493662
24
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
EN-24
Menu operation (continued)
4. SIGNAL menu
Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
When you change the horizontal or vertical position to a large extent, noise may appear.
The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position
even when the setting value is changed, such symptom is not a malfunction.
SHUTTER will not work correctly during keystone adjustment.
When you increase the setting value of OVER SCAN, noise may appear on the screen.
See pages 27 and 28 for the detailed setting procedure.
Important:
You can set the IMAGE, SIGNAL, SIGNAL-RESOLUTION (MEMORIZE) and SIGNAL-USER menus only when the signal is supplied.
Menu option Setting Feature description
SIGNAL RESOLUTION
(MEMORIZE) menu
SIGNAL USER menu
MEMORY CALL
AUTO / MEMORY 1 /
MEMORY 2
Use to select the setting of RESOLUTION (MEMORIZE) already saved.
Impossible to select if no setting has been saved. AUTO is selected by
default. It optimizes the signal format automatically depending on the
type of video signal supplied from the computer. Press the ENTER but-
ton to clear the setting already saved.
RESOLUTION
(MEMORIZE )
The current resolution is displayed. To change the current setting, press
the ENTER button to display the RESOLUTION (MEMORIZE) menu.
The new setting can be saved to MEMORY 1 or MEMORY 2.
VERTICAL
FREQUENCY
-
The vertical frequency of the currently projected video signal is dis-
played.
HORIZONTAL
FREQUENCY
-
The horizontal frequency of the currently projected video signal is dis-
played.
HORIZ. PIXELS 640-1920
The number of horizontal pixels of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE, and
then press the ENTER button, the image is automatically adjusted
according to the resolution you set. The adjustment result can be saved
to MEMORY 1 or MEMORY 2.
VERT. LINES 350-1200
The number of vertical pixels of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE, and
then press the ENTER button, the image is automatically adjusted
according to the resolution you set. The adjustment result can be saved
to MEMORY 1 or MEMORY 2.
EXECUTE OK
Press the ENTER button to start the automatic adjustment. At the com-
pletion of the automatic adjustment, a message is displayed and you
can save the adjustment result to MEMORY 1 or MEMORY 2.
CANCEL OK
The process to change the current resolution is canceled and the SIG-
NAL menu is displayed.
HORIZ. POSITION 0-999 Use to adjust the horizontal position of the projected image.
VERT. POSITION 0-999 Use to adjust the vertical position of the projected image.
FINE SYNC. 0-31
Use to eliminate flickering or blur, if appears, viewing the projected
image.
TRACKING 0-9999
Use to eliminate vertical wide stripes, if appears, viewing the projected
image.
COMPUTER INPUT
AUTO The proper setting is automatically selected.
RGB
Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this option when connecting the projector to a DVD player or
other device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video
output terminals.
OVER SCAN 100%-90% Use to adjust the display area of projected image.
HOLD OFF / ON
Use to adjust the image when flagging occurs near the top of the
screen.
USER OK
CLAMP POSITION 1-255 Use to correct solid white or solid black in the projected image.
CLAMP WIDTH 1-63 Use to correct solid black in the projected image.
VERT. SYNC AUTO / OFF
Use to adjust the image when its motion doesn’t run smoothly. Select
AUTO for normal use.
LPF ON / OFF Use to select whether or not to enable the LPF.
SHUTTER(U) 0-20
Use to adjust the image when noise appears on the top part of the
image.
SHUTTER(L) 0-20
Use to adjust the image when noise appears on the bottom part of the
image.
SHUTTER(LS) 0-20
Use to adjust the image when noise appears on the left half of the
image.
SHUTTER(RS) 0-20
Use to adjust the image when noise appears on the right half of the
image.
USER
OK
OFF
HOLD
100%
OVER SCAN
SIGNAL
R G B
R G B
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
opt.
MEMORY CALL
RESOLUTION
(MEMORIZE )(MEMORIZE )
V
H
A
U
AUTO
1024x768
SIGNAL
RESOLUTION (MEMORIZE)
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
VERT. LINES
EXECUTE
HORIZ. PIXELS
CANCEL
opt.
75.04 Hz
1024
60.02 KHz
768
OK
OK
SIGNAL
USER
CLAMP
POSITION
1
CLAMP WIDTH 1
LPF OFF
SHUTTER(U)
VERT. SYNC. AUTO
0
?
SHUTTER(L)
0
SHUTTER(LS)
0
SHUTTER(RS)
0
opt.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi FD630U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi FD630U in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info