632639
128
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
USER MANUAL
Digital Hard Disk Recorder
(4/8/16 Channel, MPEG-4)
* Default system password: 111111
(for RAMS, Record stop, Menu setup, System off, Auto key lock)
* Default ID: admin (for RAMS)
2
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Table of contents
1. SYSTEM OVERVIEWS ..........................................................10
1.1 S
AFETY ................................................................................................................................10
1.2 C
OMPONENTS & OPTION...................................................................................................... 12
1.2.1 Components......................................................................................................................... 12
1.2.2 Options................................................................................................................................ 12
1.3 F
EATURES & SPECIFICATIONS ............................................................................................... 13
1.3.1 Specifications...................................................................................................................... 14
1.4 N
AME, FUNCTION & CONNECTIONS...................................................................................... 15
1.4.1 Front view ........................................................................................................................... 15
1.4.2 Rear panel view................................................................................................................... 19
1.4.3 Remote controller function.................................................................................................. 21
1.5 INSTALLATION................................................................................................................. 23
1.5.1 Installation and connection.................................................................................................. 23
1.5.1.1 Camera................................................................................................................................................ 24
1.5.1.2 Video Out............................................................................................................................................ 24
1.5.1.3 Audio .................................................................................................................................................. 25
1.5.1.4 RS-232................................................................................................................................................ 25
1.5.1.5 PTZ/AUX/ALARM............................................................................................................................ 25
1.5.1.6 Network .............................................................................................................................................. 26
1.5.1.7 USB flash memory.............................................................................................................................. 26
2. BASIC OPERATION PROCEDURES...................................27
2.1 P
OWER ON/OFF.................................................................................................................... 27
2.1.1 Power ON............................................................................................................................ 27
2.1.2 Power OFF.......................................................................................................................... 27
2.2 D
ATE & TIME SETTING.......................................................................................................... 27
2.3 C
HANGE OF LIVE VIDEO CHANNEL IN MULTI CHANNEL SCREEN ............................................ 27
2.4 P
ASSWORD SETTING PROCEDURE.......................................................................................... 27
2.5 N
ETWORK SETTING .............................................................................................................. 28
2.6 R
ECORDING.......................................................................................................................... 28
2.6.1 Recording types................................................................................................................... 28
2.6.2 Recording modes.................................................................................................................28
3
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
2.7 PLAYBACK ........................................................................................................................... 28
2.7.1 Press the Play button...........................................................................................................28
2.7.2 Audio Play........................................................................................................................... 28
2.8 S
EARCH................................................................................................................................28
2.8.1 Search mode........................................................................................................................ 28
2.8.2 Search method..................................................................................................................... 29
2.9 B
ACKUP ............................................................................................................................... 29
2.9.1 CD-RW................................................................................................................................ 29
2.9.2 USB flash memory Stick..................................................................................................... 29
2.10 C
LIENT PROGRAM................................................................................................................ 30
2.10.1 RAMS (Remote Access & Monitoring System).................................................................. 30
2.10.2 UniPlayer............................................................................................................................. 30
2.10.3 Quick Installer..................................................................................................................... 30
3 MAIN MENU SCREEN..............................................................31
3.1 C
AMERA SETUP MENU.......................................................................................................... 31
3.1.1 Channel ............................................................................................................................... 32
3.1.2 Camera Name...................................................................................................................... 32
3.1.3 Camera hide ........................................................................................................................ 33
3.1.4 Picture Setting..................................................................................................................... 33
3.1.4.1 Contrast, Brightness, Hue, .................................................................................................................. 34
3.1.4.2 Default ................................................................................................................................................ 34
3.1.5 PTZ setup............................................................................................................................ 34
3.1.5.1 Model No............................................................................................................................................ 35
3.1.5.2 PTZ ID................................................................................................................................................ 35
3.1.5.3 Reverse Control .................................................................................................................................. 35
3.1.5.4 RS-485 Setting.................................................................................................................................... 35
3.1.5.5 TEST................................................................................................................................................... 35
3.1.5.6 Additional PTZ Menus........................................................................................................................ 35
3.1.6 Spot ..................................................................................................................................... 36
3.1.7 Sequence Time .................................................................................................................... 36
3.1.8 Loop Through Setup............................................................................................................ 37
3.2 R
ECORD SETUP MENU .......................................................................................................... 37
3.2.1 Resolution ........................................................................................................................... 37
3.2.2 Audio Sync.......................................................................................................................... 37
4
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.2.3 Channel number ..................................................................................................................37
3.2.4 Quality................................................................................................................................. 37
3.2.5 Frame rate............................................................................................................................ 37
3.2.6 Record mode ....................................................................................................................... 38
3.2.7 Record Schedule Setup........................................................................................................ 39
3.3 E
VENT SETUP MENU ............................................................................................................ 40
3.3.1 Motion Detection Setting .................................................................................................... 40
3.3.1.1 Channel............................................................................................................................................... 41
3.3.1.2 Sensitivity........................................................................................................................................... 41
3.3.1.3 Detection Zone.................................................................................................................................... 41
3.3.2 Sensor Setting...................................................................................................................... 42
3.3.2.1 Sensor Type......................................................................................................................................... 42
3.3.2.2 Channel Link....................................................................................................................................... 42
3.3.3 Alarm input/ Output............................................................................................................ 43
3.3.3.1 Sensor ................................................................................................................................................. 43
3.3.3.2 Motion ................................................................................................................................................ 43
3.3.3.3 Relay Time.......................................................................................................................................... 43
3.3.4 Post Alarm Record Time ..................................................................................................... 43
3.3.5 FTP Setting.......................................................................................................................... 44
3.3.5.1 FTP Server IP address......................................................................................................................... 44
3.3.5.2 ID........................................................................................................................................................ 45
3.3.5.3 Password............................................................................................................................................. 45
3.3.5.4 Target Path.......................................................................................................................................... 46
3.3.5.5 FTP Length of Image (second)............................................................................................................ 46
3.3.6 FTP Trigger Setting.............................................................................................................46
3.3.6.1 Sensor ................................................................................................................................................. 47
3.3.6.2 Motion ................................................................................................................................................ 47
3.3.7 E-Mail Address Setting ....................................................................................................... 47
3.3.8 E-Mail Setting..................................................................................................................... 48
3.3.8.1 Send (Period) ...................................................................................................................................... 48
3.3.8.2 Prohibition setting............................................................................................................................... 49
3.3.8.3 SMTP Server IP address ..................................................................................................................... 49
3.3.8.4 Authentication..................................................................................................................................... 49
3.3.9 Event Log............................................................................................................................................ 49
3.4 P
LAYBACK SETUP ................................................................................................................ 50
3.4.1 Channel ............................................................................................................................... 50
5
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.4.2 Starting Point....................................................................................................................... 50
3.4.3 Audio................................................................................................................................... 51
3.5 D
ISPLAY SETUP.................................................................................................................... 51
3.5.1 Menu Transparency............................................................................................................. 51
3.5.2 VGA Set up ......................................................................................................................... 51
3.6 N
ETWORK SETUP MENU....................................................................................................... 52
3.6.1 DDNS setting ...................................................................................................................... 52
3.6.2 Remote Connection Login Password .................................................................................. 53
3.6.3 Network Type...................................................................................................................... 54
3.6.4 STATIC............................................................................................................................................... 55
3.6.4.1 DDNS Link On/off ............................................................................................................................. 55
3.6.4.2 Port...................................................................................................................................................... 55
3.6.4.3 IP Address........................................................................................................................................... 55
3.6.4.4 Subnet Mask ....................................................................................................................................... 55
3.6.4.5 Gateway.............................................................................................................................................. 55
3.6.5 DHCP.................................................................................................................................................. 56
3.6.5.1 Port...................................................................................................................................................... 56
3.6.6 PPPoE ................................................................................................................................................. 56
3.6.6.1 Port...................................................................................................................................................... 57
3.6.6.2 ID........................................................................................................................................................ 57
3.6.6.3 Password............................................................................................................................................. 57
3.6.6.4 DNS IP................................................................................................................................................ 58
3.6.7 Changing the Network configuration.................................................................................. 58
3.7 S
YSTEM SETUP SCREEN........................................................................................................ 58
3.7.1 DVR Name.......................................................................................................................... 59
3.7.2 System Password.................................................................................................................60
3.7.2.1 Password Setting................................................................................................................................. 60
3.7.2.2 Password Apply .................................................................................................................................. 61
3.7.2.3 Auto Key Lock.................................................................................................................... 61
3.7.3 Time / Date.......................................................................................................................... 61
3.7.3.1 Set up Time / Date............................................................................................................................... 62
3.7.3.2 Time / Date Format............................................................................................................................. 62
3.7.3.3 Day Light Saving Time....................................................................................................................... 62
3.7.4 Buzzer ................................................................................................................................. 63
3.7.5 Language............................................................................................................................. 63
3.7.6 HDD Setup.......................................................................................................................... 63
6
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.7.6.1 The number of HDD........................................................................................................................... 64
3.7.6.2 Write Mode......................................................................................................................................... 64
3.7.6.3 Forced Deletion( Previous few days).................................................................................................. 64
3.7.6.4 Hard Disk............................................................................................................................................ 65
3.7.7 Aux Port.............................................................................................................................. 65
3.7.7.1 Active.................................................................................................................................................. 66
3.7.7.2 Function.............................................................................................................................................. 66
3.7.8 Factory Default.................................................................................................................... 66
3.7.9 Software Upgrade................................................................................................................67
3.8 B
ACKUP ............................................................................................................................... 68
3.8.1 Backup Device .................................................................................................................... 68
3.8.2 Start Time............................................................................................................................ 68
3.8.3 End Time............................................................................................................................. 68
3.8.4 Channel ............................................................................................................................... 68
3.8.5 Event ................................................................................................................................... 69
3.8.6 Backup Start........................................................................................................................ 69
3.8.7 Format................................................................................................................................. 69
3.9 S
YSTEM LOG........................................................................................................................ 69
3.10 S
YSTEM INFORMATION......................................................................................................... 70
3.10.1 Video type ........................................................................................................................... 70
3.10.2 H/W version ........................................................................................................................ 70
3.10.3 S/W version......................................................................................................................... 70
3.10.4 KERNEL version ................................................................................................................ 70
3.10.5 Mac Address........................................................................................................................ 70
3.10.6 Audio................................................................................................................................... 70
3.10.7 Language............................................................................................................................. 70
3.11 S
EARCH MENU..................................................................................................................... 71
3.11.1 Search by Calendar..............................................................................................................71
3.11.1.1 Calendar View..................................................................................................................................... 72
3.11.1.2 Drawing Color .................................................................................................................................... 72
3.11.1.3 Hour( Time) ........................................................................................................................................ 72
3.11.1.4 Display by minutes ............................................................................................................................. 73
3.11.2 Search of Event ................................................................................................................... 73
3.11.2.1 Start time............................................................................................................................................. 73
3.11.2.2 Ending Time........................................................................................................................................ 73
3.11.2.3 Select the channel ............................................................................................................................... 73
7
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.11.2.4 Sample of Search ................................................................................................................................ 73
3.11.3 Still Image Search ............................................................................................................... 73
3.11.3.1 Still Image Search............................................................................................................................... 74
3.11.3.2 Still Image USB Back up.................................................................................................................... 74
3.11.3.3 Converting Still image file into JPG format........................................................................................ 74
3.12 PLAYBACK........................................................................................................................74
3.12.1 PLAYBACK of recorded Images........................................................................................ 74
3.12.1.1 Method of playback ............................................................................................................................ 74
3.12.1.2 Screen of played back......................................................................................................................... 75
3.12.1.3 Control during play back..................................................................................................................... 75
3.12.2 Playback of still image........................................................................................................ 76
3.12.2.1 Method of playback ............................................................................................................................ 76
3.12.2.2 Screen of playing back........................................................................................................................ 77
3.12.2.3 Control during Still Image Play back.................................................................................................. 77
3.13 M
ISCELLANEOUS MENU....................................................................................................... 78
3.13.2 NET..................................................................................................................................... 78
3.13.3 OSD..................................................................................................................................... 79
3.13.4 Audio Mute ......................................................................................................................... 79
3.13.5 HDD.................................................................................................................................... 79
3.13.6 LOG .................................................................................................................................... 79
4 CLIENT PROGRAM..................................................................80
4.1 O
VERVIEW OF DVR ............................................................................................................. 80
4.1.1 PC
REQUIREMENT (MINIMUM).............................................................................................. 80
4.2 I
NSTALLATION & EXECUTION OF PROGRAM.......................................................................... 80
4.3 RAMS_M4
(REMOTE ACCESS & MONITORING SYSTEM MPEG4)........................................ 81
4.3.1 Screen and button................................................................................................................ 81
4.3.2 Connecting to DVR............................................................................................................. 82
4.3.3 UniPlayer_M4 link.............................................................................................................. 83
4.3.4 Full-screen display .............................................................................................................. 83
4.3.5 Program setup...................................................................................................................... 84
4.3.6 DVR recording.................................................................................................................... 84
4.3.7 DVR playback search.......................................................................................................... 86
4.3.8 DVR playback search.......................................................................................................... 86
4.3.9 DVR backup........................................................................................................................ 89
8
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.10 DVR Setting........................................................................................................................ 90
4.3.11 Still image Capture.............................................................................................................. 90
4.3.12 Watermark insertion............................................................................................................ 91
4.3.13 Printing still image .............................................................................................................. 91
4.3.14 Motion picture recording..................................................................................................... 91
4.3.15 PAN/TILT, ZOOM/FOCUS. ............................................................................................... 92
4.3.16 HDD Information................................................................................................................ 93
4.3.17 Check the program version.................................................................................................. 93
4.3.18 S/W upgrade of DVR .......................................................................................................... 94
4.3.19 Program minimizing............................................................................................................ 95
4.3.20 Close program..................................................................................................................... 95
4.4 U
NIPLAYER_M4 .................................................................................................................. 95
4.4.1 Screen and button................................................................................................................ 95
4.4.2 Search.................................................................................................................................. 96
4.4.2.1 Search option from video image & backup file................................................................................... 96
4.4.2.2 Search option for still image............................................................................................................... 98
4.4.3 Searching by directory........................................................................................................................ 99
4.4.4 Still Image Capture ........................................................................................................................... 100
4.4.5 Input water mark ............................................................................................................... 101
4.4.6 Printing still image ............................................................................................................101
4.4.7 Moving picture file playback, playing, pause, temporarily pause, move .......................... 101
by interval of frame, fast forward Playing .................................................................................................. 101
4.4.8 Water mark drawing.......................................................................................................... 102
4.4.9 Panorama........................................................................................................................... 104
4.4.10 Check the program version................................................................................................ 105
4.4.11 Program minimizing.......................................................................................................... 105
4.4.12 Close Program...................................................................................................................105
4.5 Q
UICK INSTALLER.............................................................................................................. 106
4.5.1 Select model...................................................................................................................... 106
4.5.2 System parameter setting................................................................................................... 106
4.5.3 Communication over Network or serial port..................................................................... 107
4.6 C
ONNECTION BY INTERNET EXPLORER .............................................................................. 108
4.6.1 Security setup.................................................................................................................... 108
4.6.2 Download ActiveX control................................................................................................ 109
4.6.3 Connection with DVR....................................................................................................... 109
4.6.4 Login................................................................................................................................. 109
9
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.6.5 Connected screen................................................................................................................110
4.6.6 Search.................................................................................................................................110
4.6.7 Playback.............................................................................................................................111
5 APPENDIX ................................................................................112
5.1 I
NSTALLING HDD ...............................................................................................................112
5.1.1 HDD Install Methods .........................................................................................................112
5.2 T
ERMINAL INFORMATION....................................................................................................117
5.2.1 DSUB-9P (RS-232)............................................................................................................117
5.2.2 DSUB-15P (PTZ / AUX / ALARM / SENSOR)................................................................117
5.3 F
ACTORY DEFAULT VALUE ..................................................................................................119
5.3.1 Main Menu.........................................................................................................................119
5.3.2 Search Menu...................................................................................................................... 122
5.4 P
ROTOCOL ......................................................................................................................... 123
5.4.1 Code table.......................................................................................................................... 123
5.4.2 Usage................................................................................................................................. 124
5.5 R
ECORDING MODE, QUALITY, FPS, HDD TIME TABLE ....................................................... 125
All rights reserved. No part of this publication may be reproduced or transmitted in any form or any means,
electronic or mechanical, including photocopy, recording, or any information storage and retrieval system,
without prior permission.
10
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1. SYSTEM OVERVIEWS
1.1 Safety
Please follow this Please follow instruction to prevent any kind of damage or loss
. If you do not follow this instruction, it might bring severe damage or loss.
The symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
Warning -- This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at its own expense.
Warning – If TIMEKEEPER NVRAM IC that is consist of RTC, SRAM, POWER-FAIL CONTROL
CIRCUIT and BATTERY is replaced, the replacement is to be done by a trained technician with the
same type of component.
Caution -- Any changes or modifications in construction of this device which are not expressly
WARNING
11
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Warranty will be made void if the product is disassembled or manipulated by the user.
Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
12
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.2 Components & Option
The following items are included with the 4, 8 & 16 Channel DVR. Please be certain that all items are
included as soon as you open the box:
1.2.1 Components
z DVR (CD-RW is installed as a basic equipment)
z Power cable
z DSUB-15 connector(2EA) for PTZ /AUX / ALARM (4ch DVR, 1EA)
z Quick Manual
z Software CD (RAMS, UniPlayer, Quick Installer and Operation Manual)
1.2.2 Options
z Remote Control Unit (two batteries included)
z RS-232 Serial cross cable
13
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.3 Features & specifications
Features
z 4/8/16 channel Embedded Digital Video Recorder
z MPEG-4 compression
z Multi channel Playback function
z Quad-plex mode for simultaneous recording, playback, backup, and networking
z Live remote viewing, on-the-fly recording, and control over the network
z Dynamic IP support (DHCP & PPPoE)
z Alarm triggered FTP and E-mail alert function
z Motion detection, Video loss, Motion, Sensor, Motion & Sensor, alarm function
z User defined setting for recording frame rate & resolution
z Various backup method support (CD-RW, USB, Network)
z Audio recording available
z Multiple recording modes: Time lapse, video loss alarm, schedule, manual, & continuous
recording
z Still image capture and search function
z Intuitive and easy search by calendar
z Convenient search by alarm, time, or date
z Quick and responsive playback & field-by-field viewing with the Jog/Shuttle dial
z Watermarking (Backup)
z PTZ control through RS-485
z Quick & easy setup through RS-232
z Remote controller available (optional)
z User friendly remote control unit
z Dual video modes: Selectable NTSC & PAL
z Rack mountable : 2U
z Free voltage power input (100 - 240VAC, 50Hz/60Hz, 70W)
z Various Video output (CVBS 2 EA out, VGA out, Spot out, S-Video out)
14
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.3.1 Specifications
Model 4ch DVR 8ch DVR 16ch DVR
Image System NTSC, PAL selectable
Multi-tasking Quadplex
Video Channel
4CH Composite, 4CH Loop
through, BNC
8CH Composite, 8CH Loop
through, BNC
16CH Composite, 16CH Loop
through(Option), BNC
Video Output
1CH Composite BNC, 1CH
S-Video,
1CH VGA(Option)
2CH Composite BNC, 1CH S-Video, 1CH Spot,
1CH VGA
Video Compression MPEG-4
Recording
Resolution
MUX 720x240, 360x240 (NTSC) / 720x288, 360x288 (PAL)
Recording Quality 4 Levels (Normal, Enhanced, Fine, Super Fine)
Max Display Speed 120 fps (real time) 240 fps (real time) 480 fps (real time)
Max Recording Speed 120 fps (real time)
Time Laps Recording
Interval (fps)
1,2,3,4,5,6,7,8,9,10,15,20,30 (NTSC, 13 Steps)
1,2,3,4,5,6,7,8,9,10,15,20,25 (PAL, 13 Steps)
Recording Mode Schedule, Event (Sensor, Motion Detection), Manual, Continuous
Playback Search Date/Time, Event (Sensor, Motion Detection)
Playback Speed x1, x2, x4, x8, x16, x32, x64, x128, Field by Field (Forward, Backward)
Slow Motion x1/4, x1/2 (Forward Only)
Sensor Input 4 (NO/NC Selectable) 8 (NO/NC Selectable) 16 (NO/NC Selectable)
Alarm Output 1 (NO/NC)
Aux Control In/Out
2 input / 3 output (Selectable Function Menu)
Alarm Reset In, Record Start In, Record ON/OFF In, Alarm Out, Error Out , Record Start Out,
Disk Full Out, Record Status Out
Audio 1CH, Mono
Network 10Base-T (Static, DHCP, PPPoE, E-mail & FTP)
Motion Detection 12x12, 8 Level Sensitivity
Hard Disk Max. 1 EA Max. 2 EA
Backup USB, CD-RW, Network
Watermarking Still Image Backup
PTZ Control RS-485
System Log
Video Loss, Power On/Off, HDD Full, HDD Fail, Menu Called, Reset HDD Format, Reset SW
Upgrade, Email Fail, FTP Fail
Language Korean, English, Japanese, French, Spanish, German
S/W Upgrade Network, USB Memory Stick
Password Function Power OFF, MENU, Record OFF, Key Lock
Digital Zoom x 2
Timer Built-in Real time clock
Remote Control Optional
Power Source Free Voltage (100 240VAC, 50Hz/60Hz, 70W)
Dimension 433(W) x 385(D) x 88(H)
Operating Temperature 5 ~ 40
Weight 7Kg (net)
z Design and specifications are subjected to change without notice.
15
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.4 Name, function & connections
1.4.1 Front view
DOWN
UP
MENU SH-HD
MULTI
PTZPTZ
SEQ
6/145/13
7/15
FULL
HDD
ALARM
FULL
HDD
ALARM
8/16
1/9
3/11
POWERPOWER
RECREC
2/10
4/12
LOCK
FRZ
ZOOM
SEARCH
PTZ
LEFT
PAUSE
RIGHT
REW
FF
STOP
R.PLAY
REC
PLAY
OK
< 16ch DVR >
RIGHT
SH-HDMENU
SEQMULTI
PTZPTZ
DOWN
LOCK
ZOOM
FRZ
87
FULL
HDD
FULL
HDD
ALARMALARM
65
4
2
3
1
REC
POWERPOWER
REC
LEFT
PTZ
SEARCH
UP
PAUSE
REW
R.PLAY
STOP
FF
PLAY
REC
OK
< 8ch DVR >
UP
DOWN
MENU SH-HD
PTZ
POWER
ALARM
HDD
FULL
REC
4
2
SEQ
3
1
MULTI
LOCK
FRZ
ZOOM
SEARCH
PTZ
LEFT
PAUSE
RIGHT
REW
FF
REC
PLAY
STOP
R.PLAY
OK
< 4ch DVR >
16
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Description:
1. CD-RW
z Easy backup by CD-RW is available. The cover of CD-RW shows an excellent design.
2. LED Display
z POWER : During Standby mode, red light on, during running unit, green light on
z REC : During recording green light flashes
z ALARM: Green light (Alarm triggered)
z HDD FULL: Green light (No more disk space for recording)
z PTZ: Pan, Tilt, Zoom, Focus status is indicated by Green
3. Numeric button - Live Viewing mode button
z 16ch DVR : 1/9, 2/10, 3/11, 4/12, 5/13, 6/14, 7/15, 8/16
- Channel selection for Live Viewing and Playback mode, Password inputting,
- Channel selection by pushing the button 1 & 9, 2 &10, …
z 8ch DVR : 1, 2, 3, 4, 5, 6, 7, 8
- Channel selection for Live Viewing and Playback mode, Password inputting.
z 4ch DVR : 1,2,3,4 : It can be used for channel & password change.
z MULTI (16ch DVR) : Selection button for Screen Division for Live Viewing mode
* Live mode: Selection of Screen Division for Live Viewing mode
(4, 8, 9, 16 screen division)
- In order to go back to previous mode, user is required to push “MULTI” button,
after selecting a specific channel.
* Playback mode : Selection button for Screen Division for playback of recording file.
It shows 4,9,16 divided screen in order of precedence. If you select specific one channel
and in order to get back to each divided channel, you can just click “MULTI” button.
z MULTI (8ch DVR)
* Live mode: Selection button for Screen Division for of Screen Division for Live Viewing
mode (4, 6, 8, 9 screen divisions)
- In order to go back to previous mode, user is required to push “MULTI” button,
after selecting a specific channel .
z Playback mode:
- In order to go back to previous mode, user is required to push “MULTI” button,
after selecting a specific channel.
z SEQ(16ch DVR)
: Sequential view under live mode. Viewing of all active video input channels sequentially.
If you click “SEQ” button one time, each single channel can be viewed sequentially.
If you double click “SEQ” , it views 4, 8, 9, 16 screen divisions.
17
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
This button also can be used for all motions area release purpose on motion detection
set up menu.
z SEQ(8ch DVR)
: Sequential view under live mode. Viewing of all active video input channels sequentially.
If you click “SEQ” button one time, each single channel can be viewed sequentially.
If you double click “SEQ” , it views 4, 8, 9 screen divisions.
This button also can be used for all motions area release purpose on motion detection
set up menu.
z SEQ(4ch DVR)
: Sequential view under live mode. Viewing of all active video input channels sequentially.
If you click “SEQ” button one time, each single channel can be viewed sequentially.
If you double click “SEQ” , it views 4 screen divisions.
This button also can be used for all motions area release purpose on motion detection
set up menu.
4. Function Button
z POWER: Press this button to power on/off.
- Soft Power method is adapted. Therefore, If Power button is pressed,
user is asked to input Password, before Power off.
z LOCK: Press this button to lock/unlock the buttons of DVR, in order to prevent the use by
Unapproved user.
- If the “LOCK” button is pressed, DVR is locked, and it’s unlocked by inputting correct
password
z ZOOM: Zoom In/Out on the images during Live Viewing.
z FRZ : Freeze.
- Press button once to freeze the frame at live mode. Press again to return.
- To take a still image capture at playback mode.
- Exchange of video input type : Press power button with “FRZ” button from NTSC to PAL
or PAL to NTSC.
z MISC/SH: Miscellaneous functions or Shuttle Hold.
- MISC: To substitute for the buttons that are placed on the remote control but that are
not placed on the keypad (NET, OSD, Audio Mute, HDD, LOG).
(If the button is pressed, windows appear, and user can select lower menu one by one)
- SH: Press button while using the Shuttle to hold the speed.
z SEARCH : Press once to open the menu to search for recorded files.
z PTZ: Pan/Tilt/Zoom. Press once to access the Pan/Tilt/Zoom/Focus control mode.
Press again to exit.
18
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z MENU: Press button to access Main Menu. Press again to return.
5. Direction/select button
z UP: Used to move the cursor up; change possible values in the setup menu; under
PTZ control sub menu, used to move camera; or used to adjust focus.
z DOWN: Used to move the cursor up; change possible values in the setup menu; under
PTZ control sub menu, used to move camera; or used to adjust focus.
z LEFT: Used to change possible values in the setup menu. Under PTZ control menu,
used to move the camera left or used to do Zoom Out; At playback mode, used to
decrease playback speed.
z RIGHT: Used to change possible values in the setup menu. Under PTZ control menu,
used to move the camera left or used to do Zoom In; At playback mode, used to
increase playback speed.
z OK: Used as a selection key. Under PTZ control menu, used to be interchanged P/T
mode with Z/F mode
6. Jog/Shuttle
z Shuttle: Multi-speed forward/reverse playback. Under Network Setup sub menu,
used to input parameters fast.
z Jog: Frame by frame search.
7. IR receiver
z Remote control signal receiver
8. Playback
z RECORD: Press once to begin recording all active channels. Press again to end recording.
z R-PLAY: Reverse Playback. Press to begin reverse playback. Under PTZ control menu,
used to decrease the speed of Pan, Tilt, Zoom, Focus.
z STOP: Stop playback.
z PLAY: Access to playback.
- Playback button will activate assigned starting position and Channel at playback setup of
menu.
- At pause mode, it will release pause mode.
- Under PTZ control menu, used to increase the speed of Pan, Tilt, Zoom, Focus.
9. USB connector in the front panel
z This connector is for USB Memory stick to back up the image
19
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.4.2 Rear panel view
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
OUT
IN
< 16ch DVR >
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
OUT
IN
< 8ch DVR >
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
IN
OUT
< 4ch DVR >
20
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Description:
1. USB
z Connect USB flash drives for backing up stored video files (8/16ch DVR only)
2. ETHERNET
z Network terminal for 10Base-T (RJ-45)
3. PTZ/AUX/ALARM
z Terminal for PTZ, sensor, alarm, and AUX IN/OUT (DB-15 Male Connector)
(4ch DVR has one only.)
4. VGA and SERIAL
z VGA : Terminal for VGA video output (DB-15 Male Connector, 4ch DVR has an option
on this)
z Serial terminal for RS-232C (PC) for console or quick installation (DB-9 Male Connector)
5. AUDIO
z IN: Audio line input
z OUT: Audio line output
6. VIDEO OUT
z Terminals for composite video and s-video to connect with monitor
7. CAMERA
z 16ch DVR: 16 Inputs ( 1~16 ch) : In order to use Loop through, please refer to Article 3.1.7.
z 8ch DVR: 8 Inputs ( 1 ~ 8 ch) : With 8 loop through, the video of each channel can be out.
z 4ch DVR: 4 Inputs( 1~ 4 ch) : One port which is below to Video output port is loop through.
It can transmit each channel’s video inputs to other DVR.
8. VIDEO OUT (SPOT and VIDEO 2), 8/16ch DVR only.
z SPOT : User can use this connector for a specific Spot Monitor.
z VIDEO 2 : With the Extra Output, user can connector with other monitor.
(Same video image as Video 1)
9. FAN
z Heat protection fan to reduce heat in the unit.
10. POWER INPUT
z Power cord terminal (Free voltage, 100 - 240VAC, 50Hz/60Hz)
21
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.4.3 Remote controller function
POWER : button for power on/off. (DVR should be standby or on working status)
RECORD : button for forced recording (If it’s pressed again, recording stops)
INFO BUTTON GROUP : button group for HDD, NET, LOG, INFO.
If each button is pressed, the relative information shows and press Menu button for exit
LOCK : Remote control lock button. Same function as Lock button in the front panel.
To unlock, press any button and input password.
SEARCH : button to search data in HDD. Press the button to enter, and repress for exit
22
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Up/down, Right/left & OK button
Status OK Up/down Right/left
Menu Selection, sub menu Menu move x
Sub Menu Selection Move Menu Adjust value
Play x
Channel
Coverting
Low speed and playback speed
DVR : Reserved.
MENU : Button for menu. Various sub menu can be selected
- To exit, press again the button
Functional Key Group : A group for “PTZ”, “FRZ”, “ZOOM” “OSD” from the left. Remote
control, Rock button. Same function as Lock button in the front panel.
Play Group: Playback, Start, Stop, Pause, R.Play. All buttons are the same as front panel.
AUX : Reserved
MUTE : - Press one time : Off audio output .
- Press 2
nd
time : on audio output
Number Keypad : button for specific channel you want to see
Ex) If you put the number “7” and “OK” button , it will show channel number 7.
SEQ : The same function as on the DVR front panel.
MULTI : The same function as on the DVR front panel.
16
Screen division Group : Similar with “MULTI” Key but these keys play nothing , so makes it
possible to move back related divided screen . From the left it provides , 4 divided screen,
8 divided screen , 9 divided screen and 16 divided screen.
23
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.5 INSTALLATION
1.5.1 Installation and connection
LOCK
DOWN
UP
MENU
FRZ
ZOOM
SH-HD
SEARCH
PTZ
LEFT RIGHT
REW
STOP
R.PLAY
FF
REC
PLAY
PAUSE
6/145/13
7/15
FULL
HDD
ALARM
FULL
HDD
ALARM
MULTI
PTZPTZ
8/16
SEQ
1/9
3/11
POWERPOWER
RECREC
2/10
4/12
LOCK
DOWN
UP
MENU
FRZ
ZOOM
SH-HD
SEARCH
PTZ
LEFT RIGHT
REW
STOP
R.PLAY
FF
REC
PLAY
PAUSE
6/145/13
7/15
FULL
HDD
ALARM
FULL
HDD
ALARM
MULTI
PTZPTZ
8/16
SEQ
1/9
3/11
POWERPOWER
RECREC
2/10
4/12
LOCK
DOWN
UP
MENU
FRZ
ZOOM
SH-HD
SEARCH
PTZ
LEFT RIGHT
REW
STOP
R.PLAY
FF
REC
PLAY
PAUSE
6/145/13
7/15
FULL
HDD
ALARM
FULL
HDD
ALARM
MULTI
PTZPT Z
8/16
SEQ
1/9
3/11
POWERPOWER
RECREC
2/10
4/12
24
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.5.1.1 Camera
16 Channel(16ch DVR): The unit
comes with 16 video IN for up to 16
cameras connection. In order to use
Loop-Through, please enter into
DVR setting menu and set up
Termination (through Y-cable or T
terminal).
8 Channel(8ch DVR) : 8 cameras
can be connected.
The below video connectors are for
Loop through.
4Channel(4ch DVR) : 4cameras can be connected.
The below video connectors are for Loop through
1.5.1.2 Video Out
8/16ch DVR has two composite video outputs, one S-video output, one VGA output.
Also one spot output allows users to select specific channel for special monitoring.
Spot monitor function is added in order to monitor more important site or channel
4ch DVR has one composite video output, one S-video output. VGA output is
option.
25
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.5.1.3 Audio
Use IN for a Line input and OUT for speaker output.
1.5.1.4 RS-232
Use this connector to connect RS-232 cable to the serial port on your PC to control
the DVR or to perform Quick Installation.
1.5.1.5 PTZ/AUX/ALARM
1.5.1.5.1 RS-485+, RS-485-
DVR uses RS-485 protocol to control PTZ Receiver, Speed Dome, and
Auto-focus camera. Be sure to match the polarity.
1.5.1.5.2 AUX 1~5
AUX Port consists of 2 input ports (AUX 1,2) and 3 output ports (AUX 3, 4,
5) and the function of each port is selectable according to user’s purpose,
user’s access to external DVR, or controllers using the supplied DB-15
connector.
1.5.1.5.3 Alarm Out (NO, COM, NC)
The Alarm output is activated using a relay contact point when an alarm event occurs for the
duration of the alarm event.
Select from Normal Open Relay or Normal Close Relay.
N.O. (Normal Open) is disconnected from COM during normal status and connected to COM
during alarm event. N.C. (Normal Close) is connected from COM during normal status and
disconnected to COM during alarm event.
IN
OUT
26
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
1.5.1.5.4 Sensor (16ch DVR :1~16, 8ch DVR:1~8, 4ch DVR:1~4)
Users can connect up to four N.O./N.C. type sensors(4 for 4ch DVR, 8 for 8ch DVR, 16 for
16ch DVR) and configure them within Main Menu, Sensor Setting.
1.5.1.6 Network
Support 10 base-T Ethernet, and connect Ethernet cable.
1.5.1.7 USB flash memory
Perform backup of recorded video files from DVR system to USB flash memory manually.
27
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
2. Basic operation procedures
2.1 Power On/Off
2.1.1 Power ON
Using either the keypad or the remote control, press the “POWER” button. (Note: In case of
power outage or rare instance of system failure, the DVR will reboot automatically)
The Power LED light will turn from red to green when it has turned on properly.
In a standby mode, the LED is red.
2.1.2 Power OFF
In order to shutdown the system, you must type in the password. The default password for
shutdown is “111111”.
2.2 Date & time setting
Set the date and time for the DVR.
(System Setup in Main Menu Æ Time/Date)
2.3 Change of live video channel in multi channel screen
Live channel can be changed in Multi channel screen of DVR.
This function is available for 4 ch / 6 ch / 8 ch / 9 ch of multi channel screen. It’s not available
for 16 ch. If OK key is pressed in the multi channel screen, box appears. Buttons are used to
select the channel.
And up/down key is used to move the channel.
After setting, if menu key is pressed, user can go back to Live picture.
2.4 Password setting procedure
Change your password for the DVR. The password must be a 6-digit combined number
consisting of numbers 1 ~ 8.
(System Setup in Main Menu Æ System Password)
28
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
2.5 Network setting
There are three types of network setting for the DVR: STATIC, DHCP, or PPPoE. Please
set the network type. (Network Setup in Main Menu)
2.6 Recording
Select recording related parameters in the Record Setup in the main menu.
2.6.1 Recording types
Enter in Recording setup of menu. For resolution, select either 720*240 (NTSC), 360*240
(NTSC) or 720*288 (PAL), 360*288 (PAL). Audio channel is synchronized with the selected
video signal. Select Video input quality (Enhance/ Normal/ Fine/ Super fine), Frame rate (120
fps(NTSC) / 100 fps (PAL)), and recording mode. 4, 8 or 16 channels can be selected at the
same time.
2.6.2 Recording modes
Recording mode are made up of MANUAL, CONTINUOUS, MOTION, SENSOR,
MOTION+SENSOR, and SCHEDULE mode. A red record light ( ) on the top LEFT corner of
each channel will indicate DVR recording.
In the MANUAL mode, the DVR starts to record on/off whenever the RECORD button is pressed.
Refer to the article 3.2.6 for details of Record mode.
2.7 Playback
2.7.1 Press the Play button
When you push " Play" button, playback will begun according to channel, playback beginning
point and audio of playback setting mode.
2.7.2 Audio Play
You will hear audio when video files containing audio is selected for playback.
2.8 Search
2.8.1 Search mode
The DVR has 3 types of search modes:
z Search by Calendar: For user’s convenience, we provide calendar type search mode.
z Search by Event: Search the recording file according to sensor, motion, schedule.
z Still Image Search: Displays recorded still images.
29
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
2.8.2 Search method
z Calendar Search
When you press Search, select from three options listed:
Among these three options, select calendar mode.(Click “OK” button)
Then “Year, Month, Date” will be shown on the screen , when you click each one, hour and
minute column will be shown accordingly. Then you can view all selected recorded file at the
same time.
z Event Search
When you press Search, select Event Search from three options listed. Select Date and Time
and Channel and you can find recording file list. Please click” OK” button to playback.
2.9 Backup
The DVR has various types of backup methods:
2.9.1 CD-RW
z After inserting CD-ROM into CR-RW Drive, push Menu button & go to Backup menu, and
back up the moving picture of HDD by CD-RW for the selected time.
z In the backup menu, select backup time
Æ start backup, and backup for capacity of CD-RW.
z The backed-up files can be play-backed by our own provided Uniplayer or Simple Player S/W
program.
2.9.2 USB flash memory Stick
z User can backup manually from internal HDD to USB memory stick by connecting one to
USB port equipped at rear side of DVR
z Connect USB Memory Stick into USB port Æ Input the start of backup date and time at
backup menu Æ Input the end of backup date and time at backup menu Æ Select the
channel Æ Select event condition.
z Video data & still image are available in the USB back up.
z Our own Simple Player included during back up, it is easy to playback at other P.C
z User can replay backup files at proprietary UniPlayer client program.
2.9.3 Network
z from the remote site it will be backed up to user’s P.C
30
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
2.10 Client Program
2.10.1 RAMS (Remote Access & Monitoring System)
z Remotely access, monitor, and operate the DVR for real-time live viewing, playback, backup,
on-the-fly recording, and control over the LAN/WAN
z Upgrade the S/W(Kernel, Ramdisk) of DVR
z Install the RAMS program as referred to in section 4.2 of Operation Manual.
z Execute RAMS program and register selected DVR’s IP address & Port number from the DVR
list by clicking following button
.
z After selecting the target DVR, enter “admin” for ID and “111111” for default password. This
will enable you to access the DVR.
2.10.2 UniPlayer
z A viewer program with functions for recording, capturing, & backing up files.
2.10.3 Quick Installer
z To setup configuration template for quick & easy, multiple unit setup using RS-232 or network
z To upload/download DVR menu setting from/to DVR as file form using pc.
31
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3 Main Menu screen
Figure. 3-1 Main Setup screen
3.1 Camera Setup menu
Figure. 3-2 Camera setup screen
32
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.1.1 Channel
A user can select targeted camera. After setting this, live viewing picture will be changed to
selected channel automatically.
3.1.2 Camera Name
Figure. 3-3 Camera name edit screen
User can edit camera name indicated button part of each channel. as explained paragraph
3.1.1. According to above picture 3-3, after keyboard type’s window which is enterable or
editable as displayed, user can set channel name with entering new letters and it is available
12 letters at maximum. Selected name at this paragraph will be displayed at the left side of
top portion on window.
“CAPS” button: user can shift a letter to capital one and/or inversion.
◀ㅡ” button: user can delete miss-entered characters .
“OK” button: entered name will be applied after that and revert to previous menu.
“Cancel” button, entered name will be discharged and maintain the present name & reverted
to prior menu.
33
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Key Explanation
Direction Key Move the button
OK Click selected button
0~9 Figures Input Figures
SEQ ‘.’ Input
MULTI Capital letter & Small letter(CAPS)
PLAY() Input Space
R.PLAY() Input back space
MENU Move to “OK” Button
Meaning of Key
3.1.3 Camera hide
User can make the live screen appear or not by channel with this function.
If user sets up “ON” in this function, the live screen of the selected channel does not appear.
In case of recording, the recording continues, although screen does not appear.
3.1.4 Picture Setting
Figure. 3-4 4 Picture setting screen
34
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.1.4.1 Contrast, Brightness, Hue,
Contrast, Brightness, Hue will be managed & each parameter has 16 level steps adjustable.
3.1.4.2 Default
Users can restore the factory default setting of Contrast, Brightness & Hue.
Confirmation box on picture setting default will appear after entering default. User can
restore the factory default setting after entering ‘YES’ key button.
Figure. 3-5 Confirmation box on Picture Setting Default
3.1.5 PTZ setup
Figure. 3-6 PTZ setup screen
35
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
It sets PTZ protocol of targeted channel in the Camera Setup. (Please refer to paragraph
3.1.1 for channel selection)
3.1.5.1 Model No
Select the PTZ model or choose “NONE”.
3.1.5.2 PTZ ID
Set the PTZ ID: 0 ~ 255
The PTZ ID must match the ID number that has been set by the PTZ Controller. Please
verify the ID on the Controller first before setting the PTZ ID.
3.1.5.3 Reverse Control
Without any further changing of cable connection, user can control PTZ controller by
changing reverse direction of PTZ. Each PAN, TILT, ZOOM, FOCUS will be selectable to
reverse direction and each parameter will be selectable ON /OFF.
3.1.5.4 RS-485 Setting
Choose from the following to set PTZ RS-485 baud rate: 2400, 4800, 9600, 19200, 38400,
57600, 115200 bps.
3.1.5.5 TEST
Users can test the PTZ control after setting the parameters. After clicking the TEST button,
PTZ control will be available and tested by up/down key. Pan/tilt and Zoom/Focus mode will
be controlled after entering OK key button.
PTZ control speed will be controlled by PLAY button for higher speed or by R.PLAY button
for precision control
Users can access prior menu with PTZ key entering after finishing test.
3.1.5.6 Additional PTZ Menus
Users can access additional PTZ menu after pressing Menu button in the PTZ mode.
36
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-7 Additional PTZ Menu
- Go to Preset : To move the Pan/Tilt drive to the position preset in Set Preset mode.
Preset numbers are selected by Left/Right buttons and the Pan/Tilt drive
moves to the preset position after pressing OK button.
- Set Preset : To preset the position of the Pan/Tilt drive. Users can preset 1-99 positions
selected by Left/Right buttons and save the preset by pressing OK button.
- Iris : To open/close the camera lris by Left/Right buttons.
- Light : To turn on/off the camera lighting selected by Left/Right and OK buttons.
- Camera : To turn on/off the camera itself selected by Left/Right and OK buttons.
- Aux : To turn on/off the AUX (six) connected to the camera. On/off are selected
by Left/Right and OK buttons.
- Auto Pan : To automatically pan the camera. Pan speed are selected by Left/Right and
OK buttons.
- Auto Iris : To automatically Iris the camera.
3.1.6 Spot
It is a spot monitor output channel and it designates specific channel user want to see.
Ref.1.4.2.
3.1.7 Sequence Time
It decides the viewing time of each channel during sequence mode at live mode.
2, 4, 5, 8, 10, 15, 30 sec are all selectable.
37
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.1.8 Loop Through Setup
Set up Loop Through function. Set up is available with 75 or high each channel.
3.2 Record Setup menu
Figure. 3-8 Record setup screen
3.2.1 Resolution
Resolution for NTSC is “360 x 240” or “720 x 240”. PAL is “360 x 288” or “720 x 288”
selectable and selected resolution will be applicable to all channels simultaneously.
3.2.2 Audio Sync
As audio input port is one channel available, user should synchronize audio signal with
targeted video signal. With synchronized channel will record audio as well as video. But
others will only record video input signal only.
3.2.3 Channel number
Quality, frame rate, record conditions will be selected per channel. So users can choose
targeted channel. All means all of channels.
3.2.4 Quality
Recording quality of each channel will be selectable & Normal, Enhanced, Fine, Super Fine
4 steps are available now.
3.2.5 Frame rate
User select channel’s recording frame rate and none (no recording), 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 15, 20, 30(25) fps will be available. The total for all the cannels is max 120 fps(100 fps)
38
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
But, with 720 x 240 (NTSC), 720x288 (PAL) resolution, user should not set to exceed
60(NTSC), 50(PAL) frame per second with accumulated total channel recording.
3.2.6 Record mode
User will choose recording mode channel by channel and selectable parameters and
meaning are below.
z Manual: Manual recording function that starts record and/or stop recording manually by
pushing REC key on remote controller or on front key.
z Continuous: Continuous recording mode that starts to recording automatically after turning
on the systems.
z Motion: Start to record under motion detection. Under Motion, it starts pre-alarm recording
around 2 or 3 second and maintains it until no of motion event. Post-alarm recording will
be controlled at Post alarm recording time on Event Setup Menu. (Refer to paragraph
3.3.4)
z Sensor: Start to record under sensor input. As same as motion mode, it starts pre alarm
recording around 2 or 3 second and maintain it until no of sensor input. Post-alarm
recording will be controlled at Post alarm recording time on Event Setup Menu. (Refer to
paragraph 3.3.4)
z Motion + Sensor: Start to recording under motion detection or Sensor occurrence. The
detailed will be referred to previous motion detection & sensor occurrence.
z Schedule: This mode supply user defined time and date schedule recording in advance
detailed recording schedule will be referred to paragraph 3.2.7 record schedule.
39
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.2.7 Record Schedule Setup
Figure. 3-9 Recording schedule setting screen
User can select to set recording schedule targeted date, time based week & 24Hours.
Move the cursor to the desired position of time by pressing up/down key and set the
recording mode at the desired position of time by pressing the OK button with referring to the
Help Message per Record Mode on the right position. After the setup, store the set schedule
and exit to the top menu by pressing the Menu button.
40
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3 Event Setup Menu
Figure. 3-10 Event Setup screen
3.3.1 Motion Detection Setting
Figure. 3-11 Motion Detecting Setup screen
Sets up the motion detecting area and sensitivity.
41
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.1.1 Channel
Sets up the motion detecting area and sensitivity for each channel.
3.3.1.2 Sensitivity
Sets up the motion detecting sensitivity. The lower the sensitivity gets the closer to the left
the red bar gets.
3.3.1.3 Detection Zone
Figure. 3-12 Motion Detecting Area Setup screen
Selects the motion detecting area. The sky blue square implies the current cursor and the
yellow square implies the area that was already selected as the motion detecting area.
When the cursor positions on the area that was selected as the motion detecting area, it
turns green.
Full screen shall be as the motion detecting areas after entering “MULTI” button. The reverse
key button is “SEQ” erasing motion detecting area.
42
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.2 Sensor Setting
Figure. 3-13 Sensor Setting screen
3.3.2.1 Sensor Type
N.O.: Normal Open. Operation mode for the installed sensor’s contact point is usually open
in normal condition and changed from open to close at sensor’s detect event.
N.C.: Normal Close. Operation mode for the installed sensor’s contact point is usually close
in normal condition and changed from close to open at sensor’s detect event.
3.3.2.2 Channel Link
Assign sensors to designated Camera Channels.
43
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.3 Alarm input/ Output
Figure. 3-14 Alarm Output Setting
3.3.3.1 Sensor
Configure the alarm out on/off activated by the sensor.
3.3.3.2 Motion
Configure the alarm out on/off triggered by the motion detection.
3.3.3.3 Relay Time
Configure the alarm duration time. It can be set up from 0 second to 60 seconds in the unit of
5 seconds.
3.3.4 Post Alarm Record Time
Configure the recording continuation time after starting an event recording. It can be set up
from 10 seconds to 60 seconds in the unit of 10 seconds.
44
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.5 FTP Setting
Figure. 3-15 FTP Setting
Enables the unit to transmit an assigned FTP Length of Motion picture to an FTP Server over
network when an event occurs. The event will be transmitted 15 seconds after the event
occurs.
3.3.5.1 FTP Server IP address
If you click ftp address , key board shaped will turn on the screen.
Put the suitable server address (ref.3.6.4.6(STATIC) & 3.6.6.4(PPPoE))
If you want Domain name instead of IP address under PPPoE, STATIC , a suitable DNS
server address should be at the network setting menu.
45
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.5.2 ID
Configure the FTP ID. The ID can contain maximum of 31 characters.
Figure. 3-16 FTP ID
3.3.5.3 Password
Configure the FTP password. The password can contain maximum of 12 characters.
Figure. 3-17 FTP Password input
46
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.5.4 Target Path
Configure the path to transmit to an FTP server. The path can contain maximum of 31
characters.
Figure. 3-18 FTP Target Path
3.3.5.5 FTP Length of Image (second)
Select FTP length of image by second (5 to 10 seconds are selectable)
to transmit image files for selected seconds.
3.3.6 FTP Trigger Setting
Selects on/off for transmitting the video file to FTP for each channel.
47
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-19 FTP Trigger Setting
3.3.6.1 Sensor
Configure sensor events.
3.3.6.2 Motion
Configure motion events.
3.3.7 E-Mail Address Setting
Transmits the content of an event log periodically through e-mail. Configure up to four e-mail
address to transmit under event status simultaneously.
You can set up to 4 person’s addresses and e-mails will be sent to all of these four at one
time. The e-mail address can contain maximum of 31 characters, and the event logs
transmitted through e-mail will be deleted in the DVR unit.
48
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-20 E-Mail Address setting
3.3.8 E-Mail Setting
Figure. 3-21 E-Mail Setting
3.3.8.1 Send (Period)
Configure the e-mail transmitting cycle. It does not transmit when it is set to NO. The setting
time can be set up at the units of within 2 minutes after event, 30minutes, 1, 2, 5, 12, 24
hours.
49
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.3.8.2 Prohibition setting
Set up prohibition time to transmit the e-mail. Users can enter prohibition time from the
starting time and the ending time of transmitting the e-mail
3.3.8.3 SMTP Server IP address
If you click ftp address , key board shaped will turn on the screen.
Put the suitable server address (ref.3.6.4.6(STATIC)& 3.6.6.4(PPPoE))
If you want Domain name instead of IP address under PPPoE, STATIC , a suitable DNS
server address should be at the network setting menu.
If you do not know your SMTP server IP address then go to Command Prompt in Windows,
then use ping and SMTP name address eg smtp.yahoo.com as below to get your SMTP IP
address. (Same method also applies to finding FTP server IP address from FTP name
address).
3.3.8.4 Authentication
Users can select authentication process dependent on SMTP server requirement.
Selects on/off for authentication process do authentication process whenever transmitting e-
mail messages through SMTP server.
3.3.9 Event Log
Shows the event log of the selected channel. It can reset periodically by setting e-mail as
described in paragraph 3.3.7.
50
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-22 Event Log Display screen
3.4 Playback Setup
Figure. 3-23 Playback setup screen
3.4.1 Channel
Designate the channel to be viewed when the “PLAY” button is pressed.
3.4.2 Starting Point
This starting point configures the starting position when the “PLAY” button is pressed.
z FIRST: This can search for and replay the oldest recorded images from the selected
channel.
51
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z 30Min/1HOUR/6HOUR/12HOUR/24HOUR AGO: This can search for and replay the
previous recorded images from the selected channel.
3.4.3 Audio
If the recorded files contain audio, choose whether to turn the sound ON/OFF
During playback.
3.5 Display Setup
Figure. 3-24 Display setup screen
Determine whether to have the following be shown on the monitor: Camera name,
Time/Date, HDD status, Borders. Select either ON/OFF for each item.
3.5.1 Menu Transparency
OSD MENU Transparency decision. When it goes to right part, it is not transparent.
3.5.2 VGA Set up
Providing suitable VGA port which is suitable to user’s P.C
52
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.6 Network Setup Menu
Figure. 3-25 Network Setup screen
3.6.1 DDNS setting
Set up DDNS (Dynamic Domain Name System) server address & port number.
Users can set up two DDNS server address and port, for the faster setting jog shuttle can be
used, too.
Figure. 3-26 DDNS setup screen
53
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Under DHCP or PPPoE configuration using IP Router, the DVR will receive an IP address
periodically, and each time, the IP address can be different. Therefore, in order for users to
access the DVR over the network, it must update its IP address to the DDNS Server.
Under IP router configuration, IP of DVR must be setup as static IP address and it must
update its IP address to the DDNS server. Therefore DDNS Link on NETWORK SETUP
menu should be on. (When IP router is connected from static IP, it is no necessary to setup
DDNS link on)
By indicating the address of a DDNS Server, the DVR will update its IP address and its MAC
address periodically. Therefore, when users access the DVR over the network, the same
URL can be used. For example, if the DVR has a MAC address of “00:09:F8:12:34:56” and
the domain name of the DDNS server is “ns.udrdns.net ”, the users can access the DVR with
the URL “u123456.udrdns.net” The DDNS will know which machine to resolve the URL
because it would contain an updated IP address and MAC address list.
The factory default value of the DDNS server address from UNIMO Technology Co, Ltd. is as
follows:
DDNS address 1 : 221.139.14.109
DDNS address 2 : 211.104.85.235
DDNS connection port: 7100
If users wish to operate the DDNS server by themselves, please contact us.
3.6.2 Remote Connection Login Password
There are two levels of access that can be set up in the RAMS program.
- Admin (Highest), User (Normal)
- By default, the password is 111111 when the software is first installed.
Users can use any numeric number from 1~4, combined 6 units.
54
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-27 Remote Connection Login Password screen
3.6.3 Network Type
Choose one type from the following: STATIC, DHCP, & PPPoE.
Static mode uses fixed assigned IP address in the network.
DHCP (Dynamic Host Configuration Protocol) receives an IP address from the DHCP Server,
and it may change according to the lease period.
PPPoE (PPP over Ethernet) mode is used for network using PSTN such as ADSL.
Please refer to paragraph 3.6.3.1, 3.6.3.2, 3.6.3.3 for detailed network type setup process
55
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.6.4 STATIC
Figure. 3-28 STATIC Network setting
3.6.4.1 DDNS Link On/off
You can decide if you want to use Dynamic DNS or not under static network type with
on/off button.
3.6.4.2 Port
Configure the Port number to be used to connect to the DVR system using RAMS (Remote
Access & Monitoring System). The default Port number is port 80. Change easily by using
Jog/shuttle equipped in front panel.
3.6.4.3 IP Address
Assign a fixed IP address to the DVR. Change easily by using Jog/shuttle equipped in front
panel.
3.6.4.4 Subnet Mask
Assign the Subnet Mask. Change easily by using Jog/shuttle equipped in front panel.
3.6.4.5 Gateway
Assign the Gateway address
Change easily by using Jog/shuttle equipped in front panel.
56
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.6.5 DHCP
Figure. 3-29 DHCP setup screen
3.6.5.1 Port
Please refer to paragraph 3.6.4.2 for Port setting of STATIC.
3.6.6 PPPoE
Figure. 3-30 PPPoE setting
57
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.6.6.1 Port
Please refer to the port setting in paragraph 3.6.4.2
3.6.6.2 ID
Type in your user ID for the ADSL account (PPPoE).
The password can contain maximum of 31 characters.
Figure. 3-31 ID input screen
3.6.6.3 Password
Type in your user Password for the ADSL account (PPPoE),
The password can contain maximum of 12 characters.
Figure. 3-32 Password input screen
58
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.6.6.4 DNS IP
Setting DNS address of DVR currently used. You can use jog shuttle or number button at
front panel.
3.6.7 Changing the Network configuration
If users want to change network type of DVR, users must reboot the system. User can
restart the new network mode setting after entering ”YES” key button.
Figure. 3-33 Changing the Network setting screen
3.7 System Setup screen
Figure. 3-34 System Setup screen
59
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.7.1 DVR Name
Type in the name of the DVR you wish to assign. The name can contain maximum of 12
digits.
Figure. 3-35 DVR name screen
Using the arrow, type in the DVR name.
Click “OK” when finished.
60
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.7.2 System Password
Figure. 3-36 System password set up
Set up part for system password, related function and application.
This is a part of installation, actual system password, related function and password
application.
3.7.2.1 Password Setting
To change system password:
First, type-in the current password, confirm. Then if it is correct, type-in the new password
twice. If they match, the password has been changed.
Users can use any numeric number from 1~8, combined 6 units.
Password input screen (present, new, confirm, if it is wrong -twice, confirm to change)
61
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-37 Password input screen
3.7.2.2 Password Apply
Determine whether the system password has to be applied to power On/Off. The applicable
features are recording close, enter menu, system off. Users can set up password ON/OFF
for each feature.
Setting to On, when each feature starts, users have to confirm password for each step.
Setting to Off, users can use any confirmation of password.
3.7.2.3 Auto Key Lock
Possible Setting time is every 30sec, 1 min, 3min, 5min, 10 minutes. If users choose setting
time among them, auto key lock function will start exactly after the setting time and lock key
type icon will be displayed at the bottom of window. Users can access system operation after
release from key lock state by entering right current password..
3.7.3 Time / Date
Users can configure the view of time & date on the system, as well as, Day Light Saving
Time.
62
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-38 Set up Time/Date
3.7.3.1 Set up Time / Date
Set up date and time on the system
3.7.3.2 Time / Date Format
Set up format for date and time. There are two types of time: 24hr circle/ 12hr circle. Date
format can be set up as the following: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY.
3.7.3.3 Day Light Saving Time
Set up Start Day and End Day in Day Light Saving Time mode
For example, if users adopt day light saving time from May 01 to Oct.31, input the dates
accordingly.
3.7.3.3.1 Start date (m/d)
Set up start day in Day Light Saving Time mode.
3.7.3.3.2 End date (m/d)
Set up end date in Day Light Saving Time mode.
3.7.3.3.3 Apply Hour
Configure Day Light Saving Time.
63
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.7.4 Buzzer
Users can turn the buzzer ON/OFF depending on the situations. Usable situation is Sensor,
Motion, & Video Loss. When users activate the buzzer, buzzer will make a sound when there
any event occurs. There would be no sound if the buzzer is turned Off.
Figure. 3-39 Set up buzzer
3.7.5 Language
Six Languages (English, Korean, Japanese, Spanish, French, Germany) are available.
3.7.6 HDD Setup
Set up for Internal HDD and Removable HDD, See the information.
64
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-40 HDD Setup image
3.7.6.1 The number of HDD
Show the HDD quantity that is built –in.
3.7.6.2 Write Mode
Set up writing type in recording.
Types are ‘Once’ and ’Overwrite’. If set up by ‘Once’, HDD can record until the Full state.
If set by ‘Overwrite’, HDD will record continuously by start overwrite oldest data.
3.7.6.3 Forced Deletion( Previous few days)
The images recorded earlier than specific date can be erased by force.
The number of dates for erasure can be selected from 1 ~ 100.
In case that “OFF” is setup, the recorded images shall not be erased,.
In case that “30” is setup, the images recorded 30 days earlier than today shall be erased.
65
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.7.6.4 Hard Disk
3.7.6.4.1 Capacity
Indicate the used part and total capacity of Internal HDD.
Used part of HDD (GB) / Full capacity of HDD (GB)
3.7.6.4.2 Format
This is function for internal HDD formatting and you must reboot the system after this
instruction. Confirmation box on format will appear after entering format key. User can format
and erase all information of HDD, after entering “YES” key button.
Figure. 3-41 Confirmation box for HDD format
Max 2 HDD can be installed. The added HDD works as a HDD, together with first HDD
3.7.7 Aux Port
Set up for Aux Port
Figure. 3-42 Set up AUX port screen
66
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.7.7.1 Active
Set up Active state. Low/High will be different depend on machine..
3.7.7.2 Function
The following list contains a brief description of each function.
3.7.7.2.1 Direction : IN
z UNUSED: Do not use the AUX port.
z ALARM RESET IN: Pause alarm or buzzer when event occurred
z RECORD START IN: Record is on while external signal comes in.
z RECORD ON/OFF: Recording start/stop during user push the button & same as
pushing remote controller or DVR machine
3.7.7.2.2 Direction : OUT
z ALRAM OUT: Notice the assigned port when event occurred
z ERROR OUT: Notice the assigned port when system error occurred
(Mark system error)
z RECORD START OUT: HDD of DVR is full(100%), send signal to DVR
which is connect with AUX port. During receiving recording
signal through AUX port, it can record it and the mode of DVR
AUX in port is RECORD
z DISK FULL: If HDD is full, send signal to the AUX port.
z RECORD STATUS: Indicate whether it is recording or not
3.7.8 Factory Default
All of set-up date of system comes back to Factory default.
Confirmation box on picture setting default will appear after entering default. User can
restore the factory default setting after entering ‘YES’ key button.
Please refer to paragraph 5.3 for factory default.
67
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-43 Confirmation box for Factory Default
3.7.9 Software Upgrade
Users can upgrade the software of Ramdisk and Kernel using the USB flash drive
(thumb drive) by the following steps.
- Get the latest version of software (Ramdisk/Kernel) from distributor
- Copy the downloaded files from the PC to the USB memory.
- Connect the USB memory to the USB port.
- Go to 'System Setup' then 'S/W Upgrade' then select Ramdisk or Kernel to upgrade.
Figure. 3-44 Software Upgrade
68
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
- After the unit recognizes the USB flash drive and upgrading end, the unit will reboot.
Figure. 3-45 Ramdisk Upgrade
3.8 Backup
Backup recording data to CD-RW or USB Flash Drives
Figure. 3-46 Backup screen
3.8.1 Backup Device
Set up the device for backup. USB / CD-RW are available
3.8.2 Start Time
Input the start of backup date and time.
3.8.3 End Time
Input the end of backup date and time.
3.8.4 Channel
Choose the channel to backup.
69
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.8.5 Event
Choose the event to backup. In case of none mode, selected files according to time will be
backed-up.
3.8.6 Backup Start
Based on the input date, time, channel and event & other condition search the images will be
backed-up to the chosen device. Back up progress rate is marked on the bottom right side of
the screen.
3.8.7 Format
This menu is used only when backup device is CD-RW. In case that backup device is CD-
RW, format command has to be done by this menu, before starting backup.
However, with CD-R media, backup can be started without format.
3.9 System Log
It is for displaying major system events.
The items that manage by Log are Video Loss, Power On, Power Off, Menu entry, HDD Full,
failure of FTP transmission, failure of E-mail transmission
Figure. 3-47 System Log
70
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.10 System Information
Figure. 3-48 System Information
3.10.1 Video type
It shows that present Video type of System is NTSC or PAL.
3.10.2 H/W version
It shows the H/W Version of system.
3.10.3 S/W version
It shows the S/W Version of system.
3.10.4 KERNEL version
It shows the S/W Version of KERNEL.
3.10.5 Mac Address
It shows Mac Address of system.
3.10.6 Audio
Shows audio part availability.
3.10.7 Language
Shows supporting language.
71
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.11 Search Menu
When you click ”SEARCH” button below screen will be shown on the screen.
Figure. 3-49 Main Screen of Search
3.11.1 Search by Calendar
Figure. 3-50 Search by Calendar
72
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.11.1.1 Calendar View
When you click specific date and time , it will be showing recorded data as drawing.
3.11.1.2 Drawing Color
Figure. 3-51 Calendar Search Screen
z Red : Enforced Recording
z Green: Motion Event Recording
z Purple: Sensor Event Recording
z White : No Recording
3.11.1.3 Hour( Time)
It is composed of 24hours. Recording status can be distinguished by color. Even though
Your recording mode is Motion plus Sensor mode, but if motion recording is bigger than
Sensor , then the color will be green.
73
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.11.1.4 Display by minutes
If there are some recording on a specific time and channel , it shows suitable color on a
specific minute time zone.
3.11.2 Search of Event
It shows event occurring time.
3.11.2.1 Start time
Key in the time you would search from 1970 to 2037(No more or less than that)
3.11.2.2 Ending Time
Key in the time you would search from 1970 to no more 1970 to 2037.
3.11.2.3 Select the channel
Select the channel you want to look at.
3.11.2.4 Sample of Search
Figure. 3-52 Search Screen of Event
3.11.3 Still Image Search
You do not need to put any channel number, from the oldest data images will be shown. Up to
999 images can be recorded and saved.
74
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.11.3.1 Still Image Search
3-53 Still Image search Screen
3.11.3.2 Still Image USB Back up
Click the specific file and push “PLAY” button , still image will be copied.
3.11.3.3 Converting Still image file into JPG format.
- Execute simpleplay_m4.exe.file
- Open the file to change into jpg
- Click the second disc button of Toolbar menu #2 and save it as jpg or bmp type.
3.12 PLAYBACK
3.12.1 PLAYBACK of recorded Images
This function means that the images recorded in the system are searched by Time or Played
back directly.
3.12.1.1 Method of playback
Move the cursor on searched specific time zone and push “OK” button, then playback will be
begun with audio if you record it together.
75
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.12.1.2 Screen of played back.
Figure. 3-51 Screen of playback
3.12.1.3 Control during play back
3.12.1.3.1 Stop of Play back
If user needs to stop playback, user should press button “STOP”
in the remote controller of in the system, and play back stops and live screen is coming back.
In case of calendar search , “SEARCH“ button let it turn to previous search screen.
3.12.1.3.2 Temporary Stop during Playback
In order to stop temporarily playback, press button “PAUSE”.
If users press the button “PAUSE” again, play back continues.
3.12.1.3.3 Speed level of Play back
There is 7 Speed levels for playback (Normal, Fast mode) in the forward and backward
direction as well.
There is 2 speed levels for slow playback mode in the forward and backward.
If user needs faster speed of playback, users press button “RIGHT” and speed is controlled.
If user needs slower speed of playback, users press button “LEFT” and speed is controlled.
76
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.12.1.3.4 Change of Direction of Playback
There’s forward and Backward directions.
In order to change direction from Forward to Backward, user press the button “REVERSE
PLAY” and backward playback starts with normal speed. On the contrary, to change direction
from Backward to Forward, user press the button “PLAY” and Forward playback starts with
normal speed.
3.12.1.3.5 Select of channel of Playback
This function is to change the other channels during the same time .You can use remote
control to change the other channel. In case of channel # 1 , You can put the channel # 1
button for about 3 seconds or push “OK” button
.
3.12.1.3.6 Audio ON / OFF
In case of recorded image with Audio, user can on or off by using the button “AUDIO MUTE”.
The Icon in the top of screen shows the status (ON / OFF) of AUDIO.
3.12.2 Playback of still image
3.12.2.1 Method of playback
As the paragraph 3.11.2, users put the curser to contents. In the searched still Image Lists,
and press Button “OK”.
The screen of search list disappears and still image is played back as the paragraph 3.11.2.
77
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.12.2.2 Screen of playing back
Figure. 3-52 Still Image of playing back
3.12.2.3 Control during Still Image Play back
3.12.2.3.1 Stop of play back
To stop the playing back, User press button “STOP” or “ SEARCH”.
Playback stops and screen of search list appears.
3.12.2.3.2 Next screen
Press Button “RIGHT” and next screen is played back.
3.12.2.3.3 Previous screen
Press Button “LEFT” and previous screen is played back.
78
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
3.13 Miscellaneous Menu
Figure. 3-53 Miscellaneous Menu
This menu is to use the five functions that are placed only on the remote control but on the
keypad of the unit.
3.13.2 NET
Displays the current network IP and the user connected to the network.
(It substitutes the NET button on the remote control).
79
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Figure. 3-547 Network Information
3.13.3 OSD
Turns on/off the OSD (On Screen Display). It substitutes the OSD button on the remote
control.
3.13.4 Audio Mute
Turns on/off the audio. It substitutes button on the remote control.
3.13.5 HDD
Displays the HDD information. It substitutes the HDD button on the remote control.
3.13.6 LOG
Display the System Log. It substitutes the LOG button on the remote control.
80
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4 Client program
4.1 Overview of DVR
z RAMS_M4 (Remote Access & Monitoring System MPEG4) is used to remotely access,
monitor, and operate the DVR for real-time live viewing, playback, backup, on-the-fly recording,
and control over the LAN/WAN.
z UniPlayer_M4 is a viewer with functions for recording, capturing, & backing up files.
z QuickInstaller_M4 is a setup configuration template for quick & easy, multiple unit setup
using RS-232 or network. It can used to derive setting parameters of DVR system and to save
setting parameters to DVR system. Up to 8 users can access to it at the same time.
4.1.1 PC requirement (minimum)
z Window 98
z DirectX 8.0
z Explorer 5.0
z VGA Card for over 2 x AGP
z Video card memory 64MB memory (the latest graphic cared driver)
z Resolution 1024 x 768
4.2 Installation & execution of program
z Please use DirectX 8.0 or newer.
- http://www.microsoft.com/windows/directx/default.aspx - English
- http://www.microsoft.com/korea/directx/default.aspx - Korean
z To ensure optimal performance, install the latest graphics driver.
z Install DVR by clicking on the DVR_MPEG4_Verx.x_Setup.exe file.
z Rams_M4.exe, Uniplayer_M4.exe, QuickInstaller_M4.exe icons will be placed on the desktop
after a successful installation.
81
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3 RAMS_M4 (Remote Access & Monitoring System Mpeg4)
4.3.1 Screen and button
Screen capture button, Video record button
Screen display
Channel display button, Sound control button
If logo is clicked, program version window appears.
Time indicator
PC HDD information indicator
Live or Playback mode indicator
Connected DVR information indicator
PTZF Speed, Preset
Pan/Tilt, Zoom/Focus button
DVR Connect button, UniPlayer_M4 link button, Full Screen button, Parameter setting button,
DVR recording button, DVR search & playback button, DVR retrieve & backup button,
DVR Setting button
Minimizing button
Close program
82
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.2 Connecting to DVR
Click icon to open the DVR list.
This box allows the user to select the IP address assigned to the selected unit. This is
required for making a network connection.
To create a new IP address & DVR selection, enter the DVR name, DVR address, and
port number.
To Click to add the newly entered DVR information into the DVR list
After selecting a DVR Name from the list and making changes, click Modify to update the
changes made to the item.
To remove an IP address/DVR Name , click and highlight the desired name, then press
the Delete button to remove.
Enter the correct password for either Admin or User for the target DVR.
Click Close to exit the DVR List
Click Connect after correct password has been entered to connect to the desired DVR.
83
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.3 UniPlayer_M4 link
If you click this button on main menu, UniPlayer_M4 program will be executed.
Regarding the UniPlayer_M4 program, please refer to the article 4.3
4.3.4 Full-screen display
If you click button on the main menu, you can see full screen pictures.
If users press the key of ESC, you will return to the selected screen.
OSD in the screen is same as that of DVR
(Channel name, recording on/off, Motion icon, Sensor icon)
84
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.5 Program setup
If users click this button in the main window, window of program setup appears.
Capture a still image and select a folder where the image is recorded
Select the image of water mark to be input in the still image
Set up a program by user’s language
Set up whether alarm occurrence is on or off when motion detection or sensor icon
activated.
Close the window without saving the setup
Close the window after saving the setup
4.3.6 DVR recording
It works as recording button of DVR system. After logging in admin, button will be
activated. Under recording mode at DVR, red icon will be displayed at the top of right at the
window.
85
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
=> DVR (live viewing)
=> DVR (Recording mode)
86
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.7 DVR playback search
This button is used for playback search, playback, and backup functions for DVR and
after logging in by admin.
Enter search time from start time to end time
Check if user want to search event condition
Select targeted channel for search
Close DVR playback search
Start to search by selected searching condition
Previous research result will appears
4.3.8 DVR playback search
Search data will appear list form if users push two buttons at DVR
playback screen.
87
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
DVR search files will appear recording start/end time, channel, and event information
included
Button for staring of backup. With pushing selected channel, start to playback.
Start to playback after pushing selected channel,. If do double click selected files, it starts to
playback.
Close DVR backup window
After selecting a file at list, push play button or do double clicks in order to watch
playback pictures.
88
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Change present mode to playback mode
Display playback picture derived from DVR system
Button for reverse playback, pause, still, reverse phase, forward phase, slow, fast, previous
search, next search
Comeback playback mode to Live viewing mode
Reverse playback button
Playback button
Temporarily pause button
Still image button
When user use temporarily pause image file move to backward
When user use temporarily pause image file move to forward
Play stored files slowly. User can control by clicking this button
89
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Play stored files quickly. User can control by clicking this button
4.3.9 DVR backup
DVR search files will appear recording start/end time, channel, and event information
included
Indicator backup progress at backup
Button for staring of backup. With pushing selected channel, start to backup
Close DVR backup window
After selecting a file at DVR backup list, user can start to backup with pushing start
button
The destination of backup files is below of backup folder located in directory of program
installed. After starting backup,
button changes button, displays backup
progress rate. Even backup, users can stop it by pushing
button. Close DVR
backup window with pushing
button. (Even backup mode, it will be stopped &
closed.)
90
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.10 DVR Setting
This button is for linking into quick installation program, which is used to manage
setting parameter of DVR easily. It can be activated after logging in by admin.
The setting parameter of DVR are displayed.
4.3.11 Still image Capture
Yon can save playing image such as live viewing image, DVR playback image, into
still image by capture. Besides users can capture image by pushing capture button for each
channel or push capture button at the foot of a screen. Still image will be saved in a path
frame directory established in RAMS_M4’s setup section screen. If user change storage path
of still image at setup window, still image will be recorded to destination in the future.
91
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Select check box in order to insert watermark into still image capture
Save still image as user defined default file name if chosen
Save still image as user selected new file name if chosen
Insert keyword to user easy searching
Close still image capture window
Print still image capture file
Save still image. The destination of recording is assigned at still image recording, folder
through setup menu among RAMS_M4 program
4.3.12 Watermark insertion
Click the watermark checkbox then push the save button to save still image with watermark.
4.3.13 Printing still image
To print still image, please push icon in capture screen.
4.3.14 Motion picture recording
With live viewing picture, motion picture recording and saving at local PC
User can record each channel by pushing record button on top right side of channel or
pushing record button at below side of window. After pushing recording, record time setting
window will be popup. Users can change it or not.
92
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Select the targeted channel changed recording time.
Continuous recording until clients stop recording mode
Continuous recording until targeted minutes. Of course, it stopped manually by users
Continuous recording until targeted date & time. It stopped manually by users
For easy searching by keyword, client will insert keyword at search mode
Close record option window
After saving new selected recording option, automatically close it
With starting record, button
will be changed to button.
In order to stop recording, users just push record button again & record. The recording
destination is record directory installed in Program.
4.3.15 PAN/TILT, ZOOM/FOCUS.
These buttons are for PAN/TILT, ZOOM/FOCUS function of DVR and
after logging in by admin and/or one channel selected.
93
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.16 HDD Information
Orange: used parts of HDD,
White: remaining par of HDD. Detailed HDD information will be activated on pushing this
icon.
Select hard disk
It shows total capacity of HDD
It shows the used capacity of HDD used
It shows the capacity of HDD to be used
It shows the capacity of HDD used and to be used
Close the window
4.3.17 Check the program version
Click Logo right upper part icon to check program version or
do S/W upgrade of DVR system
Display the name & version of program
Close the RAMS_M4 information window
94
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Display S/W update window of DVR system
4.3.18 S/W upgrade of DVR
S/W upgrade window is activated on pushing S/W upgrade button in the program version
check screen
: Select targeted files to upgrade
: Select targeted files saved in local PC
: Enter targeted DVR information such as DVR address, Port, user, and password
(admin only)
: Indicator of targeted file’s transmission status
: Close upgrade window
: Transmit targeted files. After that, changed to upgraded cancel (cancel of upgrade
transmission)
=> Display status of SW Upgrade
95
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.3.19 Program minimizing
Rams_M4 program is minimized
4.3.20 Close program
Closed Rams_M4 program
4.4 UniPlayer_M4
4.4.1 Screen and button
Button per channel (Capture, Print)
Playback picture
Indicator for playback progress rate
Reverse playback, playback, still, pause, reverse phase, forward phase, slow, fast
Channel selection button, Panorama playback button
Click the logo to check program version
Uniplayer_M4’s status
Search list
File path is displayed if selected at search list
96
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Button for user searching
Button for directory based searching
Retrieve button for watermark, printing, Capture
Button for sound On/Off, volume adjustment
Button for minimizing
Button for closing program
4.4.2 Search
Users access to search files after push this icon. As files are default mode, without
knowing of files, users can access it.
4.4.2.1 Search option from video image & backup file
Select whether recording files at RAMS_M4 or backup files
Enter targeted recording date for search
Enter targeted DVR name for search
Enter targeted channel
Enter keyword to classification to list
Start to search accordingly
Close search option window
97
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
=> If there is nothing to special condition for searching, all files saved in recording folder will
be displayed on search window after searched.
=> Search window after selected channel number 1 as search option.
98
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.4.2.2 Search option for still image
Enter targeted recording date for search Enter targeted DVR name for search
Enter targeted channel Enter keyword to classification to list
Start to search accordingly Close search option window
=> If there is nothing to special condition for searching, all still images saved in folder will be
displayed on search window after searched.
99
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
=> Search window after selected channel number 1 & selected date (Jun. 28, 2006) as
search option.
4.4.3 Searching by directory
You can use it when you know the directory has AVI file or still image file. It will be
set up default directory at first. After that users can choose their own directory than see all
folder user want to save will be on the list.
100
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
=> AVI file Playing screen by searching scene
4.4.4 Still Image Capture
Save replaying images into still image by capture. Besides users can capture
image by push capture button for each channel or push capture button at the foot of a screen.
101
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Still image will be saved in a path of which is established in RAMS_M4’s setup section screen
Select check box in order to insert watermark into still image capture
Save still image as user defined default file name if chosen
Save still image as user selected new file name if chosen
Insert keyword to user easy searching
Close still image capture window
Print still image capture file
Save still image. The destination of recording is assigned at still image recording folder
through setup menu among RAMS_M4 program
4.4.5 Input water mark
Click the Water Mark checkbox then push the save button to save still image with watermark.
4.4.6 Printing still image
To print still image, please push the button in capture screen. Then use this
button in main page. But In the motion picture state, this button only is
applicable to pause or temporarily pause mode.
4.4.7 Moving picture file playback, playing, pause, temporarily pause, move
by interval of frame, fast forward Playing
Playing-back image file
102
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Playing image file
Temporarily pause image file
Pause
When user use temporarily pause image file, move to backward
When user use temporarily pause image file, move to forward.
Play file slowly. Users can control by click this button.
Play file quickly. User can control by click this button.
4.4.8 Water mark drawing
When still image is display, if push this button watermark will be drawn. If you find
other color except black, white, blue color, image file must get damaged.
Push this
button one more time, reverts to original image state.
103
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
=> Still image Display screen. Push this button
, water mark will be drawn.
Ö Watermark viewing screen. If you find other color except black, white, blue color, image
file must get damaged.
104
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.4.9 Panorama
You can see the panorama screen when you push this button while file playing.
(Button will change into like this button.
. And & button can help user
to view screen while control screen back and forth. And click the one screen which is one of
the 16 channel, you can see 640x480 image. If you want to come out of the panorama mode,
click
button. Then program will go back to former state.
=> Screen in panorama mode.
105
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
=> Image when click one screen in panorama mode.
4.4.10 Check the program version.
Click right part of logo to confirm version.
4.4.11 Program minimizing
UniPlayer_M4 program is minimized
4.4.12 Close Program
Close UniPlayer_M4 program
106
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.5 Quick Installer
4.5.1 Select model
Clicks to select DVR model name and video type in order to set system parameters.
4.5.2 System parameter setting
* Right parts on System parameter setting window is same form as Main menu used in DVR
system. Users can change DVR system parameter by entering each menu.
* Main menu description
* File ->Open: Read to display saved parameter values from DVR system.
1. File ->Save: Click to save setting parameter values as file.
2. File->Close: Click to close program
3. System parameter-> Read parameters from DVR: Derive to display setting
107
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
parameter values
4. System parameter-> Write parameters to DVR: Transfer to save setting
parameters of DVR.
5. System parameter->Default value setting: Initialize parameters values.
6. Communication->Network: Communicate data through network.
7. Communication->Serial: Communicate data through serial port (Setting preferable
Com Port)
8. Language: Click to select preferable language
9. Information: Click to display program version information.
4.5.3 Communication over Network or serial port
Click to open system parameter -> Write to DVR
The below window will be activated on
- After Setting system parameters
- Derive system parameters from DVR
=> Network mode as communication media
Enter assigned network access password for Admin. After authenticated, users can
communication between DVR using network.
=>Serial mode as communication media
Enter assigned network access password for Admin. After authenticated, users can
108
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
communication between DVR using serial port.
4.6 Connection by Internet Explorer
4.6.1 Security setup
In “Internet Option” Menu, Choose “Trusted sites” then click “Sites…” button,
109
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Add your DVR Address.(it possible “IP” or “MAC”).
4.6.2 Download ActiveX control
In order to download ActiveX control, press “confirmation” button, when the message
Appears, and download in the PC.
(If “cancel” button is clicked, program may not be worked)
4.6.3 Connection with DVR
Fill the address of DVR Mac address or IP up in the address window of Internet Explorer.
4.6.4 Login
Fill network password of DVR and press “OK” button, same as Rams_M4 program.
Your DVR address
110
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
4.6.5 Connected screen
1. In the lower part of screen, there are buttons
- button to select the screen division & button to search the moving picture..
2. In the right part of screen, there is a button to control PTZ.
- PTZ control is available when one screen is selected,
- In order to select one screen, double click the required channel.
4.6.6 Search
111
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Same function as search of DVR playback search
Please refer to the article 4.3.7
4.6.7 Playback
This is the screen when it’s playback.. Playback control button in the right parts has same
function as DVR playback in RAMS_M4. Please refer to the article 4.3.8 (DVR manual)
112
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
5 Appendix
5.1 Installing HDD
5.1.1 HDD Install Methods
2 HDD can be installed for 8/16ch DVR.
In case that 1 HDD is installed, HDD should be set to “MASTER” or “SINGLE” mode.
In case that 2 HDD are installed, one HDD should be set to “MASTER” and the other
to “SLAVE” mode.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
OUT
IN
z Unlock all those Volts of “ A” with drivers.
113
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z When You lift up the back part of TOP COVER, DVR unit can be separated into TOP
COVER
z BOTTOM CASE.
z When you look into the inside of case, you can find , assembled HDD BRACKET.
z Unlock those volts of ‘B’ part . (BRACKET separation)
114
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z Assemble HDD with referring to below drawing . This is a picture of ref drawing for
assembling each one of two HDD .
z Those Volts used here are M3.5 x 5L HDD assembly volts (All are included IN Package
when you purchase units or HDD )
115
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z You should do HDD JUMPER setting before or after HDD & BRACKET. This setting
methods are different according to HDD manufacturer.
z Generally you can find some setting information on the top of HDD, you can follows those
instructions.
z In case of one HDD installation, set HDD to ‘MASTER’ or ‘SINGLE’ .
z In case of two HDD, one HDD set to ‘MASTER’, the other HDD set to ‘SLAVE’.
z If you finish the installation of HDD& BRACKET, Put those finished HDD into DVR.
z You can do it as above drawing. Pay attention to the direction of HDD connector.
z Be careful of front panel cable might be stuck in HDD set and DVR.
z Volts can be used same ones when you disassembled.
116
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z A drawing of installation of HDD set in DVR. Pay attention to direction.
z It can be connected to connector & HDD set of circled DVR main board.
z This is a drawing to show how to connect HDD set and DVR main board.
z You can find a red line which is a basic line and it should be matched with triangle shape of
DVR main board.
117
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
5.2 Terminal Information
5.2.1 DSUB-9P (RS-232)
15
69
No Name Description
2 RXD Receive Data
3 TXD Transmit Data
5 GND Signal Ground
5.2.2 DSUB-15P (PTZ / AUX / ALARM / SENSOR)
< 4ch DVR > < 8ch DVR > < 16ch DVR >
No Name Description No Name Description
1 RS-485+ RS-485 Transmit Data + 9 Alarm Out Alarm Out (NO)
2 RS-485- RS-485 Transmit Data - 10 Alarm Out Alarm Out (COM)
3 AUX1 11 Alarm Out Alarm Out (NC)
4 AUX2
Auxiliary In Port
(RSI, ARI, RONOFFI)*
12 Sensor1
5 AUX3 13 Sensor2
6 AUX4 14 Sensor3
7 AUX5
Auxiliary Out Port
(ARO, RSTO, ERRO,
DFO, RSO)*
15 Sensor4
NO/NC
#1
8 GND Signal Ground
118
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
No Name Description No Name Description
1 Sensor5 9 Sensor13
2 Sensor6 10 Sensor14
3 Sensor7 11 Sensor15
4 Sensor8 12 Sensor16
NO/NC
5 Sensor9 13 GND Signal Ground
6 Sensor10 14 GND Signal Ground
7 Sensor11 15 GND Signal Ground
#2
8 Sensor12
NO/NC
4ch DVR: 4 sensors( 15pin D-sub is only one of back part)
8ch DVR: 8sensors, 16ch DVR: 16sensors
* Abbreviation
RSI Record Start In RSTO Record Start Out
RI Alarm Reset In ERRO Error Out
RONOFFI Record On Off In DFO Disk Full Out
ARO Alarm Record Out RSO Record Status Out
119
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
5.3 Factory Default Value
5.3.1 Main Menu
Menu
Main
Menu
Sub Menu1 Sub Menu 2 Sub Menu 3
Default Vale Remarks
Channel Channel No CH-1~CH-16
Camera Name CH-1~CH-16
Covert OFF
Contrast 9 Level Max. 16 Levels
Brightness 9 Level
Picture Setting
Hue 9 Level
Model No NONE URX-500,
PELCO-D,
SENSORMATIC,
VICON,
SUNGJIN
MRX-1000
SRX-100B,
HITRON,
SPECO CVC-
927PTZ,
DMP23-H2,
ELMO,
LG-MULTIX
PTZ ID Channel No
Reverse Control Pan NO
Tilt NO
Zoom NO
Focus NO
PTZ setup
RS-485 Setting Baud Rate 9600 2400,
4800,
9600,
38400,
57600,
115200
SPOT CH 1
Sequence time 2 sec
Channel ALL 1~16
Camera
Setup
Loop Through set
Impedance 75
360x240(NTSC)
360x240,
720x240
Resolution
360x288(PAL) 360x288,
720x288
Audio sync NONE
Channel No CH 1
Quality FINE 4 Levels
Frame rate (FPS) 7
Record
Setup
Channel
Record mode MANUAL
Channel CH-1 Event
Setup
Motion Detection
Setting
Sensitivity 5 Level 8 Levels
120
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Detection Zone ALL
Sensor No Sensor 1
Sensor Type N.O. N.O. / N.C.
Sensor Setting
Channel Link NONE CH1~CH16
Sensor Sensor 1
Alarm Output OFF
Motion CH 1
Alarm Output OFF
Alarm In/Output
Relay time 0 sec 0, 5, 10, 15, 20,
25, 30, 35, 40, 45,
50, 55, 60
Post-Alarm Record 10 sec 10, 20, 20, 40, 50,
60 sec
FTP Server
Address
0.0.0.0
ID anonymous
Password Blank
Target Path /
FTP Setting
FTP Length of
Image
5 sec 5, 6, 7, 8, 9, 10 sec
Channel CH 1
Sensor OFF
FTP Trigger
Setting
Motion OFF
Receiver Address 1~4 Blank E-Mail Address
Setting
Sender Address 1 Blank
Send (period) NO
Prohibition Setting NO
Start hour 01
End hour 01
SMTP Server
Address
0.0.0.0
Authentication YES / NO NO
E-Mail Setting
Password Blank
Event Log CH 1
Channel All
Starting point 30min ago
Playback
Setup
Audio ON
Camera name ON
Date / Time ON
HDD Status ON
Borders ON
Alpha Blending 5 Level 8 Levels
Display
Setup
VGA Setting Mode 1 Mode 1, 2, 3
DDNS Server
Address 1
211.139.14.109
Port 7100
DDNS Server
Address 2
211.104.85.235
DDNS Setup
Port 7100
Admin 111111
Network
Setup
Remote
Connection
Logging Password
User 111111
121
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
DDNS Link OFF
Port 80
IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
STATIC
DNS IP 0.0.0.0
DHCP Port 80
Port 80
ID dvr Registered ID
Password 111111 Registered PW
Network Type
Setup
PPPoE
DNS IP 0.0.0.0
DVR name 16CH DVR
Password setting ****** 111111
Record Stop OFF
Menu enter OFF
Password Apply
System off ON
System password
Auto Key Lock OFF
Time Setup (h/m/s) Current Time
Date Setup Current Date
Time format 24 Format
Date Format YYYY/MM/DD
ON / OFF 0FF
Start date (m/d) 01/01
End date (m/d) 01/01
Time / Date
Day light
saving time
Apply Hour 00
Sensor OFF
Motion OFF
Buzzer
Video Loss OFF
Language ENGLISH
Mounted HDD 1 or 2 No of HDD shows
Write Mode Overwrite Overwrite/Once
Force Deletion OFF 1~100
Capacity Used Cap. / Total Cap. HDD 1
Format
Capacity Used Cap. / Total Cap.
HDD setup
HDD 2
Format
Active HIGH / LOW HIGH
IN UNUSED
AUX Port
Function
Out UNUSED
Factory default
Ramdisk
System
Setup
S/W Upgrade
Kernel
Device USB / CD-RW USB
Start time Date : Date of Yesterday
Time : Current Time
End time Date : Date of Today
Time : Current Time
Channel CH1
Event NONE
Backup
Format CD-RW only
System
Log
122
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Video type Current Type NTSC, PAL
H/W version 0.9.1
S/W version 1.1-2418
Kernel version 2.4.17_2
Can be changed to
Improve the
function
Mac Address 00:09:F8:XX:XX:XX
Audio Support Depends on
software version
System
info
Language English French
German Japanese
Korean Spanish
Depends on
software
version
5.3.2 Search Menu
Menu
Main
Menu
Sub menu1 Sub menu2 Sub
menu3
Default Value Ref.
Calendar Search CURRENT SYSTEM DATE
START TIME
DATE : One day before
Time : Current system time
END TIME
Date : Current System date
Time : Current system time
Event Search
CHANNEL CH1
Search
Still
Image Search
123
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
5.4 Protocol
5.4.1 Code table
No Protocol Description Remarks
1 kmute Audio Mute
2 krec Record
3 khdd HDD Information
4 knet Network user information
5 klog Log Display
6 kinfo System Information
7 knum1 Number 1
8 knum2 Number 2
9 knum3 Number 3
10 knum4 Number 4
11 knum5 Number 5
12 knum6 Number 6
13 knum7 Number 7
14 knum8 Number 8
15 knum9 Number 9
16 knum0 Number 0
17 kseq Sequence
18 kmulti Multi
19 klock Lock
20 kdvr DVR
21 ksearch Search
22 kmenu Menu
23 kup Up
24 kdown Down
25 kleft Left
26 kright Right
27 kok Ok
28 krplay R.Play
29 kstop Stop
30 kplay Play
31 kpause Pause
32 kptz PTZ
33 kfrz Freeze
34 kzoom Zoom
35 kosd OSD
36 k4ch 4ch Division
37 k6ch 6ch Division
38 k8ch 8ch Division
39 k16ch 16ch Division
40 kshold Shuttle Hold
41 ksr8 Shuttle Right 8Step
42 ksr7 Shuttle Right 7Step
43 ksr6 Shuttle Right 6Step
44 ksr5 Shuttle Right 5Step
45 ksr4 Shuttle Right 4Step
46 ksr3 Shuttle Right 3Step
47 ksr2 Shuttle Right 2Step
48 ksr1 Shuttle Right 1Step
49 ks0 Shuttle Right 0Step
124
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
50 ks1 Shuttle left 1Step
51 ks2 Shuttle left 2Step
52 ks3 Shuttle left 3Step
53 ks4 Shuttle left 4Step
54 ks5 Shuttle left 5Step
55 ks6 Shuttle left 6Step
56 ks7 Shuttle left 7Step
57 kjleft Jog left
58 kjright Jog right
59 kpower Power
5.4.2 Usage
- System protocol to control DVR from remote client software installed in PC or remote controller.
- It maps button function of remote controller with front key in the front panel of DVR. If user add
English letters assigned protocol paragraph and \n(new line and transmit ASCII Code form, DVR
will be activated same as for user to push one of pad or remote controller.
125
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
5.5 Recording mode, Quality, FPS, HDD time table
Recording time by HDD ( 1ch basis)
TV
System
Resolution Quality
Frame
Rate
200GB 300GB 500GB
30 FPS
296.60 444.90 741.49
15 FPS
576.09 864.14 1440.23
8 FPS
809.49 1214.23 2023.72
6 FPS
991.77 1487.65 2479.42
4 FPS
1334.20 2001.30 3335.50
2 FPS
2122.28 3183.42 5305.70
Super
Fine
1 FPS
3592.98 5389.47 8982.46
30 FPS
588.14 877.71 1462.86
15 FPS
1058.40 1587.60 2645.99
8 FPS
1412.41 2118.62 3531.03
6 FPS
1735.59 2603.39 4338.98
4 FPS
2238.25 3357.38 5595.63
2 FPS
3385.12 5077.69 8462.81
Fine
1 FPS
5389.47 8084.21 13473.68
30 FPS
894.32 1341.48 2235.81
15 FPS
1511.44 2267.16 3778.60
8 FPS
2037.81 3056.72 5094.53
6 FPS
2512.88 3769.33 6282.21
4 FPS
3175.19 4762.79 7937.98
2 FPS
4654.55 6981.82 11636.36
Enhanced
1 FPS
6826.67 10240.00 17066.67
30 FPS
1190.70 1786.05 2976.74
15 FPS
2058.29 3087.44 5145.73
8FPS
2677.12 4015.69 6692.81
6 FPS
3276.80 4915.20 8192.00
4 FPS
4096.00 6144.00 10240.00
2 FPS
5851.43 8777.14 14628.57
N
T
S
C
360*240
Normal
1 FPS
8031.37 12047.06 20078.43
126
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Recording time by HDD ( 1ch basis)
TV
System
Resolution Quality
Frame
Rate
200GB 300GB 500GB
30 FPS
250.37 375.55 625.92
15 FPS
470.80 706.21 1177.01
8 FPS
651.19 976.79 1627.98
4 FPS
1047.57 1571.36 2618.93
3 FPS
1374.50 2061.74 3436.24
2 FPS
1612.60 2418.90 4031.50
Super
Fine
1 FPS
2608.92 3913.38 6522.29
30 FPS
311.72 467.58 779.30
15 FPS
580.99 871.49 1452.48
8 FPS
787.69 1181.54 1969.23
4 FPS
1272.05 1908.07 3180.12
3 FPS
1638.40 2457.60 4096.00
2 FPS
1950.48 2925.71 4876.19
Fine
1 FPS
3079.70 4619.55 7699.25
30 FPS
471.89 707.83 1179.72
15 FPS
839.34 1259.02 2098.36
8 FPS
1147.34 1721.01 2868.35
4 FPS
1757.94 2636.91 4394.85
3 FPS
2262.98 3394.48 5657.46
2 FPS
2608.92 3913.38 6522.29
Enhanced
1 FPS
4055.45 6083.17 10138.61
30 FPS
626.30 939.45 1565.75
15 FPS
1101.08 1651.61 2752.69
8 FPS
1437.19 2155.79 3592.98
4 FPS
2262.98 3394.48 5657.46
3 FPS
2864.34 4296.50 7160.84
2 FPS
3225.20 4837.80 8062.99
N
T
S
C
720*240
Normal
1 FPS
4818.82 7228.24 12047.06
127
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Recording time by HDD ( 1ch basis)
TV
System
Resolution Quality
Frame
Rate
200GB 300GB 500GB
25 FPS
307.28 460.92 768.19
12 FPS
552.02 828.03 1380.05
8 FPS
706.21 1059.31 1765.52
6 FPS
910.22 1365.33 2275.56
4 FPS
1194.17 1791.25 2985.42
2 FPS
1828.57 2742.86 4571.43
Super
Fine
1 FPS
3034.07 4551.11 7585.19
25 FPS
587.66 881.49 1469.15
12 FPS
1029.15 1543.72 2572.86
8 FPS
1244.98 1867.48 3112.46
6 FPS
1593.77 2390.66 3984.44
4 FPS
2017.73 3026.60 5044.33
2 FPS
3225.20 4837.80 8062.99
Fine
1 FPS
5184.81 7777.22 12962.03
25 FPS
894.32 1341.48 2235.81
12 FPS
1545.66 2318.49 3864.15
8 FPS
1812.39 2718.58 4530.97
6 FPS
2288.27 3432.40 5720.67
4 FPS
2864.34 4296.50 7160.84
2 FPS
4404.30 6606.45 11010.75
Enhanced
1 FPS
6826.67 10240.00 17066.67
25 FPS
1204.71 1807.06 3011.76
12 FPS
2068.69 3103.03 5171.72
8FPS
2367.63 3551.45 5919.08
6 FPS
2989.78 4484.67 7474.45
4 FPS
3723.64 5585.45 9309.09
2 FPS
5535.14 8302.70 13837.84
P
A
L
360*288
Normal
1 FPS
8533.33 12800.00 21333.33
128
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
Recording time by HDD ( 1ch basis)
TV
System
Resolution Quality
Frame
Rate
200GB 300GB 500GB
25 FPS
264.94 397.41 662.35
12 FPS
465.98 698.98 1164.96
7 FPS
650.16 975.24 1625.40
4 FPS
957.01 1435.51 2392.52
3 FPS
1230.03 1845.05 3075.08
2 FPS
1407.56 2111.34 3518.90
Super
Fine
1 FPS
2275.56 3413.33 5688.89
25 FPS
327.68 491.52 819.20
12 FPS
573.67 860.50 1434.17
7 FPS
7898.21 1183.82 1973.03
4 FPS
1157.06 1735.59 2892.66
3 FPS
1484.06 2226.09 3710.14
2 FPS
1853.39 2780.09 4633.48
Fine
1 FPS
3079.70 4619.55 7699.25
25 FPS
486.46 729.69 1216.15
12 FPS
841.07 1261.60 2102.67
7 FPS
1122.19 1683.29 2805.48
4 FPS
1600.00 2400.00 4000.00
3 FPS
2037.81 3056.72 5094.53
2 FPS
2512.88 3769.33 6282.21
Enhanced
1 FPS
4015.69 6023.53 10039.22
25 FPS
642.01 963.01 1605.02
12 FPS
1104.04 1656.06 2760.11
7 FPS
1432.17 2148.25 3580.42
4 FPS
2048.00 3072.00 5120.00
3 FPS
2592.41 3888.61 6481.01
2 FPS
3103.03 4654.55 7757.58
P
A
L
720*288
Normal
1 FPS
4876.19 7314.29 12190.48
z Recording hour can be a little bit different according to input size.
128

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Monacor DMR404 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Monacor DMR404 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info