475262
96
Verklein
Vergroot
Pagina terug
1/110
Pagina verder
96 Appendices
For assistance call 1(800) 332-2119
Appendix E: Troubleshooting, continued
Sound
Symptom Remarks
1. There is no sound even when the
volume is turned up.
• Checkifthe
MUTE
key is on.
• TheTV’sanalog
Listen to
setting may be set to SAP (analog
program from the ANT input) but no SAP is being broadcast.
• CheckthattheSound > Audio > TV Speakers option is set to
On
to hear sound from the TV speakers. Possibly the
TV Speakers
option is
Off
or set to
Center
but there is no A/V receiver con-
nected.
• IfusinganA/Vreceiver,checkthattheSound > Audio > TV
Speakers option is set to
Off
to hear sound from the A/V receiver
speakers.
•
Press and hold the
POWER
button on the control panel for 10
seconds to perform System Reset.
The language selected in the Setup > Antenna Digital Audio
menu is not being broadcast for the current program.
2. The sound does not match the screen
picture.
The TV’s analog
Listen to
setting
may be set to SAP
(analog program
from the ANT input)
.
3. The sound from my A/V receiver does
not match the screen picture (I should
hear the correct audio from my A/V
receiver).
• Check that
DIGITAL AUDIO OUTPUT
and/or
AUDIO/SURROUND
OUTPUT
on TVs connection panel is connected to the A/V
receiver.
Without this connection, devices connected only to the TV (and
not the A/V receiver) can be heard only from the TV speakers.
Note that this includes the
ANT
input, a device (such as a
camcorder) connected to the TV, and any other device sending
audio to the TV only.
• If using a NetCommand-controlled A/V receiver, NetCommand
may be selecting the wrong A/V receiver audio input. Check the
A/V receiver’s NetCommand setup in the Inputs > AVR menu.
4. Cannot select an audio-only device; it
does not appear in the Input Selection
menu.
Plug an unused video plug into the
Y/VIDEO
jack to activate Auto
Input Sensing. Assign the name CD/Audio or MP3 to make the
audio device selectable in the Input Selection menu.
5.. Sound is coming from the TV speakers
instead of the A/V receiver.
• Connect the TV’s
AUDIO OUT
to the A/V receiver.
• Change TV Speakers setting to Off or Center.
7. A color program appears as a black and
white image, or the colors are dim, or the
screen is black.
• If using component video, check that the red, green, and
blue input cables are correctly connected to the red, green,
and blue component video jacks.
• If using composite video, check that the incoming cable is
connected the TV’s green
Y/VIDEO
jack.
• 838 Series. The PerfectColor color balance has been incor-
rectly set. Reset the PerfectColor balance.
8. Picture from an HDMI input is noisy (poor
quality).
• Compare the picture to the TVs test picture (Picture >
Picture+ > Test Picture) to check if the noise is internal or
external to the TV.
• Upgrade a Category 1 (unmarked) HDMI cable to a newer
type of high-speed HDMI cable.
9. The image from a computer appears dis-
torted when viewed on the TV.
• Normal TV operation. The TV does not correct distortion in
the picture from a computer because the correction process
may cut off the edges of the image.
• The aspect ratio may be wrong for the image. Press
FORMAT
to change.
96

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi WD-60738 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi WD-60738 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info