25
Controls
1. IR LEDs with black flash for night shots
2. Twilight sensor
3. Activation LED in blue
4. Camera lens
5. Lock
6. Motion sensor
7. External power supply
8. 2“ LCD color display
9. Slot for memory card
10. Control and input buttons
11. Main switch with three positions
OFF / SET UP / ON
12. External power supply (6V DC)
13. USB cable connection
14. Menu button
15. Battery compartment for 10x1.5 volt AA batteries
16. 2 mounting brackets
17. ¼“ tripod thread
Preparing your camera
Explanation of the controls
Proceed as follows to prepare the camera for the re-
quired use:
1. Place your DTC 600 on a flat surface.
2. Push up the lock (5) on the right of the camera body.
3. Fold the lock (5) over on the right hand side.
4. Open the front of the camera to the left.
On the left hand side of the opened camera body you will
see the controls (10, 11, 14) and on the right hand side
you will see the battery compartment (15).
On the outer edge of the left hand camera body you will
now see the slot for the memory card (9). In the upper
section of the inner surface there is a 2“ LCD display (1).
Beneath this display you will see the four arrow keys for
the menu operation (10). These arrow keys surround the
OK button that is used to confirm the selected menu
settings and there is another oval-shaped button on
the upper right for further switching options (14). On
the bottom left is the main switch with three switching
positions (11):
