8
Dry ironing
To use your steam generator as a dry iron only,
follow steps 2, 3 and 4 of ‘Using the Steam
Generator’ on page 6. You do not need to put
water in the tank or select a steam level. Press
the steam trigger
(4) at least once every 10
minutes, or the product will automatically turn
off.
Auto shut-off
If
the iron
(11) is not used for 10 minutes, the
product will automatically turn off for safety and
to save energy, and a beep will be heard.
To restart, press the On/Off power button (20)
(see step 2 of ‘Using the Steam Generator’ on
page 6) and wait for the temperature to rise
again.
Steam function
During steaming, small amounts of water may be
ejected from the soleplate
(6)
. This is normal and
can be avoided by using the steam for short
amou
nts of time and only when the iron is at the
correct temperature (the temperature indicator
light (5) on the iron (11) goes out when ready).
Sudden jolts of the boiler unit can also cause
water droplets on the soleplate; therefore, do not
move the base unit during ironing.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, upholstery, etc.
Hold the iron
(11)
between 1cm and 2cm away
from the item and press the steam trigger
(4)
twice in quick succession for a longer boost of
steam. To turn the steam boost off, press the
steam trigger again.
WARNING: Do not use the vertical steam
feature on clothes that are being worn.
Features
When you have finished ironing, turn off the
appliance by pressing and holding the On/Off
power button (20) for three seconds. A beep will be
heard and the On/Off power button and steam level
indicator light (17) will be extinguished.
Disconnect the plug from the mains outlet.
Using the Steam Generator (continued)
