13
Message texts
The message texts contain the texts that, in addition to the name and
location, are included in the messages. These texts can be adapted to your
own text. Forwarding a notification can be prevented by starting the
message text with $$--.
4.5 HOW TO ACTIVATE THE THERMOGUARD
After the previous steps the Mobeye ThermoGuard is ready for use. It is
armed automatically.
In order to switch off (disarm) the Mobeye ThermoGuard:
- Press the button at the backside for 1 second.
The green LED switches off to indicate the
disarmed status.
In the disarmed status the Mobeye
ThermoGuard will not send alarm
notifications. The unit remains active and is
able to switch on time-controlled and to send
test and 'low battery voltage' messages.
In order to switch on (arm) the Mobeye ThermoGuard:
- Press the button at the backside for 1 second. The green LED blinks once
every 3 seconds (battery-powered) or stays on continuously (in case of an
external power supply).
If powered externally (with network connection), switching can be done via
SMS commands:
SMS command to switch on: CODE ARM (e.g. 1111 ARM)
SMS command to switch off: CODE DISARM (e.g. 1111 DISARM)
To update the status in the Mobeye Internet Portal: press the button for 5
seconds, or - if the device is externally powered - send a question mark to
the unit (without code).
SMS command status update: ? The status including the temperature
value in the portal will be refreshed
(only possible with external power).
