5
Before using your Hand Mixer for the first time,
wash the Beaters (4) in warm soapy water, rinse
and dry.
Before assembling the Hand Mixer, be sure the
power cord is unplugged from the wall power
socket and the Speed Selector (1) is at the 0
position, then plug in the power socket.
Your Hand Mixer is supplied with two Beaters (4).
The Beaters (4) may be fitted in either Hand Mixer
socket, as they are identical.
The max operating time should not exceed 5
minutes. A minimum of 20 minutes rest time
must be maintained before the Hand Mixer is
used again.
1.Plug the Hand Mixer into the wall power socket,
ensuring the speed selector is at 0.
2. There are 5 speed settings. Turn the speed
selector (1) to your desired setting and the
appliance will start working. To run the Hand
Mixer at high speed for intermittent bursts, press
the Turbo Button (3).
WARNING: Ensure there are no utensils in the
bowl before mixing
3. When mixing is completed, turn the Speed
Selector (1) to the 0 position, unplug the Hand
Mixer from the wall power socket.
4. If necessary, scape any excess mixture from the
Beaters (4) with a rubber or wooden spatula.
5. To remove the Beaters (4) simply press the ejector
button, ensuring the speed selector is set to 0.
Before First Use
Inserting The Beaters
Important
Using your Hand Mixer
