3
www.morphyrichards.com
S
pecial Instructions
• If your iron does not work, check
the following points:
H
as the temperature control been
set to the required temperature’ Is
the plug in its socket’ Is the plug
i
tself or the socket faulty’ (Check by
p
lugging in another appliance).
•
WARNING: When not in use,
your iron should never be
p
laced flat and left on an
ironing board.
• To prevent damage to the textile
being ironed, follow the temperature
guide carefully.
(Test the inside of the hem of the
garment).
•
When ironing is complete, remove
t
he plug from the socket, empty any
remaining water from the tank, and
allow to cool before storage.
•
If you drop or severely knock your
iron this could cause internal
damage even if the outside appears
a
lright. Have it checked by a
q
ualified electrician.
• It is recommended that you use up
one beaker of water by operating
y
our iron’s steam and shot of steam
functions before ironing any clothes
as some dripping may occur while
your irons steam system is
activated.
g
INSTRUCTIONS FOR USE
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the
International Textile Care Labelling Code.
Symbol
(120˚C Max) Cool (160˚C Max) Warm (210˚C Max) Hot
Control knob
Do not iron
positions at all
Fabric Nylon, Acetates Wool, Polyester mixtures
e.g. Acrilan Courtelle, e.g. Polyester/Cotton
Orlon Triacetates, Cotton, Linen Rayon,
e.g. Tricel/Polyester Rayon mixtures,
e.g. Rayon/Linen
Ironing Iron on wrong side Fabrics requiring this setting
if moisture required usually require steam
use damp cloth pressing for heavy cotton,
(Not Acetate)
denim etc.
With water in tank Dry and spray Steam/spray/shot of steam
Jet clean
Without water in tank Dry ironing
