from the top outlet. The smoke outlet must not be used when
connecting the ue pipe to the rear.
Remove the round plate which is xed with 2 screws at the rear of the stove and x it in-
stead on the top outlet.
With a hammer use light, rm taps to knock out the iron piece on the convection back panel
from the small “bridges” holding the piece in place.
When connecting the flue pipe to the rear, use the
other cast smoke outlet supplied with 40 mm inser-
tion depth.
The ball stop must not be used when installing the ue
collar to the rear.
Lift the top panel and convection back panel back into
place.
A round section is provided which can be placed in the
top panel and cover for the blocked o smoke outlet.
The location of the baes
The baes (2) and (3), which are made from vermicu-
lite, are mounted on delivery.
Make sure that the baes are correctly assembled be-
fore lighting the stove (please see the sketch).
Fresh air connection, if required
Downwards:
The stove is tted ex works with a branch piece under
the stove for fresh air connection, if required.
Rearwards:
Lift the top plate and convection back panel o the stove and
remove the branch piece under the stove. Remove the round
plate tted with two screws at the bottom at the back of the
stove and, instead, attach it where the branch piece was pre-
viously tted under the stove. Re-t the branch pipe where
the round plate was previously tted at the back of the stove.
The iron piece at the bottom of the convection back panel is
knocked out with light, rm taps with a hammer next to the
small ”bridges” holding the piece in place. Lift the convection
back panel and top plate back into place.
B
B
B-B
1
2
3
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:5
Snit til vejledning
Morsø S10-40
RSV
25.08.2010
A4
Date of print: 24-11-2010
U:\udv\Tegninger\Pladejernsovne 2010\S10-40\S10-40.SLDASM
S10-06 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Morso 4000 series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Morso 4000 series in de taal/talen: Engels, Deens als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Morso 4000 series

Morso 4000 series Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info