727618
27
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
least 3 times.
-Clean the opened brewing unit under warm running
water. In particular, the stainless steel screen must be
rinsed out well to remove any coffee residue.
- Shake the brewing unit lightly under water
- Dry the brewing unit.
- Replace the brewing unit by turning it into the right po-
sition (the outlet tube facing downwards and to the front),
insert the brewing unit into the guide grooves and push it
completely into the coffee machine.
Push the coffee grounds container back into the appliance and
push the outlet unit into the upper position. Close the door.
Cleaning the brewing unit:
-It enables intensive cleaning of otherwise inaccessible
areas. The cleaning programme must be started when
the following symbol appears on the display:
-The cleaning process takes approx. 8 minutes and
should not be interrupted.
-In case of power failure during the cleaning programme,
it has to be restarted.
-Before running the cleaning programme, the metal sie-
ves in the brewing unit must be clean and wiped dry.
-The cleaning water is collected in the drip tray.
To run the cleaning programme proceed as follow:
-Press button 2 until the function display “ cleaning
programme” is selected.
-The press OK (button 6).
-Thedisplay“cleaningprogramme”ashesinthedisplay,
whilethe“llwatertank”displayispermanentlylit.
-Removethewatertank(7)andllwithmin1Lfresh
water. Insert the water tank again.
-Open the lid of the coffee bean container (N) and the
coffee power shaft (J).
-Put a cleaning tablet into the coffee powder shaft.
-The press OK (button 6).
The appliance will implement several cleaning cycles.
After the cleaning phase is completed, the OK display
will light up permanently.
- Remove and empty the drip tray.
- Press the drip tray back onto the appliance until it
audibly engages.
-Then push OK (button 6).
-The appliance then initiates the rinsing phase and then
the brewing unit is positioned.
-The cleaning program is complete when the “Cleaning
program” function display goes out.
- Remove the drip tray and empty it.
- Press the drip tray back onto the appliance until it
audibly engages.
-Removethewatertank,llitwithcleanwaterandpush
it back in.
The appliance is now ready for operation again in the
last selected coffee mode status.
Running the descaling programme:
-The descaling program enables simple and effective
descaling of your coffee machine. You should descale
the coffee machine at regular intervals, but at least when
the following symbol appears on the display:
Note:
The descaling process runs in 2 phases, takes approx.
10 minutes and should not be interrupted.
In case of power failure during the descalling program-
me, it has to be restarted.
The frequency of descaling depends on the hardness of
the water in your region. Therefore, please do not forget
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Minimoka CM-4758 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Minimoka CM-4758 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info