583418
25
Verklein
Vergroot
Pagina terug
1/802
Pagina verder
– 24 –
Setting the representative unit and demand4
Directly press a unit name to select the unit from the list of Unit Entry.10.
Press the Rep. cell. 11.
That unit is set as the representative unit, and an asterisk is placed to the left of its name in the display.
Representative unit: unit for which the status is shown when the group is displayed ·
Press the Demand cell.12.
That unit is set as for the demand operation, and a mark such as D1, D2, or D3 is placed to the right of its
name.
Demand: · A unit that shifts its set temperature by 2 deg C or switches to fan mode when there is an
external demand input, and then cannot be operated from the remote controller.
Note
By the demand input, it is possible to save on power costs by reducing the power consumption.
Operation of the unit when demand input is released, is conformed to nearest schedule before release time
of the day.
page 43
In case schedule of the day is not set, the unit is for the operation mode and remote controller permission/
prohibition setting which is just before the demand input.
Up to three demand levels can be set. In level 1, the set temperature of the air conditioner set to D1 shifts by
2 deg C (+2 deg C in cooling or dry mode or -2 deg C in heating mode). In level 2, the units set to D1 or D2
switch to fan mode. In level 3, the units set to D1, D2, or D3 switch to fan mode.
To use the demand control, a demand signal must be inputted. For more information, contact your installation *
contractor or dealer.
Setting and unsetting batch operation for the group5
Press the VALID or INVALID button.13.
VALID: group set up for batch operation ·
INVALID: group not set up for batch operation ·
Saving the settings6
Press the SET button. Press the Yes button on the confi rmation screen. 14.
The group settings are saved. When you do not want to save the settings, press the No button.
Note
1 to 16 units can be registered in a group.
When you will delete all group defi nition, press the DELETE ALL SETTING button and enter your password
Press the Yes button on the confi rmation screen.
Caution
All schedule settings are deleted too.
Attention
If an unconnected air conditioner is registered in a group, a “Communication error” may occur, affecting
communication of the whole system and causing an unintended operation to be performed. Do not register
unconnected units in a group.
Also note that, at the initial setting, one air conditioner is registered in one group in advance. If the unit is
an unconnected unit, it must be deleted individually. It is recommended that, when registering new groups,
you press the “DELETE ALL GROUPS” button to delete all groups once, and then register groups for
connected units. That certainly is an easier way to confi gure the settings as well as a sure method to prevent
communication errors.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi SC-SL4-AE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi SC-SL4-AE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks als bijlage per email.

De handleiding is 164,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info