727618
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Note:
If the following warning appears on the display, the water
tank must topped up before the next drink is dispensed.
Otherwise further function is not possible.
Before inserting the water tank, make sure that it is dry
on the outside. Wipe the water tank shaft dry also before
inserting the water tank.
Filling the coffee bean container:
- Fold back the lid of the coffee container (K).
- Fill the container with fresh coffee beans.
- Then close the container again.
Use:
- Connect the appliance to the mains.
- Turn the appliance on, by pressing the on/off button
andholdingitdownbriey.Duringtheheatingprocedure
(approx.30seconds)thefollowingdisplayashes.
- When the operating temperature has been reached,
the coffee machine automatically performs a rising cycle.
Watermayowhereintothedriptray.
-When the rising cycle is completed, the coffee machine
is ready to use. The following displays light up during
initial start-up:
Determining the water hardness
Beforeusingthecoffeemachineforthersttime,it
should be set to the appropriate water hardness for
your region. You can determine the water hardness with
the help of the test strip (18) supplied with the coffee
machine.
Proceed as follows:
- Dip the test strip into cold water for 1 second and shake
off the excess water. After approximately 1 minute, the
water hardness can read from the pink-coloured areas.
Menu settings
The menu function must be accessed to undertake va-
rious settings – for example, to set the determined water
hardness level.
To do this, press buttons 2 and 3 simultaneously for
approx. 3 seconds.
Thesymboldisplaywillbrieylightupasablinkingline,
then the display will change to the current settings. The
following parameters can be set:
• Water tank illumination via button 2
• Water hardness level via button 3
• Coffee temperature via button 4
• Switch-off time via button 5.
•Savetheentriesandquitthemenubyconrmingwith
OK (button 6). If you do not press OK, the program will
automatically return to the operating mode after approx.
60 sec. without saving the new settings.
Setting and storing the water hardness:
- Switch to the menu function by simultaneously pressing
buttons 2 and 3 for approx. 3 seconds. The function
displaysofthemenuwillashrstinablinkingline,then
the current settings will be displayed.
Then press key 3 repeatedly until the required hardness
degree is set.
The image below shows the displays for the 4 possible
hardness degree settings.
Store the input by pressing “OK” (button 6). All function
displaysofthemenuashforapprox.3secondstocon-
rm.Theappliancethenreturnstothenormaloperating
mode.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Minimoka CM-4758 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Minimoka CM-4758 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info