Assembly
1 Place juice collector on top of
the motor base aligning the
spout with the corresponding
cut out in the base A.
2 Place the mesh filter basket
inside, pushing down to make
sure it clicks firmly into place
B.
3 Place the juicer cover on top
ensuring that the juice cover
spout and outlet for the juice
collector are aligned.
4 Lift the locking arm up and lock
into place on top of the juicer
cover C.
NOTE: The juice extractor will
not work if the locking arm is
not correctly in place C.
IMPORTANT: Do not pick up
the juice extractor using the
locking arm.
5 Tilt the pulp container slightly
to fit under the juice cover D.
6 Put the juice container under
the spout ensuring the froth
guard is fitted correctly.
7 Place the large food pushers
into the food shoot and the
small food pusher can be
locked into place by rotating.
Juicing
1 Plug the juicer into the
electrical socket.
2 Ensure that both the juice
container, pulp container and
froth-guard are in place.
3 Most fruit and vegetables can
be put into the Juice Extractor
with the peel in place. Ensure
the fruit or vegetables are
thoroughly washed, to remove
any dirt or chemicals, if you are
concerned with the quality of
the peel, remove it first.
Remember what you put into
the Juicer, you will get out as
juice.
• Citrus peel (eg. oranges,
lemons) and thick fruit peel (eg.
pineapple, bananas) must be
removed first.
• Stones or large pips will have
to be removed before juicing.
Pips from apples and oranges
are acceptable, anything larger
or harder will need to be
removed.
• Cut into suitable size pieces to
fit into the fruit shoot. Usually
apples need only to be cut in
half.
4 Switch to the appropriate
speed, as indicated in the
Speed Selector table.
5 If juicing larger pieces, use the
large food pusher (with the
small pusher locked in place)
apply gentle force, to press the
fruit down E.
For juicing small pieces ie
grapes, or carrots, unlock the
small pusher (by rotating), place
the large pusher in the fruit
shoot, and feed the
fruit/vegetables through the
hole in the large pusher, apply
gentle force to press the fruit
down F.
Using the correct size pusher
for the size of pieces being
juiced is essential to prevent
splashing and efficient juice
yield.
6 With the motor running place
food into the fruit shoot.
5
www.morphyrichards.com
A
B
C
D
E
F
