42268

Minolta Vectis 200 Handleiding

4
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
TECHNICAL SPECIFICATIONS
Camera Type: IX240 Lens Shutter Camera
Lens: 25-50mm f/4.8-9.1 power zoom lens
Focusing range: C/H: 0.5m - ∞ (1.64 ft - ∞)
P Wide: 0.5m - ∞ (1.64 ft - ∞), P Tele: 1.0m - ∞ (3.28 ft - ∞)
Film speed range: ISO 25-3200
Metering range (ISO 200):
25mm: EV 4 - 16.2
50mm: EV 4 - 17
Flash range(ISO 200):
25mm: 0.5 - 5.0m (1.64 ft.- 16.4 ft.)
50mm: 0.5 - 2.7m (1.64 ft. - 8.85 ft.)
Battery: One 3-volt CR2 lithium battery
Battery-condition indication:
3-stage indication
Battery performance:
Approx. 12 rolls (25 exp. roll w/ 50% flash)
Viewfinder: Magnification: 0.32X - 0.6X
Field of View (H format): 85% for subject at 3m (9.38 ft.)
Dimensions: 104 x 65 x 39mm (4-1/8 x 2-5/8x 1-5/8 in.)
Weight: 170g (6.0 oz.)
Specifications are based on the latest information available at the time of
printing and are subject to change without notice.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes or modifications not
approved by the party responsible for compliance could void the user's authority to operate the
equipment. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
This mark on your camera certifies that this camera meets the requirements of the EU
(European Union) concerning interference causing equipment regulations. CE stands for
Conformité Européenne (European Conformity).
TITLE IMPRINTING
Two titles from the title list sheet can be preset for use while taking pictures.
Either of the two preselected titles can be selected before the picture is taken.
The selected title is recorded on the film's magnetic strip, then printed on the
back of the print by your certified Advanced Photo System lab.
• Some labs may not be able to print the titles in all of the available languages. See your
photofinisher for details.
•Titles are displayed in the data panel as a title code. Please refer to the Title List for the
titles available with this camera.
*With the camera on and before taking the picture:
1.Press the title button to display the code
for the title you want.
*The sequence is as follows:
—> Title-1 —> Title-2 —> -- -- -- (no display)
2. Take the picture. The magnetic data is
written and the selection is canceled for
the next frame.
PRESELECTING TITLES
Two title codes have been set into memory. You can change one or both title
codes at any time.
1.Close the front cover to turn the camera
off.
2.Select the code for the title you want from
the title list sheet.
3.Press the title button to display the title
code you want to change.
To receive the best possible prints, take your film to a
photolab displaying the Certified Advanced Photo System
logo. Photofinishers displaying this logo have been
certified according to Advanced Photo System guidelines.
Certified photolabs will be able to provide the following services.
1.CHP - Print Format
Your film will be printed according to the format set when the picture
was taken.
2.Date and Title Imprinting
The date, time, and selected title are printed on the back of the picture
in the chosen format.
3.PQI - Print Quality Improvement
The lab will compensate (or not compensate) printing according to the
data recorded on the magnetic data strips.
4.Film is returned in the cassette
To keep the film dust free and aid in organization, film is returned in its
original film cassette. The VEI will be set to ■ to prevent accidental
loading
5.Index Print
An index print showing a numbered image of each frame is included
with your returned order.
REPRINTS
Images are always captured in the H format (High-Vision). You can select any
of the three formats when ordering reprints.
CLEANING
• Keep the AF and AE windows clean or the focus and/or exposure may not be
accurate.
• If the camera body is dirty, gently wipe it clean with a soft, clean, dry cloth.
• To clean the lens surface, first brush away any dust or sand then, if necessary,
moisten a lens tissue with lens cleaning fluid and gently wipe the lens in a
circular motion, starting from the center.
• Never place lens fluid directly on the lens.
• Never touch the lens surface with your fingers.
• Never use alcohol or solvents to clean the camera.
STORAGE
When storing the camera for extended periods of time, please follow
these guidelines,
• Store the camera in a cool, dry, well-ventilated area away from dust and
chemicals. For very long periods, place the camera in an airtight container with
a silica gel drying agent.
• Before using after prolonged storage, always check the camera’s operation to
make sure it is functioning properly.
QUESTIONS AND SERVICE
• If you have questions about your camera, contact your local camera dealer or
write to the Minolta distributor in your area.
• Do not open the film chamber or forcefully remove the cassette if the film
cannot be rewound. Contact an authorized Minolta Service Facility.
• Before shipping your camera for repair, please contact an authorized Minolta
Service Facility for details.
BEFORE IMPORTANT EVENTS
• Check camera operation carefully or take test photographs.
• Minolta is not responsible for any loss which may occur due to an equipment
malfunction.
FILM CASSETTE WARNING
The film used in Advanced Photo System cameras stores some data
magnetically. Do not place the cassette on or near anything that creates a
magnetic field, such as a television or stereo speakers.
CAMERA ERROR
If all the indicators in the data panel blink, or the data panel is blank and the
camera will not function with a fresh battery, remove and reinsert the battery. If
normal operation does not resume, or the camera malfunctions repeatedly,
contact an authorized Minolta Service Facility.
CARING FOR YOUR CAMERA
LAB SERVICES
4.Press the select button, the last digit of the
title code number will blink.
5.Press the adjust button to change its
value.
• Press and hold the adjust button to change the value
rapidly.
6.Press the select button to make the next
digit blink, change its value using the
adjust button.
7.Press the select button to make the
language code blink.
8.Press the adjust button to change the
language code.
9.When the title information is correct, press
the title button.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Minolta-Vectis-200

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Minolta Vectis 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Minolta Vectis 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info