664856
137
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
-
134
-
(1) Tools exclusive for R410A
a) Gauge manifold
As R410A is characterized by high pressure, conventional tools cannot be used.
In order to prevent any other refrigerant from being charged accidentally, each port of the manifold has been changed in
shape.
b) Charge hose
As R410A is characterized by high pressure, the pressure resistance of the charge hose has been increased. The material has
also been changed to an HFC resistant type, and, as in the case of each port of the manifold, the hose cap size has been
changed. Furthermore, for prevention of gas pressure reaction, a charge hose with a valve placed near the cap is also avail-
able.
c) Electronic balance for refrigerant charging
As R410A belonging to the HFCs features high pressure and high evaporating speed, when R410A is charged by using a
charging cylinder, R410A in the cylinder cannot be kept in a liquefied state and gasified refrigerant bubbles in the charging
cylinder, it becomes difficult to read values. Therefore, it is advisable to adequately use an electronic balance for refrigerant
charging.
An electronic balance for refrigerant charging has higher strength due to its structure with four points of support for refrig-
erant cylinder weight detection. As the charge hose connecting part has two ports-one for R22 (7/16 UNF 20 threads per
inch) and the other for R410A (1/2 UNF 20 threads per inch) - it can also be used for charging the conventional refrigerant.
•Two types of electronic balance for refrigerant charging are available - one for 10kg cylinder and the other for 20kg cylinder.
Electronic balance for 10kg cylinder precision ± 2g
Electronic balance for 20kg cylinder precision ± 5g
Refrigerant is charged manually by opening/closing the valve.
d) Torque wrench (for nominal diameters 1/2 and 5/8)
Along with changes in flare nut sizes for enhanced pressure resisting strength, torque wrenches for R410A differ in opposite
side size.
Table 11. Differences between conventional high/low pressure gauges and those for R410A
Conventional gauges Gauges exclusive for R410A
High pressure -0.1~3.5MPa -0.1~5.3MPa
gauge (red) -76 cmHg~35 kgf/cm
2
-76 cmHg~53 kgf/cm
2
Compound -0.1~1.7MPa -0.1~3.8MPa
gauge (blue) -76 cmHg~17 kgf/cm
2
-76 cmHg~38 kgf/cm
2
Table 12. Differences in port size between conventional manifold and that for R410A
Conventional manifold Manifold for R410A
Port size
7/16 UNF 1/2 UNF
20 threads per inch 20 threads per inch
Table 14. Differences between conventional wrenches and those for R410A
Conventional torque wrench Torque wrench for R410A
For 1/2 (opposite side 24mm × 55N·m 26mm × 55N·m
× torque) (550 kgf·cm) (550 kgf·cm)
For 5/8 (opposite side 27mm × 65N·m 29mm × 65N·m
× torque) (650 kgf·cm) (650 kgf·cm)
Table 13. Differences between conventional charge hose and that for R410A
Conventional charge hose Charge hose for R410A
3.4 MPa (34 kgf/cm
2
) 5.1 MPa (51 kgf/cm
2
)
17.2 MPa (172 kgf/cm
2
) 27.4 MPa (274 kgf/cm
2
)
Engineering material NBR rubber
HNBR rubber
internally coated with nylon
Cap size
7/16 UNF 1/2 UNF
20 threads per inch 20 threads per inch
Pressure
resistance
Normal pressure
Breaking pressure
137

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi SKM25ZG-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi SKM25ZG-S in de taal/talen: Engels als bijlage per email.

De handleiding is 6,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Mitsubishi SKM25ZG-S

Mitsubishi SKM25ZG-S Gebruiksaanwijzing - Nederlands - 24 pagina's

Mitsubishi SKM25ZG-S Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info