10
Taking pictures with digital zoom
The DD100 has a digital zoom with which you can get up to
4 times magnification of the subject matter you have in view.
Please follow the instructions given below to take pictures
using the digital zoom:
1. Press the Power On/Off button to switch on the DD100.
You are now in shooting mode.
2. Frame your subject matter in the viewfinder.
3.You can zoom the subject matter in using the
ᮡ
/T button
(up) and zoom it out again with the
ᮢ
/W button (down).
4. Hold the camera still and press the shutter release to take
the picture.
5.A beep signal confirms the correct recording of the image.
6. When you let go of the shutter release you will see that
the image counter indicates one image less.
Main menue
Camera
Flash
Quality
Self-timer
WB
EV
Exit
Shooting with flash
Your DD100 has an integrated flash unit. Contrary to conven-
tional cameras (with film), digital cameras are much more sen-
sitive to light.You therefore only have to use the flash on digital
cameras when the ambient light is very low. It is for this reason,
and also to save the batteries, that the flash function of the
DD100 is preset to "Off”. In the "Auto”setting the flash swit-
ches on automatically when required. In difficult light situati-
ons or if you wish to obtain special effects, you can switch on
the flash manually choosing "On.” Please follow the instruc-
tions given below to select the desired flash function.
1. Switch on the DD100 by pressing the Power On/Off
button.You are now in shooting mode.
2. Press the OK/Menu button to access the main menu.
3. Using the
ᮡ
/T button (up) and the
ᮢ
/W button
(down)" you can move around in the menu selection.
Select the function "Flash" and confirm with the OK/
Menu button.
4. Select the desired flash function with the
ᮡ
/T button (up)
and
ᮢ
/W button (down)
- Auto
- On
- Off
5. Confirm the desired flash function by pressing the OK/
Menu button.A beep signal confirms the change.
