493640
20
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
EN-20
Menu operation (continued)
4. SINGAL menu
Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
When you change the value of the horizontal or vertical position drastically, noise may appear.
The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value
is changed. These conditions are not a malfunction.
SHUTTER does not work correctly during keystone adjustment.
When you increase the value of OVER SCAN, noise may appear on the screen.
Important:
You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.
5. INFORMATION menu
Menu option Setting Feature description
SIGNAL USER menu
HORIZ. POSITION 0-999 Select this setting to adjust the horizontal position of projected images.
VERT. POSITION 0-999 Select this setting to adjust the vertical position of projected images.
FINE SYNC. 0-31
Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
TRACKING 0-2800
Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
COMPUTER INPUT
AUTO Automatically sets the appropriate setting.
RGB
Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this setting when you connect the projector to a DVD player or
other device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video
output terminals.
OVER SCAN 100%-90% Use this setting to adjust the display area of projected images.
HOLD OFF / ON
Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
USER
CLAMP POSITION 1-255
Use this setting to correct solid white or solid black that appears in pro-
jected images
CLAMP WIDTH 1-63 Use this setting to correct solid black that appears in projected images.
VERT.SYNC AUTO / OFF
Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
LPF ON / OFF Select this setting to enable or disable LPF.
SHUTTER(U) 0-20
Use this setting to adjust projected images when noise appears in the
top part of the image.
SHUTTER(L) 0-20
Use this setting to adjust projected images when noise appears in the
bottom part of the image.
SHUTTER(LS) 0-20
Use this setting to adjust projected images when noise appears in the
left half of the image.
SHUTTER(RS) 0-20
Use this setting to adjust projected images when noise appears in the
right half of the image.
Menu option Feature description
LAMP TIME (LOW)
This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than
the actual time. (See page 26 for the interval of lamp replacement.)
When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating
time exceeds 10 hours, the actual hours are displayed.
When the lamp operating time reaches 3000 hours, the bar turns yellow. When it reaches
3800 hours, the bar turns red.
(The lamp lifetime is 4000 hours.)
INPUT Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-
QUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE Indicates the type of the sync signal for the currently projected video signal.
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT.POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
opt.
OK
OFF
HOLD
100%
OVER SCAN
CLAMP
POSITION
USER
1
CLAMP WIDTH 1
LPF OFF
SHUTTER(U) 0
SHUTTER(L) 0
VERT. SYNC AUTO
?
SHUTTER(LS) 0
SHUTTER(RS) 0
SIGNAL
opt.
INFORMATION
opt.
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE 5wire
60.02 KHz
75.04 Hz
1024x768
COMPUTER2
0 H
RG
HV
B
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi XD500U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi XD500U in de taal/talen: Engels als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info