102718
13
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
11
10
Getting Ready
Basic Photography For Still Image
Under Still Image Shooting Mode
Set The Shooting Mode (Default: AUTO)
Press OK/Menu Button to set the shooting mode. There are 7 options
which are:
1. Press the Power Button to turn on the camera.
2. Make sure the camera is set at Still Image Shooting Mode.
3. Use Tele/Wide Button to zoom in and zoom out.
4. Press the Macro Button (
) if required (closer than 60cm).
5. Press the Shutter Button halfway for focusing and then press the
Shutter Button fully down to capture the image.
AUTO
PROGRAM
NIGHT
PORTRAIT
SUNSET
BACKLIGHT
FIREWORKS
MODE SET
EXIT : MENU MOVE:
AUTO
PROGRAM
NIGHT
PORTRAIT
SUNSET
AUTO MODE
Under this mode the following settings will
be automatically locked at the factory
default settings and cannot be adjusted.
(a) Metering:Multi
(b )Sharpness:Normal
(c) Effect:Normal
(d) White Balance:Auto
(e) Shooting : Single
(f) Flash:Only
1. Auto Flash
2. Auto Flash & Red-eye Reduction
3. Flash Off are
available.
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
999
7M
8:08 AM
2007/01/05
1
3 4
MENU
OK
5
999
9M
8:08 AM
2007/01/05
MENU
OK
1. OK / MENU
2. or
3. OK / MENU
MENU
OK
MENU
OK
2
999
7M
8:08 AM
2007/01/05
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
1. OK / MENU
2. or
3. OK / MENU
Operation Steps
Operation Steps
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
13
12
In program mode, the metering,
sharpness, effect, WB, frame, shooting
flash & ISO can be adjusted.
Under Still Image Shooting Mode
MODESET
EXIT : MENU MOVE:
AUTO
PROGRAM
NIGHT
PORTRAIT
SUNSET
PROGRAM MODE
MODESET
EXIT : MENU MOVE:
AUTO
PROGRAM
NIGHT
PORTRAIT
SUNSET
PORTRAIT MODE
Under this mode the settings below
will be locked.
(a) Metering : Multi
(b) Sharpness : Normal
(c) Effect : Normal
(d) White Balance : Auto
(e) Shooting : Single
(f) Flash : Only
1. Auto Flash & Red-eye Reduction
2. Flash off are available.
MODESET
EXIT : MENU MOVE:
AUTO
PROGRAM
NIGHT
PORTRAIT
SUNSET
NIGHT MODE
Under this mode the settings below
will be locked.
(a) Metering : Multi
(b) Sharpness : Normal
(c) Effect : Normal
(d) White Balance : Auto
(e) Shooting : Single
(g) Flash : Only
1. Slow Sync
2. Flash off are available.
Under Still Image Shooting Mode
MODESET
EXIT : MENU MOVE:
AUTO
PROGRAM
NIGHT
PORTRAIT
SUNSET
SUNSET MODE
Under this mode the settings below
will be locked.
(a) Metering : Multi
(b) Sharpness : Normal
(c) Effect : Normal
(d) White Balance : Auto
(e) Shooting : Single
(f) Flash : Flash Off
MODESET
EXIT : MENU MOVE:
PROGRAM
NIGHT
PORTRAIT
BACK LIGHT
FIREWORKS
BACKLIGHT MODE
Under this mode the settings below
will be locked as below.
(a) Metering : Spot
(b) Sharpness : Normal
(c) Effect : Normal
(d) White Balance : Auto
(e) Shooting : Single
(f) Flash : Fill-in Flash
MODESET
EXIT : MENU MOVE:
NIGHT
PORTRAIT
SUNSET
BACK LIGHT
FIREWORKS
FIREWORKS MODE
Under this mode the settings below will be
locked.
(a) Metering : Multi
(b) Sharpness : Normal
(c) Effect : Normal
(d) Whi te Balance : Auto
(e) Sho oting : Single
(f) Fla sh : Flash Off
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
Operation Steps
1. OK / MENU
2. or
3. OK / MENU
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
14
15
Zoom In & Zoom Out
Other Settings
The Zoom Indication Bar, appearing
on the top side of the TFT LCD
Monitor shows the current zoom
status. This camera allows
maximum 3.0x optical zoom and
5.0x digital zoom.
When the shooting subject is within
1cm~60cm, please first press the
Macro Button ( ) and choose the
proper focusing range before you
take the shot.
( ) 10cm~60cm
( ) 1cm~10cm
Normal: 60cm~infinity
1.The Macro icons will show on the
TFT LCD monitor when the macro
feature is set.
2.Please press the Macro Button ( )
to cancel the macro setting if you
prefer the next image not to have the
macro feature.
Macro Mode
By pressing the Flash Mode Button ( ) you can select different flash
options as follows.
Flash MODE
X1.1
( 3.0X )
( 5.0X )
Auto Flash
Auto Flash with
Red-eye
Reduction
Flash Off
The flash fires automatically as required under shooting mode.
To avoid the subject's eyes appearing red in the image, this
mode can effectively minimize the likelihood of the red-eye effect.
The mode will disable the flash.
Fill-in Flash
This m
ircumstances.
ode will enable the flash to fire in any
c
Slow Sync
The flash will fire and the camera will set the shutter speed at
a proper speed.
Under Still Image Shooting Mode
Under Still Image Shooting Mode
999
7M
8:08 AM
2007/01/05
999
7M
8:08 AM
2007/01/05
999
7M
8:08 AM
2007/01/05
Manual Focus
With a long press of the Macro Button ( ),
you can enter the manual focus mode.
Anther long press of the Macro Button ( )
allows you to return to audo focus. There
are 3 focus ranges under this mode as
follows:
To choose the focus you prefer,
please
press the Macro Button.
( ) The focus is set at 2M.
( ) The focus is set at infinity.
( ) The focus is set at 0.8m.
2m
0.8m
2m
0.8m
8
999
7M
8:08 AM
2007/01/05
2m
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
17
16
Self-timer
With the 10 sec. Self-timer ( ):
The image will be taken after an inter
val of 10 seconds once the Shutter
Button is released.
With the 2 sec. Self-timer ( ):
The image will be taken after an
interval of 2 seconds once the Sh utter
Button is
released.
With the Do uble self-timer ( ):
The image will be taken twice once the
Shutter Button is released.
The first image will be taken after 10
seconds and the second image 2
seconds after the first.
2S
X1.1
Voice Memo
Image Size( Default:3072x2304)
SIZE
EXIT : MENU MOVE:
9M
3456x2592
7M
3072X2304
5M
2560X1920
3M
2048X1536
1M
1280X960
There are 2 ways to add the voice
memo to an image:
1. At Still Image Shooting Mode
(a) Press OK/Menu Button and choose
"VOICE ME MO"
(b) Choose "SINGLE" to enable a voice
memo for this image you are going
to take or choose
"CONTINUOUS"
to have voice memos for the images
from now on (you can cancel the
voice memo function by choosing
"OFF").
(c) 10 seconds of voice memo will be
recorded.
2. At Playback Mode ( 
)
(a) Choose the image to which you wish
to add a voice memo.
(b) Press Up Button and press the
Shutter Button to start the voice
memo.
(c)10 seconds of voice memo will be
recorded.
After the voice memo is
added onto the
image, ( ) will be shown on the image
as a notice in the Playback Mode.
The options of the image size are as
follows:
(9M) 3456 x 2592 (via interpolation)
(7M) 3072 x 2304
(5M) 2560 x 1920
(3M) 2048 x 1536
(1M) 1280 x 960
Under Still Image Shooting Mode
Under Still Image Shooting Mode
VOICE MEMO
EXIT : MENU MOVE:
OFF
SINGLE
CONTINUOUS
Operation Steps
1. OK / MENU
2. or
3. or
999
7M
8:08 AM
2007/01/05
999
7M
8:08 AM
2007/01/05
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
18
19
Image Quality ( Default:FINE)
Under Still Image Shooting Mode
Under Still Image Shooting Mode
QUALITY
EXIT : MENU MOVE:
S. FINE
FINE
NORMAL
The Image quality options are provided
as follows:
( ) Super Fine
( ) Fine
( ) Normal
Metering ( Default:MULTI)
METERING
EXIT : MENU MOVE:
MULTI
SPOT
By changing the camera's metering
pattern you can improve exposure and
brightness of your image if necessary.
Multi Metering:
Exposure will be evaluated according
to the average of the available light
sources in the image area. This is
suitable for general use.
Spot Metering:
If the subject is against
the light source
or has little contrast, you can use this
function to have the subject be brighter.
Sharpness( Default:NORMAL)
SOFT
NORMAL
VIVID
This effect can make the edge of the
captured image look smoother, which
is suitable for image editing on PC.
This effect can make the edge of the
captured image look sharp, which is
suitable for printing out.
This effect can make the edges of
your captured image look sharper but
may
result in more image noise.
EXIT : MENU MOVE:
SHARPNESS
SOFT
NORMAL
VIVID
Operation Steps
1. OK / MENU
2. or
3. or
Continuous Shooting ( Default:SINGLE)
SHOOTING
EXIT : MENU MOVE:
SINGLE
CONTINUOUS
1.SINGLE: No continuous shooting.
2.CONTINUOUS: You can have the
continuous shooting function starting
by pressing the Shutter Button and on
hold and ending by letting go of the
Shutter Button.
Note
The continuous shooting function will
not be canceled until "SINGLE" is
chosen.
1
Operation Steps
1. OK / MENU
2. or
3. or
Operation Steps
1. OK / MENU
2. or
3. or
Operation Steps
1. OK / MENU
2. or
3. or
This feature can only be used under
Program Mode.
This feature can only be used under
Program Mode.
This feature can only be used under
Program Mode.
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
20
21
Effect( Default:NORMAL)
Norma l No special effect is added to
the picture.
B& W Turn the image into black
and wh ite.
SEPIA Turn the image into
yellowish brown.
NEGATIVE
Turn the image into negative
film effect .
NOR
EXIT : MENU MOVE:
EFFECT
NOR
NORMAL
B & w
SEPIA
NEGATIVE
Photo Frame ( Default:OFF)
FRAME
MOVE: SET:OK
OFF
ON
You can put the selected photo frame to the
image you capture.
Cancel the Photo Frame function after use
if you prefer the next image not to be with
Photo Frame.
Note
This function can only be used when the
resolution is set at less than 7 mega pixels
(3072x2304).
1
Operation Steps
1. OK / MENU
2. or
3. or
Operation Steps
1. OK / MENU
2. or
3. or
Under Still Image Shooting Mode
Under Still Image Shooting Mode
Exposure Value ( Default:0)
OSD Information(Default:DETAIL)
OSD INFORMATION
EXIT : MENU MOVE:
Operation Steps
1. OK / MENU
2. or
3. or
OFF
BASIC
DETAIL
GRID 3X3
GRID 6X4
To adjust the exposure, you will need to set the working mode at Program
Mode ( ) and press the Delete Button ( ) first.
Press Up or Down to the Exposure Value setting.
You can adjust the value of the exposure compensation which ranges
from -2.0EV to +2.0EV (in 0.5EV increments) with the Right and Left Button.
After the preferred value is chosen, please press OK/Menu Button to confirm
the setting. ( ) will be shown on the TFT LCD Monitor if the EV is not set
+
at 0. Please note that the higher the EV value is the brighter the image will
-
be.
-2 -1 0 +1 +2
Th ere are 5 options for the OSD information.
1.OFF : No OSD information is displayed.
2.BA SIC: On ly basic informat ion is displayed.
3.DETAIL: De tailed informat ion is displayed.
4.GRI D 3X3 : Grid lines for 9 grids will show on
the TFT LCD
Mon itor for you to
compo se the imag e.
5.GRI D 6X4 : Grid lines for 24 grids will
show on the TF T LCD Mon itor
for you to compo se the imag e.
Note
Pl ease choose "OFF " to cancel the grid lines
if you prefer not to use them for the next
imag e.
999
7M
MENU
OK
MENU
OK
MENU
OK
1.
2. or
3. or
Operation Steps
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
23
22
ISH (Image Stabilizer Helper)
Under Still Image Shooting Mode
Under Still Image Shooting Mode
To adjust the ISO value, you will need to set the working mode at Program
Mode ( ) and press the Delete Button ( ) first.
Press Up or Down Button to the ISO setting and choose the ISO value you
prefer and press the OK/Menu
Button to confirm.
ISO Val ue ( Default:AUTO)
AUTO
100 200 400 800
To adjust the white ba lance, you will need to set the working mode at Program
Mode ( ) and pr ess the Delete Button ( ) first.
You can select the most appropriate white balance se tting for a gi ven sh ooting
environme nt by "Custom" setting.
1. Choose the CUSTO M
setting.
2.Put a sh eet of white
in front of the camera,
and then pr ess the
shutter button.
3. Press ok/Me nu Bu tton
to confirm.
White Balance ( Default:AWB(auto white balance))
Aut o Adj us ting the whi te ba lan ce au tomat ically
Day ligh t Under the strong ligh t en viron ment
Sun se t Und er the sunset ligh t environment
Fluores cent Und er the fluorescent ligh t environment
Tungsten Und er the tun gs ten li gh t en viron ment
Cloudy Und er the cl oudy ligh t envi ron ment
Cus tom Und er unce rtai n ligh t en viron ment
To adjust the RGB setting, you will need to set the working mode at Program
Mode ( ) and press the Delete Button ( ) first.
Press Up or Down Button to the RGB setting and choose the RGB setting you
prefer by pressing Left or
Right Button and press OK/Menu Button to confirm.
RGB
999
7M
B
- +
G
- +
R
- +
Pr essing the ISH Bu tton ( ) can ac tivate this function.
This function will only help to "reduce" the ch ance of blurred image du e to
unsteady holding of the came ra.
Note
1. Ima ge no ise may occur with this feature.
2. When you pr efer the next ima ge or movie clip not
to be with ISH feature,
please press the ISH Button ( ) ag ain.
3. When ISH is us ed, the flash will be automa tically set at "Flash Off" and the
ISO value will be set at "AUT O". These settings ca nnot be changed.
4. It is
su ggested to us e this feature under low light conditions when the ob ject
is be yond 3. 0m from the came ra.
1000
8:08 AM
2007/01/05
999
7M
999
7M
999
7M
MENU
OK
MENU
OK
MENU
OK
1.
2. or
3. or
1.
2. or
3. or
1.
2. or
3. or
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
Operation Steps
Operation Steps
Operation Steps
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
25
24
Under Playback Mode ( )Under Playback Mode ( )
Playback Still Image, Movie Clip And Audio ClipOf
Please press Playback Button ( ) and the camera will show the
stored still images, movie clips and audio clips (voice recording). Use
the Right and Left Button to choose the file you would like to play.
1. Still Image
Still images are the images with no special
signs such like ( ) and ( ).
( ) represents that the images are with
voice memos.
2. Movie Clip
Movie clips are the ones with ( ).
1. Audio Clip (voice recording)
Audio
clips are the ones with ( ).
Explore A Part Of A Still Image
Thumbnail Display (Small Images)
100-0002
1
2
By pressing the W Button ( W ) you can display the stored files by
thumbnails (Pressing the T Button ( T ) returns you to the normal
playback display). Select a file and press OK/Menu Button to enlarge the
selected image or file.
1. Pressing and holding the T Button ( T ) you can enlarge a still image up
to 8.0x (depending on the original size of the image).
2. Use the direction buttons to explore the image.
3. By pressing and holding the W Button ( W ) you can
return to the normal
size image.
X 1.6
X 1.6
999
7M
8:08 AM
2007/01/05
MENU
OK
MENU
OK
MENU
OK
1.
2. or
3. or
Operation Steps
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
27
26
Slideshow
Display Image Information
Tri m A Still Image
1. Select an image.
2. Press the T Button( T ) or W Button( W )to choose the size of the
enlargement.
3. Press OK/Menu Button and choose "TRIM" and press the OK/Menu
Button again to confirm the request.
The camera will save the trimmed image as a
new image after you
confirm the request.
Pressing and holding the payback button ( ) can show the image
information. Pressing the playback button ( ) again will cancel the
information display.
Set An Image With Protection
Set Selected Image(s) With Protection
1.Press the OK/Menu Button and choose "PROTECT".
2.Choose "SELECT" and press OK/Menu Button.
3.Choose one image and press T Button ( T ).
4.Choose another image and press T Button ( T ) or W Button( W ).
(
) will show on the TFT LCD Monitor when the protection is set.
5.Press OK/Menu Button to confirm the request for the protection of the
selected image(s).
6.To cancel the protection, please press T Button ( T ) or W Button( W ).
Set All Images
With Protection
1. Press the OK/Menu Button and
choose "PROTECT".
2. Choose "ALL" and press OK/Menu
Button to confirm the request.
( ) will show on the TFT LCD Monitor
when the protection is set.
3. To cancel the protection, please
press
T Button ( T ) and W Button( W ).
100-0021
X1.9
PROCCESSING!
999
SIZE:1792X1344
AV:F3.5
TV:1/17S
ISO:200
FLASH:OFF
DATE:2007/01/05
Press Menu/OK Button to enter the menu and
choose SLIDE.
There are three options in this feature which are:
SHOW
This option is to start the slideshow after you set up
the settings of INTERVAL and EFFECT. In this
option you can also choose to play the slideshow just once
or repeatedly.
INTERVAL
This option is to choose the interval time between each still image.
EFFECT
This option is to choose the effect of the slideshow.
Note
After you complete the setting of INTERVAL and EFFECT, please go to
SHOW PLAY/ REPEAT to start the
slideshow.
8:08 AM
2007/01/05
100-0066
EXIT : SH
W LOCK T
Under Playback Mode ( )Under Playback Mode ( )
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
29
28
Under Playback Mode ( )Under Playback Mode ( )
Delete Image
You can delete the selected image(s) or all images with this function.
Please press OK/Menu Button and choose "DELETE" and following the
steps below.
Delete Single Image
Select the image you'd like to delete and press the Delete Button ( ).
Select "DELETE" to proceed or select "CANCEL"
to cancel the request.
Delete All Image(s)
1.Push the OK/Menu Button.
2.Choose "ALL" and press the OK/Menu Button.
3.Choose "DELETE" to confirm the deleting request or choose "CANCEL"
to cancel the request. Press the OK/Menu Button again to proceed.
EXIT : MENU MOVE:
DELETE
SELECT
ALL
Operation Steps
1. OK / MENU
2. or
3. or
Copy To Card
This function allows you to copy the images stored in the internal flash
memory into the memory card.
EXIT : MENU MOVE:
COPY TO CARD
NO
YES
Operation Steps
1. OK / MENU
2. or
3. or
DPOF-Standard
This function can only be used when a memory card is inserted.
This option allows you to put the print quantity (MAX. 30 pcs) on your
memory card.
[ONE PIC] - specifies the number of copies for a selected
[ALL PICS] - specifies the number of copies for all
pict
Note: You cannot see the "PRINT" function on the TFT LCD Monitor if a
memory card is not inserted.
image and you
can press LEFT/RIGHT Button to go to next image.
ures apart from
movie clips and voice recording files.
EXIT : MENU MOVE:
DPOF
STANDARD 00 PIC
INDEX NO
PRONT SIZE DEF AULT
CANCEL NO
Operation Steps
1. OK / MENU
2. or
3. or
105mm+-2
150mm+-2
105mm+-2 105mm+-2
150mm+-2
105mm+-2
31
30
Set A Still Image As An Option Of The Start-up
Images
Resize A Still Image
This function allows you to resize a still image.
1.Choose the image you would like to resize.
2.Press OK/Menu Button and choose "RESIZE"..
3.Choose the image size you prefer and press OK/Menu Button to confirm.
4.The resized image will be stored as a new image.
This function allows the option of using your own image as the start-up
screen.
1.Choose the image you would like to use.
2.Press OK/Menu Button and choose "RESIZE".
3.Choose"USER IMAGE 1" or "USER IMAGE 2" and press OK/Menu
Button to confirm.
Note
To set the "USER IMAGE 1" or "USER IMAGE 2"
as the start-up image
please refer to "Setting The Start-Up Image".
Under Playback Mode ( )Under Playback Mode ( )
Set An Image With Special Effect
Rotate An Image
o o o
With this setting you can rotate the image RIGHT 90 , LEFT 90 , 180 ,
HORIZONTAL and VERTICAL.
1.Choose the image you would like to rotate.
2.Press OK/Menu Button and choose "ROTATE".
3.Choose the rotation you prefer and press OK/Menu Button.
4.The image after rotation will be stored as a new image.
This function allows you to set an image with special effect.
1.Choose the image you would like to set with a special effect.
2.Press OK/Menu Button and choose "EFFECT"..
3.Choose the special effect you prefer and press OK/Menu Button.
4.The image with the special effect will be stored as a new image.
EXIT : MENU MOVE:
RESIZE
Operation Steps
1. OK / MENU
2. or
3. or
2560 X 1920
2048 X 1536
1600 X 1200
1024 X 768
640 X 480
EXIT : MENU MOVE:
ROTATE
Operation Steps
1. OK / MENU
2. or
3. or
O
RIGHT90
O
LEFT90
O
180
HORIZONTAL
VERTICAL
EXIT : MENU MOVE:
EFFECT
Operation Steps
1. OK / MENU
2. or
3. or
NORMAL
B & W
SEPIA
NEGATIVE
105mm+-2
150mm+-2
105mm+-2
51
50
TV Connection
PC Connection
Connect the USB/Video connector of the camera to video input ports
of the TV set with the supplied Video/USB Cable.
Turn on the TV and switch the TV/Video switch to A/V mode.
Power on the camera and then switch to the Playback Mode.
Press down the LEFT or RIGHT direction
Button to go to the next or
last image for TV reviewing.
When the USB/Video Cable is in connection with the computer while
the camera is on, the camera will automatically go to the PC Mode
from any working mode and turn off TFT LCD monitor.
In this Mode, you
can download images to your computer .
Computer
General Introduction
Computer / Notebook Connection
How to Connect with a Computer
105mm+-2
150mm+-2
105mm+-2
53
52
Installing The Camera's Driver
1
3
2
4
5
2000
Under Microsoft Windows
PC Connection
PC Connection
Under Microsoft Windows 98SE
If the auto run program fails under certain situation, please go
to the Start Menu, click "Run" and key in "CD-ROM Drive:\
AutoRun.exe" and then click "OK" Button.
If the computer h
X 8.0 or later already, the
installation procedure will skip above
step 4 and go to the following window
directly completing the driver
installation.
as been installed with \
Direct
1
2
3
105mm+-2
150mm+-2
105mm+-2
55
54
PC Connection
I nstalling Ulead Photo Explorer
1
3
2
4
565
PC Connection
PC Connection
Having DirectX 8.0 or later already, the
computer will skip the installation
procedure from step 2 above and go to
the following window directly. Please
complete the driver installation with a
"OK" Click.
Under Microsoft Windows ME / XP
Under Mac 9.X or later
The camera's driver is not required
under Windows ME and Windows XP.
Please go to page 57 for installing of
Ulead Photo Explorer or go to page 62
for downloading the stored image(s)
onto the PC. Please click "OK", if the
below window prompts.
This camera, supporting
only Mac 9.X or later versions, does not require
any driver installation. Please refer to Page 59 for installing Ulead
Photo Explorer or Page 63 for downloading the stored images onto
the PC.
Under Windows Operating System (Windows 98SE/2000/ME/XP)
8.5
8.5
8.5
8.5
4
105mm+-2
150mm+-2
105mm+-2
57
56
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
Step :
Turn on the computer.
Step :
Insert the CD into the CD-ROM
Drive. The computer will
create an icon named "Driver
CD" on the desktop.
Step :
Double click on the icon and
choose the language you
prefer by double clicking on
one of the folders below.
1
2
3
PEX 2.0: English
PEX 2.0F: French
PEX 2.0G: German
PEX 2.0I: Italian
PEX 2.0J: Japanese
PEX 2.0P: Portuguese
PEX 2.0S: Spanish
Under Macintosh Operating System (Mac 9.X or later)
8.5
8.5
8.5
8.5
PC Connection
13
7
9
8
PC Connection
PC Connection
14
10
12
11
105mm+-2
150mm+-2
105mm+-2
59
58
Step :
Select PEX2.0 Installer to
install.
4
Step :
Press Continue for the
next step.
5
Step :
6
Step :
7
Step :
Select the folder you just
installed, and press Choose
for the next step.
8
Step :
PEX2.0 will now start to
install.
9
A welcome screen will jump
out. Please press Continue
for the next step.
Please read through the
contract.
If you agree with the
contract, please press
Agree.
If not, please press
Disagree, and installation
will be cancelled
simultaneously.
Step :
Installation completed, please
press Quit to exit.
10
PC Connection
PC Connection
4
6
8
5
7
9
If a warning window shows up
please visit Apple's official
web-site http://kbase.info.
apple.com to download the latest
version of CarbonLib.
a.Key in "CarbonLib" in the search
bar and click "Search" button.
b.Download the latest version of
CarbonLib.
c.Reboot the computer.
d.Go to the desktop and double click
on the
icon "Ulead Photo Explorer"
to start Ulead Photo Explorer.
105mm+-2
150mm+-2
105mm+-2
61
60
PC Connection
PC Connection
Under Windows Operating System (Windows 98SE/2000/
ME/XP)
Downloading the Image(s)
Downloading Image(s) From Removable Disk
1. Tur n on the PC.
2. Switch on the camera.
5. The stored image(s) can be found in"
Removable Disk\Dcim\100media" .
3. Connect the camera to the PC by USB
cable under any working mode. Please
make sure
the USB Cable is well
connected to both the PC and camera.
4. When the USB cable is connected to the
PC, there will be a new hard disk named
Removable Disk showing on the computer.
6. View the image with a double-clicks.
Downloading Image(s) Through Ulead Photo Explorer
1. Connect the camera to the PC by USB
cable under any working mode. Please
make sure the USB cable is well
connected to both the PC and camera.
2. Start Ulead Photo
Explorer 8.5 SE Basic.
3. Click "File \Download From Memory Card"
to get the stored image(s).
Under Macintosh Operating System (Mac 9.X or later)
Downloading Image(s) From Removable Disk
1. Tur n on the PC.
2. Switch on the camera.
D ownloading I mage(s) T hrough U lead P hoto E xplorer
1. Tur n on both the PC and switch on the
camera. Connect the camera to the
PC
by USB table and a new disk such
as "Unlabeled" will be created
automatically.
2. Start with Ulead Photo Explorer
8.5 SE Basic. The stored image(s)
can be found in the folder of DCIM
\
100MEDIA \. Please view the
image(s) with double-clicks.
3. Connect the camera to the PC by USB cable
under any working mode. Please make sure
the USB cable is well connected to both the
PC and camera.
4. When the USB cable is connected to the PC,
there will be a new icon named "untitled"
showing on
the computer.
5. Double click on the icon.
6. The stored image(s) can be found in the
folder of DCIM \ 100MEDIA.
7. View
the image(s) with double-clicks.
105mm+-2
150mm+-2
105mm+-2
63
62
CARD FULL
MEMORY FULL
CARD LOCKED
(ICON BLINKING)
LOCK
NO IMAGE
FILE ERROR
MEMORY ERROR
CARD ERROR
LOW BATTERY !
(ICON BLINKING)
There is insufficient card
memory capacity for
storing an image.
There is insufficient
internal memory capacity
for storing an image.
The memory card is under
protection.
The Image can not be
deleted under protection.
There is no image stored
in the memory card or
built-in flash memory.
File format error.
Memory is damaged
or fails.
Card is damaged or fails.
Battery power is drained.
Delete the stored image(s)
in the memory card or
insert
a new memory card.
Delete the stored image(s)
in the flash memory.
Set the card protection switch
at non-protection position.
Unlock the protected image.
Insert a new memory card
or format the
built-in flash
memory.
Format the memory card or
built-in flash memory.
Insert a new memory card.
Insert a new battery.
Messages Causes Solutions
The environment is too dark
in Flash off or "Night Scene''.
The environment is too dark
in Flash off or "Night Scene''.
LOW LIGHT!
HAND SHAKE ICON
Set the flash mode at Auto
Flash or Fill-in Flash.
Avoid shake.
Set the flash mode at Auto
Flash or Fill -in Flash.
NO PAPER!
Paper has run out.
Please put more paper in the
paper tray of the Printer.
Camera Hangs
1. Remove the battery.
2. Reload the battery.
3. Switch on the camera.
Appendix
Error Message Table
Appendix
Specifications
Internal memory: 32MB flash memory
External memory: supporting SD/MMC card
DPOF1.1,
105mm+-2
150mm+-2
105mm+-2
65
64
Appendix
About ArcSoft ,Inc
Customer Service
For the best experience with your ArcSoft software, register each of your
titles right after you've completed the installation process. Contact our
customer service department if you have any questions or concerns.
Product FAQ
http://arcsoft.custhelp.com/cgi-bin/arcsoft.cfg/php/enduser/std_alp.php?
Search the ArcSoft Knowledge Base to get information on how-to's,
troubleshooting tips, features, and more.
Phone technical support (for registered users only)
http://www.arcsoft.com/support/custservice_phone.asp
Contact our phone support representatives and have your issues resolved
right away.
or later
Appendix
For Windows
(without battery and card)
"Specifications and product desing are subject to change without any notice for further improvement"
105mm+-2
150mm+-2
105mm+-2
67
66
Appendix
You could choose :
1. Open an Existing Project
2. Create a New Video.
3. Create a New Slide Show.
When you choose option and click on next pageyou could edit the files by
following steps:『MEDIA』、『EDIT』、『EFFECTS』、『TEXT
、『NARRATE』、『PRODUCE.
Things You Can Do With "ArcSoft
VideoImpression"
.
Appendix
The software mentioned in this manual is furnished under a License
Agreement which is included with the product. This Agreement specifies
the permitted and prohibited uses of the product.
ICI Library 1991-1992 C-Cube Microsystems.Ulead Systems, Inc. And the
Ulead logo are trademarks of Ulead Systems, Inc. All other product names
and any registered and unregistered trademarks mentioned in this manual
are for identification purposes only and remain the exclusive property of
their respective owners.
Registered users are entitled to Ulead technical support. This We b site has
valuable up-to-date information about Photo Explorer, other Ulead products,
and free downloads. Visi t our We b site at www.ulead.com, or send an e-mail
at support@ulead.com.tw.
Headquarters:Ulead Systems, Inc.
Http://www.ulead.com.tw
E-mail: info@ulead.com.tw
Japan:Ulead Systems, Inc.
Http://www.ulead.co.jp
E-mail: info@ulead.co.jp
Europe:Ulead Systems GmbH
http://www.ulead.de
http://www.ulead.co.uk
http://www.ulead.co.uk/fr
E-mail: info@ulead.de
Technical supports
About Ulead Photo Explorer
Software license
Licenses and trademarks
North & South America: Ulead Systems, Inc.
Http://www.ulead.com
E-mail: info@ulead.com
Asia-Pacific:Ulead System, Inc.
Http://www.asiapac.ulead.com
E-mail: info@asiapac.ulead.com
China: Ulead Systems, Inc.
Http://www.ulead.com.cn
E-mail: info@ulead.com.cn
105mm+-2
150mm+-2
105mm+-2
69
68
Things You Can Do In Ulead Photo
Explorer 8.5 SE Basic
Here's an overview of what you can do in Ulead Photo Explorer. Refer to the
chapters in this user guide for more details.
Acquire images
Acquire images from digital cameras, scanners, or memory card readers.
(picture 1)
Adjust images
Make adjustments to images, such as straighten, rotate, crop, balance
color, remove red eye,
etc. Image adjustments can be applied to
multiple images at one time.(picture 2)
Capture and trim video
Capture video clips from DV camcorders, PC cameras, WebCams,
motion cameras or capture boards. Later, you can trim, convert and
optimize video clips.(picture 3)
picture 1
picture 2
picture 3
Appendix
Browse thumbnails
Ulead Photo Explorer displays files as thumbnails, allowing you to visually browse
through images and media files. (picture 4)
Preview images and other media
Instantly preview images, video and audio files in Photo Explorer without actually
opening them. (picture 5)
View images
Display images in larger views by switching to Viewer mode or opening
images in Ulead Instant Viewer. (picture 6)
picture 4
picture 5
picture 6
Appendix
105mm+-2
150mm+-2
105mm+-2
71
70
Appendix
Print images in various layouts
Output single-image prints, greeting cards, or print images in different photo sizes.
Yo u can also print an index sheet of thumbnails for your image collection. (picture 7)
Create slideshows
Assemble images, video and audio files into
a multimedia slideshow. Apply cool transition
effects to your slideshow. (picture
8)
Output Web thumbnails and Web slideshows
Create Web photo albums and Web slideshows ready to be
uploaded to the Internet. (picture 9)
Share on the Internet
To share selected images on the Web, upload
them to iMira.com, Ulead's free image sharing
Web site. (picture 10)
picture 7
picture 8
picture 9
picture 10
105mm+-2
150mm+-2
105mm+-2
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Minox DC 7411 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Minox DC 7411 in de taal/talen: Engels als bijlage per email.

De handleiding is 10 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Minox DC 7411

Minox DC 7411 Gebruiksaanwijzing - Deutsch - 37 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info