8
www.morphyrichards.com
minutes before operating the
machine again.
Warning: For safety, always
leave the pusher in place
whilst operating the
processor.
Whisk attachment
1 Fit the processor bowl as
detailed previously in ‘Setting
up’.
2 Place the whisk attachment
onto the motor drive.
3 Add ingredients into the bowl.
4 Fit the lid, food pusher and
click into place as detailed in
‘Setting up’.
5 Plug in the processor.
6 Turn the processor on.
IMPORTANT: Never use the
whisk attachment for dough
kneading.
Slicing & Chopping
There is a choice of blades;
slicing, shredding and chipping
(only on certain models).
1 Fit the processor bowl as
before on the motor drive.
2 Fit detachable drive shaft.
3 Place the blade of your choice
on top of the detachable drive
shaft, holding the blade by the
centre grip. Ensure that the
teeth are facing upwards.
WARNING: Use extreme
caution - the blades are
sharp.
4 Fit the lid and click into place
as detailed in ‘Setting up’.
5 Fit the large food pusher into
the tube on the processor lid.
6 Use the small food pusher to
add food into the processor
bowl through the feeder tube.
Mini processor bowl
Use the mini processor bowl to
chop herbs and small quantities
of ingredients.
1 Fit the mini chopping bowl on
the processor body, as detailed
previously in ‘Setting up’.
2 Slot the mini processor bowl
into the main processor bowl,
ensuring that the locators on
the processor bowl align with
the slots in the mini processor
bowl.
3 Using only the small blade,
place on top of the motor drive.
This fits in the hole in the mini
processor bowl.
4 Add the food.
5 Fit the lid, ensuring that it is
correctly located.
6 Operate the processor for 2 to
5 seconds only.
OPERATING
CONTROLS
The processor control has 1
speed and a pulse button.
Using the pulse button allows
greater control over the texture
of the food produced. It is only
intended to be used for short
‘bursts’ of processing or
blending.
CLEANING
ACCESSORIES
1 Switch the processor off and
unplug from electrical socket.
2 All accessories and processor
tools can be washed in hot
soapy water except for the
processor body.
WARNING: Extreme care
must be taken when
washing the metal blades as
these are extremely sharp.
3 Clean the processor body with
a damp cloth.
WARNING: Always unplug
the appliance body before
cleaning.
STORAGE
• Place the protective cover on to
the chopping blade and small
blade and place into the
storage container for storage.
