6
The right power supply
The DD100 requires 2 batteries of the size AAA/LR03.The ca-
pacity of the AAA batteries is sufficient for approx. 50 shots
with flash and approx. 250 shots without flash. Intensive use
of the TFT monitor for viewing the image may significantly re-
duce this capacity. We therefore recommend the use of
rechargeable batteries.We recommend the use of recharge-
able batteries. In this respect please make sure only to use
NiMH type batteries. Other batteries could damage your ca-
mera and make warrantee claims null and void. NiMH bat-
teries and appropriate charging devices are available from
specialist stockists.
Please read the important notes and battery information
given below prior to inserting batteries in the camera.
Inserting the batteries
1. Open the battery compartment of your DD100 by sliding the
cover in the direction indicated by the arrows.
2. Take 2 new batteries of size AAA/LR03 and insert these in
the battery compartment. Pay attention to the correct
polarity (+/-) indicated on the side of the battery.
3. Slide the cover back over the battery compartment.
Important information on batteries
• All images remain stored in your digital camera, also after
removing the batteries from the camera.
• Upon actuation of the "Auto-off function" in the Setup
mode the camera automatically switches back to Stand-
by mode.All images taken are then saved in the integrated
memory.
• Only replace batteries in switched off condition.
• Remove the batteries prior to storing the camera or if you
do not intend using it for a prolonged period of time.
• When using rechargeable batteries, only use NiMH type
batteries. Rechargeable batteries are not charged via the
USB port in the camera!
