475290
18
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
18
Chapter . . .
Back Panel, continued
12. Input DTV (480i/480p/720p/1080i)
This input is used to connect an external DTV receiver,
and can be configured for YPrPb or RGB plus H&V signal
types. Please see Appendix B for signal compatibility.
13. Monitor Output (Audio Video 1, Audio 2)
The Monitor Output sends the TV audio and video signals
from Ant-A, Ant-B or Inputs 1-3 to an A/V Receiver or
other analog A/V equipment. Ant-DTV and IEEE 1394
sources will be provided as down converted analog
signals to the Monitor Output jacks.
There will be no video signals from digital products if the
original signals are copy protected. No video signals are
provided from PC, Component 1 and 2, MonitorLink or
Input-DTV.
For recording with a VCR, use Audio Video 1. When
connecting to an A/V Receiver, use Audio 2. If using the
A/V Receiver with NetCommand, the Audio 2 output will
always be Main, not PIP. If using an A/V Receiver without
NetCommand and Audio 2 is set for PIP audio then the
PIP’s or POP’s audio signal is sent to an amplifier or
wireless headphones. If no PIP or POP is displayed, the
output will not send audio.
14. Audio for PC or MonitorLink/DVI-HD
Audio signals are provided from PC or MonitorLInk/DVI-
HD. The top two connectors are audio inputs to be used
with the PC input. The bottom two connectors are to be
used with MonitorLink/DVI-HD inputs.
NOTE: When MonitorLink is used as a DVI-HD input,
the terminal is compliant with EIA-861 standards
for extended and high definition video and is not
intended for use with personal computers or devices
outputting video signals with computer resolution.
7. MonitorLink/RS-232C Control
A digital control interface that works in conjunction with
MonitorLink. While MonitorLink provides the digital
video signal, MonitorLink Control provides enhanced
functioning such as automatic power ON/OFF and input
selection. If you are not connecting a Mitsubishi HDTV
Receiver/Controller with MonitorLink features, MonitorLink
Control can be used as an RS-232C control signal input
port with an external control system. Please visit
www.mitsubishi-tv.com for RS-232 command protocol.
8. PC Video, VGA/SVGA/XGA/WXGA/
SXGA/720p/1080p 60Hz
This input can be used for the connection of a computer.
Please see Appendix B in Book 2 for signal compatibility.
If NetCommand has not been setup, the on-screen
display name will be VGA.
9. IEEE-1394 Input/Output
These jacks allow the TV to connect to external digital
products by means of a single cable. Three (two on the
back panel and one on the front) jacks are provided for
this purpose, which allow for a high degree of flexibility
for connecting your system together. Please refer to the
NetCommand information later in this book for IEEE-1394
device connection details.
10. Audio/Video Inputs 1-2
These inputs can be used for the connection of a VCR,
Super VHS (S-VHS) VCR, DVD player, standard satellite
receiver or other A/V device to the TV. Please note that if
you connect to the S-VIDEO terminal, the VIDEO terminal
is deactivated. The VIDEO terminal is active when there is
no S-VIDEO connection.
11. Component Inputs 1-2, YPbPr
(480i/480p/720p/1080i)
These inputs can be used for the connection of A/V
equipment with component video outputs, such as a DVD
player or external HDTV receiver. Please see Appendix B
in Book 2 for signal compatibility.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi WL-82913 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi WL-82913 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info